CORSAIR Premium Wireless Gaming Headset 7.1 Surround Sound User Guide
- June 7, 2024
- Corsair
Table of Contents
VOID RGB ELITE WIRELESS
VOID RGB ELITE WIRELESS
Premium Wireless Gaming Headset with 7.1 Surround Sound
**CONTROLS AND FEATURES
**
| A | Headband adjustment | G | Status LED (RF, battery) |
|---|---|---|---|
| B | Power button | H | Jog dial (volume + EQ) |
| C | Mute button | I | Charging port |
| D | RGB light (user-programmable) | J | Wireless sync LED indicator |
| E | Microphone foam windscreen (removable) | K | Pairing button |
(transmitter paired by default)
F| Mic LED (mute)| |
GETTING
STARTED WITH YOUR VOID RGB ELITE WIRELESS HEADSET
Connect the wireless USB transmitter to any working USB port on your PC. The headset is designed to operate at a range of up to 40 feet (12m) from the wireless transmitter, but other wireless devices, electronics, and obstructions such as walls may reduce wireless range.
IMPORTANT: The first time you use the CORSAIR VOID RGB ELITE WIRELESS Headset on a PC, the operating system will automatically install the device driver. After the device driver loads, we recommend you reboot your PC before use. Prolonged listening at high volumes may adversely affect your hearing. Take breaks between sessions and always begin with the volume at the lowest possible level before increasing.
iCUE
Go to corsair.com/support/downloads to download the iCUE Software. Using the
iCUE software will enable the full feature set of your headset.
NOTE: If the headset is used without software, some features will be
disabled.
Install the iCUE software on a PC running Windows 7, Windows 8.1, Windows 10 or later.
After installation is complete, reboot your PC, and launch iCUE.
iCUE SOFTWARE CAN BE USED TO
Choose your RGB color preference and light intensity.
Select and customize audio equalizer (EQ) settings.
Adjust microphone input volume, and microphone sidetone.
Set 7.1 surround sound on or off.
The software’s built-in documentation explains how to use the headset’s features in greater detail.
STATUS LED INDICATIONS
Single blink red = connected, battery low
Single blink green = connected, battery normal
Rapid blink red = disconnected, battery low
Rapid blink green = disconnected, battery normal
Solid amber = battery charging
Solid green = battery charged
Rapid blink amber = pairing mode
CHARGING
The CORSAIR VOID RGB ELITE WIRELESS Headset must be fully charged before its first use.
Connect the USB charging cable to any working USB port on your PC.
Connect the USB charging cable to the CORSAIR VOID RGB ELITE WIRELESS Headset.
The CORSAIR VOID RGB ELITE WIRELESS Headset battery has no “memory effect”, so there is no need to completely discharge it before recharging.
Remember that the USB charging cable requires a high power (USB 2.0 or better) port. Some USB ports found on older devices do not support USB 2.0.
AUDIO SETTINGS
Short key press (.1-.5 seconds) on JOG DIAL toggles EQ.
Medium keypress (.6-2 seconds) on JOG DIAL toggles 7.1 surround sound.
MIC CONTROL
Short key press (.1-.5 seconds) on mic mute button toggles mute on and off.
Long key press (2-4 seconds) on mic mute button toggles sidetone on and off.
NOTE: iCUE software can also be used to control these features.
FOR OPTIMAL WIRELESS PERFORMANCE
Place the wireless USB transmitter in an open, unobstructed area.
Make sure the battery is fully charged before initial use.
Do not leave the battery fully discharged for long periods. Battery life is maximized by keeping the battery in a partially charged state.
If RGB lighting effects are unimportant to you, they can be disabled with iCUE to extend battery life.
Remove the USB charging cable promptly after the headset has been fully charged.
Keep the headset at room temperature (20-30°C or 68-86°F).
PREVENTION OF HEARING LOSS:
Listening to sound at a high volume may permanently damage your hearing.
Background noise, as well as continued exposure to high volume levels, can
make sounds seem quieter than they actually are.
For specific product documentation, please visit: corsair.com/documentation.
To prevent possible hearing damage, do not listen to high volume levels for
long periods.
CORSAIR MEMORY, Inc. declares that this equipment is in compliance with Directive 2014/30/EU and Directive 2011/65/EU. A copy of the original declaration of conformity can be obtained at “regulatory@corsair.com”. Operating temperature: 0°C~+40°C.
NOTE ON ENVIRONMENTAL PROTECTION
After the implementation of the European Directive 2012/19/EU in the national
legal system, the following applies:
Electrical and electronic devices may not be disposed of with domestic waste.
Consumers are obliged by law to return electrical and electronic devices at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual, or the package indicates that a product is subject to these regulations. By recycling, reusing the materials, or other forms of utilizing old devices, you are making an important contribution to protecting our environment.
VOID RGB ELITE WIRELESS
WEB: corsair.com
PHONE: 888-222-4346
SUPPORT: support.corsair.com| BLOG:
corsair.com/blog
FORUM: forum.corsair.com
YOUTUBE: youtube.com/corsairhowto
---|---
© 2019 CORSAIR MEMORY, Inc. All rights reserved. CORSAIR and the sails logo
are registered trademarks in the United States and/or other countries. All
other trademarks are the property of their respective owners. Product may vary
lightly from those pictured. 49-001921 AA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>