Rolanstar Height Adjustable Desk Instructions: Assemble & Operate CPT007 Models

: June 7, 2024
: ROLANSTAR

The Rolanstar Height Adjustable Desk Instructions provide a comprehensive guide to assembling and operating the CPT007 models. The manual includes general guidelines, notes, and warnings to ensure safe and proper use of the product. It also features an accessories list, exploded view, and step-by-step instructions for assembly. Additionally, the manual provides detailed instructions on how to operate the desk, including how to adjust the height using the up and down buttons, how to set memory positions, and how to set the lowest and highest height positions. The manual also includes information on how to perform initial settings and restore factory settings, as well as common error codes and their corresponding solutions. Customers can also download a PDF version of the manual for easy reference. Following these instructions will ensure that customers can properly assemble and operate their Rolanstar Height Adjustable Desk for optimal use.

ROLANSTAR Height Adjustable Desk Instructions

General Guidelines

Please read the following instructions carefully and use the product accordingly.
Please keep this manual and hand it over when you transfer the product.
This summary may not include every detail of all variations and considered steps. Please contact us when further information and help are needed.

Notes

Product is intended for indoor use only. It must be assembled and used according to the instructions. The seller does not accept any responsibility for damage or injury resulting from improper assembly or use.
Please avoid long-term exposure to humid environment to prevent mildew.
During assembly, align all screws with the corresponding pre-drilled holes first and then tighten them one by one.
Inspect the screws regularly. Screws may become loose during long-term use. If necessary, retighten them to ensure stability and security.

Warnings

Children are not allowed to assemble the product. During assembly, keep any small part out of reach of children as they may be fatal if swallowed or inhaled.
Children are not allowed to stand, climb or play on the product to avoid serious bodily injury by the toppling.
Keep plastic packing bags out of reach of children to avoid any potential danger, such as suffocation.
Avoid sharp objects and corrosive chemicals to prevent damage to the product or bodily injury.

Up / Down Button

Press the ∧ to raise the desk, when you release the button it will stop. Press the ∨ to lower the desk, when you release the button it will stop. When pressing the ∧ / ∨, the
desk travels a very short distance, so that users can fine-tune the desk height according to preference

Desktop Height Memory Setting

POSITION SETTING: Can set up two memories. Adjust the desktop to the appropriate height with ∧ or ∨ buttons. And then press “1 or 2” button, about 4 seconds until the
display flashes “S -1 or S-2 “, indicating that memory setting is successful. LOCATION QUERY: In the run mode, press any of the 1 / 2 keys to flash the height of the key memory.
POSITION REACHING: In the run mode, when the desktop stops, press any of the 1 / 2 keys twice to adjust to the de sktop height of the key memory. When desktop is moving,
pressing any button can stop it.

The Lowest Height Position Setting

POSITION SETTING: Please adjust the desktop to the appropriate height; and thenhold both “2” and “∨” button for 5 seconds; when the display appears “- d o”, the lowest height is memorized successfully. Once the desktop is dropped to its lowest height position, the display shows “- L o”.
POSITION CANCELLATION:
Option 1 – Refer to the initial setting process.
Option 2 – Adjust the desktop to the lowest height where the display shows “- L o”, hold both “2” and the down button for 5 seconds; at this time, the display will
show “- d o” indicating the set lowest height position has been successfully canceled

The Highest Height Position Setting

POSITION SETTING: Please adjust the desktop to the appropriate height; and then hold both “1” and the up button for 5 seconds; when the display appears “- u p”, the highest
height is memorized successfully. Once the desktop is raised to its highest height position, the display shows “- h I”.
POSITION CANCELLATION:
Option 1 – Refer to the initial setting process.
Option 2 – Adjust the desktop to the highest height where the display shows “- h I”, hold both “1” and the up button for 5 seconds; at this time, the display will show “- u p” indicating
the set highest height position has been successfully canceled..

Initial Settings

（Under normal state, can be operated at any time; Or replace the controller for the first time） Press and hold both the ∧ and ∨ until the display appears ” – – – “, release the keys,
then the tabletop will automatically move up and down. When the top stop moving, the initial setting process succeeds.

Restore Factory Settings

When the display appears error code “rST” or “E16″, press and hold the “V” button for 5 seconds until the display flashes ” – – – “; release the key, then the adjustable desk legs
will automatically move down to its mechanical lowest point, and move up and stop at a factory-preset position. Finally, the desk can work normally.

