SECURITY SAFE
User Manual

4.5 Cub Large Home Safe Box Fireproof Waterproof

Please read the following instructions carefully to use the product correctly.

1. When you use the safe for the first time, please use both the emergency key and the master key to unlock it, the key s not nside the safe, but in a separate bag.
2.  Please keep this manual properly, f you give the product to others, please give this manual to them.
3.  Please use at least 2 wall anchors to install the safe to ensure stable installation.
4.  Please leave the emergency key outside the safe.
5. If you enter 3 wrong passwords in a row, the beep will last for 60 seconds. If you enter 3 wrong passwords again after 60 seconds, the sound will last for 60 seconds.
6.  If you ose your emergency key accidentally, please find the serial number of the lock on the keyhole and provide the relevant information to us, and we will provide you with a paid key service.

First open:

Please leave the emergency key outside the safe.
Note: When you open the safe for the first time, please take out the emergency key and master key from the accessory bag, insert the key nto the lock hole, turn the key, then turn the knob to open the door. Put 4*1.5V batteries into the battery compartment at last. (The battery compartmentthe is on the top surface of the door). 

1. Handle
2. Door lock
3. Digital keys
4. Display
5. Emergency keyhole Removable shelf
6. inner door
7. lamp
8. Reset button
9. Battery box
10. Socket for external battery box

Operate Instructions:

STEP 1: When the box is in the open state, please correctly install 4 AA batteries confirm it is working.
STEP 2: You can set two sets of passwords. The original password is “1234” and the management code is “123456”. The safe box has a password memory function.
STEP 3: A beep will beep every time when the number key is pressed, indicating that the number is inputed sucessfully.
STEP 4: If you press any keys over 10 seconds, if there is no continuous key input, the safe box will go to a sleep state.
STEP 5: Once it enters the sleep state, all previous operations will be stopped, you should press the “#” key to wake up the screen.
STEP 6: Hidden code function- Before entering the password, you can press the “” key to switch to the hidden code function. The input numbers will not be displayed, but replaced by “o”.
STEP 7: Silencer function- You can use  66″ to turn off the buzzer Sound in sleep state, the screen will display “BELL OFF”, and the sound will be restored after opening the door.
Three ways to open the safe:

1. Use personal password + master key, Press the “#” key to wake up the screen, enter your personal password, then press the confirmation key(#), and then turn the knob to open the safe.
2.  Use the master key+ emergency key, turn the 2 keys, then turn the knob afterwards to open.
3.  Use external battery box+ password, connect the external battery box, press”#” key and then enter the password+confirmation key(#), turn the knob to open.

To close the safe:
Close the door and turn the knob counterclockwise.
Note:

• Please leave the emergency key outside the safe.

  1. If you entered 3 error passwords in a row, the beep will continue for 60 seconds. If 3 error codes are entered again after 60 seconds, the sound will continue for 60 seconds.
  2. If you forget the password or the battery is dead, please use the emergency key and the master key to open the safe and press the reset button (it is located on the left side of the back of the door) to reset the password.
  3.  “#” on the operation panel means confirmation, and “*” on the operation panel means “delete”,
  4.  If your emergency key is accidentally ost, please find the lock serial number on the keyhole and provide the relevant information to us, we will provide you with a paid key service.

The set of changing personal password

1. Open the safe, press the red setting button on the inside of the door, the LCD screen will display'”‘,

2.  Enter a new 3N8 digits personal password and press””#”” button to confirm. When the screen shows -lnto-” it means the password has been changed successfully.
   Step 2, the screen will display the new password again for 1 second and return to the standby mode.

3. Clear function: “”key can clear number, when you entering wrong word, you can press the”” key to clear last digit.

4. The change is not completed: If not press any keys within 10 seconds, it will exit the modification state (the password is still the original password) and return to the standby state.

How to change the settings of the management password

1. Press # 00″ twice time.
2.  Press the red button behind the door.
3. . Enter the new 3-g password+ “#”key. When “-Into-” is displayed on the screen, t means that the password has been changed successfully.

Tip: The administrative password can be used as a backup password, so someone other than the user does not know there is a second password, also t can be eft unchanged.

Open the door prompt

After entering the correct personal password or management password, press the

key to confirm, the buzzer will beep twice, the electromagnet will be closed

for 6 seconds, the screen will display “-OPEN-“, and the safe box can be opened.
If the password is not entered correctly, press the “#” key to confirm, the buzzer will beep three times, and the screen will display “-Error”.
Clear function: n the process of entering a new password, each time the “*” key s pressed, the ast digit entered can be cleared.
If the wrong password is entered three times in a row, the horn will sound for 60 seconds. At this time, enter the correct password, the screen will display “-OPEN–“, and the alarm will stop.
Undervoltage prompt
When the door is opened, “-OPEN-” is displayed on the screen and then “L-BAT” is displayed, it means that the battery is under voltage, please replace the battery in time.
Setting and releasing of vibration alarm:
In the sleep state, press the “0” key once, the screen will display “ALM ON” and enter the alarm alert state, the safe will alarm when it is vibrated. The screen displays the alarm horn sign and ” “, and the screen displays “OPEN” after inputting the correct password. If you do not enter the correct password, after one minute of code, the alarm will stop automatically, but the alarm will not be lifted.
Date and Clock Settings

1. When the safe box is powered on for the first time, the year, month, day and time are 00-01-01 and 00-00, Saturday. Enter the correct password to open the door, when the display shows “open” disappears, within 2 seconds, press the “s” key, the display shows the year, month and day 00-01-01, when the date or time is displayed, the flashing numbers can be directly entered into the number setting,
   after the previous digit is set, the system defaults to the parameters set by the previous digit when setting it for the second time. When the date is set, the week is automatically updated to the corresponding date parameter.

8. Check the open door record query

1. Enter the correct password to open the door, when the display shows “open” and disappears, within 2 seconds, press the “0” key.
2. The display screen will shows the last time the door was opened, the date first, then the time, and then which password was used to open the door. “PASS1” is the personal code to open the door. “PASS?” is the management password to open the door. When the “PASS1” or “PASS2” displayed on the display and they have not disappeared, please press the “0” key again, then the last door opening record will be displayed, (0 key is the next one, 8 key is the previous one A) The time records of 45 door openings can be viewed. Electrical Standard

Parts list:

Please keep the emergency keys out of the safe.

Specifications:

Main Machine:

QA:

1. What should I do if I forget my password or my battery runs out?

A: You can use the emergency key to open the door, or use external battery box connect the safe.

2. If my emergency key is lost, can I match it?

A: Yes, you can verify your identity and provide a serial number on the lock slot of the safe to provide you with a key (you will need to pay for a matching key).

3. How to turn off the alarm buzzer after entering the wrong password three times in a row?

A: You can turn off the beeps by entering the correct password or removing the battery.

4. Under what circumstances s the safety system prone to failure?

A: In a humid environment, it will be broken easily.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>