Jabra Move Wireless Headphone User Manual

: June 7, 2024
: Jabra

JABRA MOVE WIRELESS

Jabra Move Wireless Headphone jabra.com/movewireless

User Manual

WELCOME

Thank you for purchasing the Jabra Move Wireless. We hope you will enjoy it!
JABRA MOVE WIRELESS FEATURES

Premium wireless sound experience – amplifies without distortion. Brings out the depth and clarity of your music
Seals the sound – angled ear cups allow you to hear all the music
Easily connect with any device via Bluetooth 4.0
Life proof – lightweight, comfortable headphones built & tested for life on the move
Premium materials – stainless steel
Wired option – detachable cord for when you need to be wired

WHAT’S IN THE BOX

Jabra Move Wireless Headphone- WHAT’S IN THE
BOX

HOW TO WEAR

Jabra Move Wireless Headphone- HOW TO
WEAR

HEIGHT ADJUSTMENT

Get the perfect fit by adjusting the headband, as illustrated. Jabra Move
Wireless Headphone- HEIGHT ADJUSTMENT

HOW TO CHARGE

Plug the headphones into any available USB port on your PC using any micro-USB cable.

Jabra Move Wireless Headphone- HOW TO CHARGE

BATTERY STATUS

Tap the Multi-function button when not on a call to see the battery status. It takes 1-2 hours to fully charge the headphones.

LED	COLOR	BATTERY LEVEL
Green	Medium/High
Red	Low
Flashing red	Critically low

HOW TO CONNECT

The Jabra Move Wireless will automatically attempt to Bluetooth connect to a mobile device whenever it is powered on (unless already connected to a Bluetooth device). Simply follow the voice-guided connection instructions.

BLUETOOTH CONNECT TO A NEW OR SECOND MOBILE DEVICE

1. Hold the On/Off/Pairing switch in the Pairing position for 3 secs.
2. Pairing mode will be announced in the headphones, and the Bluetooth light will flash blue.
3. Follow the voice-guided instructions to connect to your Bluetooth device.

Jabra Move Wireless Headphone-- BLUETOOTH CONNECT T

NOTE: If two mobile phones have been connected to the Jabra Move Wireless, you may need to select which phone will be used for calls/music. Simply open the Bluetooth menu on the mobile phone you wish to use for calls/music and select Jabra Move Wireless from the list of devices.

5.2 CONNECT TO 3.5 MM JACK CONNECTOR

Connect the headphones to a 3.5 mm jack connector on your mobile device or PC using the supplied audio cable.

Jabra Move Wireless Headphone- CONNECT TO

NOTE : Bluetooth connections are disabled when connected to the 3.5 mm Jack Connector.

HOW TO USE

Jabra Move Wireless Headphone- HOW TO USE

MUSIC & CHAT

The buttons on the headphones enable you to control your music and phone calls.

| FUNCTION| HOW TO DO IT
---|---|---
| Pause/play music| Tap the Multi-function button
Jabra Move Wireless Headphone--Skip track | Adjust volume| Tap the Volume up or
Volume down button
Skip track| Press and hold either the
Volume up or Volume down button
Battery status| Tap the Volume up or Volume down button, when not on a call
| Answer/end call| Tap the Multi-function button
Reject call| Press and hold (1 sec) the
Multi-function button
Redial last number| Double-tap the Multifunction button

TURN HEADPHONES ON/OFF

Slide the On/Off/Pairing switch to On or Off.

Jabra Move Wireless Headphone-- TURN HEADPHONES

MULTIPLE CALL HANDLING

The headphones can accept and handle multiple calls simultaneously.

| FUNCTION| HOW TO DO IT
---|---|---
| Put the current call on hold and answer an incoming call| Press (2 secs) the Multifunction button
Switch between held call and active call| Press (2 secs) the Multifunction button
Reject incoming call| Double-tap the Multifunction button

VOICE GUIDANCE

CLICK TO LISTEN	WHAT YOU HEAR
To connect Move, go to the Bluetooth menu on your phone and select it from

SUPPORT

FAQ

View the full FAQ at jabra.com/movewireless

FACTORY RESET

To factory reset the headphones and clear the pairing list, press and hold (5 secs) both the Volume up button and the Multi-function button at the same time.

HOW TO CARE FOR YOUR HEADPHONES

Always store the headphones with the power off and safely protected.
Avoid storage at extreme temperatures (above 85°C/185°F or below -20°C/-4°F). This can shorten battery life and may affect operation.
High temperatures may also degrade performance.
Do not expose the headphones to rain or other liquids.

TECHNICAL SPECIFICATIONS

JABRA MOVE HEADPHONES	SPECIFICATION
Weight:	150 grams
Dimensions:	H 172 mm x W 146.1 mm x L 59 mm
Microphone:	4 mm Omni-directional microphone
Speaker:	40 mm dynamic speaker
Operating range:	Up to 10 meters (33 feet)
Bluetooth version:	4.0
Paired devices:	Up to 8 devices, connected to 2 at same time (MultiUseTM)
Supported Bluetooth profiles:	Headset profile v1.2, Handsfree profile v1.6,