CUPRA 2021 Born User Guide

: June 4, 2024
: CUPRA

Table of Contents

CUPRA 2021 Born
SWITCHING ON
INFOTAINMENT
CONNECTIVITY
ELECTRICAL CHARGE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CUPRA 2021 Born

SWITCHING ON

AUTOMATIC CONNECTION OF THE DRIVE SYSTEM

AUTOMATIC DRIVER DETECTION

Enter the vehicle
The Digital Cockpit displays: Confort Ready:
Air conditioning and infotainment available
Press the brake pedal
The Digital Cockpit displays:
Park :
Vehicle on and stopped in a park status
Select D or R on the gear selector
The Digital Cockpit displays: Ready :
Vehicle ready to drive

NEW FEATURE WITH CUPRA!
Possible to switch on the vehicle’s ignition without pressing the Start ENGINE Stop button

AUTOMATIC OFF

Brake to stop (if Autohold is not on, press P on the selector)
The Digital Cockpit displays: Ready :
Vehicle on and stopped, ready to drive
Leave the vehicle (no need to press the Start ENGINE Stop button)
The Digital Cockpit displays: The vehicle is switched off by automatic driver detection
Activate door locking
The Digital Cockpit displays:

RECOGNISE WHETHER THE DRIVE SYSTEM IS ON OR OFF

With the drive system on
The Digital Cockpit displays the speedometer / speed indicator:
With the drive system off
The Digital Cockpit displays the Cupra Born car:

INFOTAINMENT

ACCESS ROUTE TO THE DIGITAL MANUAL

With the Main Menu in “tile” mode , press:
Help > Vehicle wallet

Infotainment reset
As with most state-of-the-art computer and electronic equipment, in certain cases the system may need to be rebooted to make sure that it operates correctly. To do this, if appropriate, press and hold the On/Off button of the infotainment system for approx. 15 seconds until the CUPRA logo appears on the display.

CONNECTIVITY

CUPRA CONNECT REGISTRATION PROCESS

Use the My CUPRA App to register:

Don’t have the My CUPRA App yet?
Download it here:

To make registration easier, watch the following video for a step-by-step explanation of the registration process: Download the “How to register” video here

Create a CUPRA ID, log in and complete your profile
CUPRA ID
Link the vehicle to your CUPRA ID
Enter the vehicle identification number, accept the legal terms and conditions. Order service packs.
Enter the vehicle identification number
Scan the QR code generated by the Infotainment system
Scan the QR code or enter the CUPRA ID credentials
Go to MyCUPRA App and select the preferred Authorised Service*
Registration complete
Complete as primary user

ELECTRICAL CHARGE

CHARGING THE HIGH-VOLTAGE BATTERY

Make sure that the cable is connected correctly (the cable must be locked by the vehicle).Start the process by following the instructions of the charging point.
Check the charging status using the indicator light on the charging cover. For more information, see the sticker next to the charging socket itself or the “Charging the high-voltage battery” chapter of the user manual.
The connector remains locked during the charging process.
At the end of the charging process, remove the cable and store it in the vehicle if necessary.

White LED

Flashing: Preparing the charging process.
Permanently on: Not charging

Green LED

Flashing: The battery is charging.
Permanently on: Process completed without problems, full charge.
Sparkling: If programmed charging has been activated, the charging process has not yet started.

LED alternately flashing green and red

Emergency charge at reduced power due to a charging connector recognition fault.

Red LED

Permanently on: Fault in the charging system. If it remains on after several attempts, seek specialist assistance.

Warning!
To end the charging process manually, press the open button on the central locking remote control or press “Stop Charging” in the infotainment system’s e-Manager menu. You can now disconnect the cable. For more information, see the “Charging the high voltage battery” of the user manual.

TIPS TO MAXIMIZE VEHICLE RANGE

Pre-air condition the vehicle interior when charging to maximise range. This means that the energy needed to initially air condition the vehicle will not be taken from the battery.
Whenever possible, use the heated seats instead of the heating system. The heated seats consume much less energy than the heating and avoid unnecessary loss of range.
The vehicle’s range prediction is based on how the car is usually used. Neither gradients nor the outside temperature are taken into account. Constant and efficient driving is recommended to achieve an optimal prediction.

OTHER TOPICS OF INTEREST

How to pair a mobile phone
To pair a mobile phone, please refer to the section “Pairing, connecting and managing” in the “Telephone Interface”chapter of the user manual.
Multi function steering wheel buttons: For functions and operating logic, please refer to the “Multi function steering wheel” and “Driver assistance systems” sections of the user manual.
For the head-up display (HUD) windscreen display with augmented reality (AR), please see the “Head-up-Display” chapter of the user manual.
Access the Cubic portal to purchase data for your vehicle. Create your account, add your vehicle identification number (VIN) and choose from a range of data plans. Cubic website: https://cupra.cubictelecom.com

If necessary, to release the parking brake so that the vehicle can be pushed: Press the brake pedal and select the N position on the gear selector. Next, confirm “Activate rolling” in the Infotainment System. Or, open the vehicle settings: Vehicle > Assistants > Parking Assistants > Brakes and turn on the function.

SEAT S.A. is permanently concerned about continuous development of its types and models. For this reason we ask you to understand, that at any given time, changes regarding shape, equipment and technique may take place on the car delivered. For this reason no right at all may derive based on the data, drawings and descriptions in this current handbook. All texts, illustrations and standards in this handbook are based on the status of information at the time of printing. Except for error or omission, the information included in the current handbook is valid as of the date of closing print. Re-printing, copying or translating, whether total or partial is not allowed unless SEAT allows it in written form. SEAT reserves all rights in accordance with the “Copyright” Act. All rights on changes are reserved. ❀ This paper has been manufactured using bleached non-chlorine cellulose. © SEAT S.A.