AUTOMATED EXERCISE REMINDER

Once the desktop stays at a same height position over 45 mins, the display shows “Chr”. The flash of “Chr”will disappears when you press any of button or after 1 minute without any operation. The reminder will work for 3 times in a row.

COMMON ERROR CODE (PROBLEM DESCRIPTION AND SOLUTION)

E01、E02

| Cable Connection Between Desk Leg(s) And Control Box is Loose

(press the up or down button; if it doesn’t work, please check the cable connection)

---|---

E03、E04

| ****

Desk Leg(s) is Overloaded

(press the up or down button; if it doesn’t work, reduce desk load or contact seller)

E05、E06

| ****

Sensing Element in the Desk Leg(s) Fails

(press the up or down button; if it doesn’t work, please check cable connection or contact seller)

E07

| ****

Control Box Breaks Down

(cut off the power supply for a while and restart the desk; if it doesn’t work, please contact seller)

E08、E09

| ****

Desk Leg(s) Breaks Down

(cut off the power supply for a while and restart the desk; if it doesn’t work, please contact seller)

E10、E11

| ****

Controller Components Breaks Down

(cut off the power supply for a while and restart the desk; if it doesn’t work, please contact seller)t

E12| Desk Leg(s) Malposition(refer to the initial setting process)

E13

| ****

Thermal Shutdown Protection (wait for temperature drop)

E14、E15

| ****

Desk leg(s) is Stuck, and or They Do Not Work Properly

(press the up or down button; if it doesn’t work, reduce desk load or contact seller)

E16

| ****

Unbalance Desktop (restore factory settings)

E17

| ****

Key Data Stored in Control Box are Lost (please contact seller directly)

rST

| ****

Abnormal Power-Down

(check the cable connection then restore factory settings)

SPECIFICATION

Product Specifications

Product Name| ROLANSTAR Height Adjustable Desk
Model| CPT007
Intended Use| Indoor use only
Assembly Instructions| Step-by-step instructions provided in manual
Accessories Included| List provided in manual
Height Adjustment| Up and down buttons
Memory Positions| Two memory positions can be set
Lowest Height Position| Can be set and cancelled
Highest Height Position| Can be set and cancelled
Initial Settings| Can be performed at any time or when replacing controller
Factory Settings| Can be restored if necessary
Error Codes| Various error codes and solutions provided in manual
PDF Manual| Available for download

FAQS

**What are the general guidelines for using the Rolanstar Height

Adjustable Desk?**

Customers should read the instructions carefully and use the product accordingly. The manual should be kept and handed over when transferring the product. The product is intended for indoor use only and must be assembled and used according to the instructions.

What are some notes to keep in mind when using the desk?

Customers should avoid long-term exposure to humid environments to prevent mildew. During assembly, they should align all screws with the corresponding pre-drilled holes first and then tighten them one by one. They should inspect the screws regularly and retighten them if necessary to ensure stability and security.

What are some warnings to keep in mind when using the desk?

Children are not allowed to assemble the product or stand, climb, or play on it to avoid serious bodily injury by toppling. Customers should keep any small parts out of reach of children as they may be fatal if swallowed or inhaled. They should also avoid sharp objects and corrosive chemicals to prevent damage to the product or bodily injury.

How many memory positions can customers set for the desktop height?

Customers can set up two memory positions.

How can customers set memory positions for the desktop height?

Customers should adjust the desktop to the appropriate height with the up or down buttons, and then press “1 or 2” button for about 4 seconds until the display flashes “S-1 or S-2”, indicating that memory setting is successful.

How can customers cancel the lowest height position setting?

Customers can either refer to the initial setting process or adjust the desktop to the lowest height where the display shows “- Lo”, hold both “2” and the down button for 5 seconds, and at this time, the display will show “- do” indicating that the set lowest height position has been successfully canceled.

How can customers restore factory settings?

When the display appears error code “rST” or “E16”, customers should press and hold the “V” button for 5 seconds until the display flashes “- – -“, release the key, then the adjustable desk legs will automatically move down to its mechanical lowest point, and move up and stop at a factory-preset position. Finally, the desk can work normally.

What should customers do if they encounter common error codes?

Customers should follow the corresponding solutions for each error code. For example, if the error code is E01 or E02, they should check the cable connection between the desk leg(s) and control box and press the up or down button. If it doesn’t work, they should contact the seller.

Where can customers find more information about the manual and download a PDF version?

Customers can read more about the manual and download a PDF version by clicking on the provided link.