amazon Bathroom Handicap Safety Grab Bar User Manual

: June 7, 2024
: Amazon

Table of Contents

Bathroom Handicap Grab Bar
- Contents:
- Required Tools
Installation
Safety Information
Specifications
Warranty Information
Feedback
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

amazon Bathroom Handicap Safety Grab Bar User Manual

Bathroom Handicap Grab Bar

Required Tools

Safety Glasses
Pencil
Level
Power Drill
Measuring Tape
Stud Finder
1/8” Drill bit
Philips Screwdriver
Silicon Sealant

Installation

Step 1: Remove Grab Bar Covers

Remove Grab Bar Covers

IMPORTANT: Remember to mount all screws firmly into a wood stud. Use a
stud finder to locate the center point of the stud. Studs are usually 16 inches on center.
• Loosen the grab bar covers from the base by gently twisting and tapping from the bottom of the mounting base.

Step 2: Locate Stud(s) And Position Grab Bar

$Locate Stud$s$ And Position Grab Bar$

Note: Wall stud spacing may vary

Use a stud finder to locate the center point of the stud. Studs are usually 16 inches on center.
$Locate Stud$s$ And Position Grab Bar$
Using a level, place the grab bar on the wall in your desired location. Ensure that the mounting holes are positioned over a wood stud.

Step 3: Mark Mounting Location

Mark Mounting Location

Using a pencil, mark the screw mounting locations.

Step 4: Drill Screw Mounting Holes

Drill Screw Mounting Holes

Place grab bar aside and drill pilot holes as marked by your penciled locations.
IMPORTANT: Ensure holes are drilled into wood stud.

Step 5: Mount Grab Bar

Mount Grab Bar

Mount the grab bar using a Philips screw driver. Ensure that the screws are tightly fastened into a wood stud.
Slide the grab bar covers overtop the mounting plates and snap them into place. If desired, apply Silicon sealant or caulk to the backside of grab bar covers to prevent water infiltration.

Safety Information

WARNING: To reduce the risk of injury, thoroughly read and understand all safety information and instructions provided in this manual. If you do not understand any of the safety information or installation instructions contact a professional for assistance before attempting to install.
WARNING: Install in accordance with these instructions only. Do not attempt to modify or alter this product. After installation, check your grab bar periodically to ensure all screws are tight. Retighten if loose.
IMPORTANT: Mount the grab bar(s) to a secure surface. The manufacture will not accept responsibility for any injury or any damages cause by the lack of wall strength or improper installation.
WARNING: All screws must be mounted directly and firmly into a wood stud. Locate the middle of the stud by using a stud finder or other stud finding method (Studs are usually 16” on center).

Follow instructions along with line drawings in the AmazonBasics installation guide.

Specifications

Warranty Information

To obtain a copy of the warranty for this product:

For US – Visit amazon.com/AmazonBasics/Warranty

For UK – Visit amazon.co.uk/basics-warranty
— or —
** Contact Customer Service** at 1-866-216-1072

Feedback

Love it? Hate it?
Let us know with a customer review.

AmazonBasics is committed to delivering customer-driven products that live up to your high standards. We encourage you to write a review sharing your experiences with the product.

Please visit: amazon.com/review/review-your- purchases#