JD Williams Elise Rectangular Dining table Instructions
- June 7, 2024
- JD Williams
Table of Contents
JD Williams Elise Rectangular Dining table
Dimensions
Width:120cm
Depth: 75cm
Height: 76cm
Assembly Time
20 minutes
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the JDW Customer
Helpline: 0871 231 2000
Safety and Care Advice
Important- Please read these instructions fully before starting assembly
- Check you have all the components and tools listed on next pages.
- Remove all fittings from the plastic bags and separate them into their groups.
- Keep children and animals away from the work area, small parts could choke if swallowed.
- Make sure you have enough space to lay out the parts before starting.
- Do not stand or put weight on the product, this could cause damage.
- Assemble the item as close to its final position (in the same room) as possible.
- Assemble on a soft, level surface to avoid damaging the unit or your floor.
- We do not recommend the use of power drill/drivers for inserting screws, as this could damage the unit. Only use hand screwdrivers.
- Dispose of all packaging carefully and responsibly.
- Warning : Do not over tighten the handle screw that way break the mirror.
Care and Maintenance
- Please clean using cloth with glass cleaner, do not use bleach or abrasive cleaners.
- From time to time check that there are no loose screws on this unit.
- This product should not be discarded with household waste. Take to your local authority waste disposal centre.
Exploded View
Components – Panels
Please check that you have all the components listed below before constructing your items.
| Part No | Description | Qty |
|---|---|---|
| A | Table Top | 1 |
| B | Leg | 4 |
Components – Fixings
Please check that you have all the components listed below before constructing
your items.
Note: The quantities below are the correct amount to complete the
assembly. In some cases more fittings may be supplied than are required.
*Hardware packed separately according to the code.
Tools Required
Ruler – Use this to measure your screws (mm)
Assembly Instructions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>