Privia Casio Music Gear User Guide

Casio Music Gear

Cover
EN
PX-S1000
USER’S GUIDE
Initial Setup

Preparing a Power Supply
Playing the Digital Piano

Turning Power On or Off

Using a Pedal

Using Headphones

Selecting a Single Tone

Layering Two Tones

Changing the Pitch

Splitting the Keyboard Between Two Tones

Using the Metronome
Adding Depth to Notes

Specifying the Tempo
Changing Sound Reverberation and Ambiance

Changing the Pitch in Semitone Steps (Transpose)

Fine Tuning a Pitch (Tuning)

Using Chorus

Listening with Auto Playback

Recording Performances Connecting with a Smart

in Real-Time

Device

Using the Sound Mode Effects (Hall Simulator and Surround)

Listening to Songs (Music Library)

Recording and Playing Back Linking with a Smart Device

Performances (MIDI Recorder)

(APP Function)

· When the Digital Piano is being operated on battery power only, notes may sound distorted when performing or playing back a song at maximum volume. This is due to the difference between AC adaptor power and battery power, and does not indicate Digital Piano malfunction. If you notice distortion, switch to AC adaptor power or lower the volume level.

Included and Optional Accessories
Use only accessories that are specified for use with this Digital Piano. Use of unauthorized accessories creates the risk of fire, electric shock, and personal injury. · You can get information about accessories that are sold separately for this product from the CASIO catalog available from
your retailer, and from the CASIO website at the URL or QR code below. https://support.casio.com/global/en/emi/manual/PX-S1000/
About Music Score data
You can download music score data as a PDF file from the CASIO website, which you can access using the URL or QR code below. You will then be able to view music scores on your smart device. You can jump from the PDF file table of contents directly to the music score you want, and you can print out scores as needed. https://support.casio.com/global/en/emi/manual/PX-S1000/
· Any reproduction of the contents of this manual, either in part or its entirety, is prohibited. Except for your own, personal use, any other use of the contents of this manual without the consent of CASIO is prohibited under copyright laws.
· IN NO EVENT SHALL CASIO BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, LOSS OF INFORMATION) ARISING OUT OF THE USE OF OR INABILITY TO USE THIS MANUAL OR PRODUCT, EVEN IF CASIO HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
· The contents of this manual are subject to change without notice. · The actual appearance of the product may be different from that shown in the illustrations in this User’s Guide. · Company and product names used in this manual may be registered trademarks of others.
EN-1

Contents

Overview and Setup

EN-3

General Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . EN-3

Preparing a Power Supply . . . . . . . . . . . . . . . . . . . EN-5 Turning Power On or Off . . . . . . . . . . . . . . . . . . . . . EN-6
Auto Power Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EN-7
Using a Pedal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EN-7

Using Headphones . . . . . . . . . . . . . . . . . . . . . . . . . EN-8

Operations Common to All Modes

EN-8

Touch Button Operations . . . . . . . . . . . . . . . . . . . . EN-8

Notification Tones . . . . . . . . . . . . . . . . . . . . . . . . . . EN-9

Digital Piano Operations

EN-10

Listening to Demo Play . . . . . . . . . . . . . . . . . . . . . EN-10

Selecting a Tone . . . . . . . . . . . . . . . . . . . . . . . . . . EN-10
Selecting a Single Tone . . . . . . . . . . . . . . . . . . . . . . EN-10 Layering Two Tones . . . . . . . . . . . . . . . . . . . . . . . . . EN-11 Splitting the Keyboard Between Two Tones . . . . . . . EN-12
Changing Keyboard Response to Touch Pressure (Touch Response) . . . . . . . . . . . . . . . EN-12
Changing the Pitch in Semitone Steps (Transpose) . . . . . . . . . . . . . . . . . . . . . . . . . . . . EN-13

Fine Tuning a Pitch (Tuning). . . . . . . . . . . . . . . . . EN-14
Changing the Pitch in Octave Units (Octave Shift) . . . . . . . . . . . . . . . . . . . . . . . . . . . EN-14
Using the Sound Mode Effects (Hall Simulator and Surround) . . . . . . . . . . . . . . EN-15

Using Chorus . . . . . . . . . . . . . . . . . . . . . . . . . . . . EN-17 Using Brilliance . . . . . . . . . . . . . . . . . . . . . . . . . . . EN-17

Adjusting Acoustic Piano Sound Characteristics (Acoustic Simulator). . . . . . . . . . . . . . . . . . . . . . EN-18

Using the Metronome . . . . . . . . . . . . . . . . . . . . . . EN-20 Specifying the Tempo . . . . . . . . . . . . . . . . . . . . . . EN-21

Splitting the Keyboard for Duet Play . . . . . . . . . . . EN-22 Changing the Scale Tuning (Temperament)
of the Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . EN-23 Listening to Songs (Music Library) . . . . . . . . . . . . EN-24

Recording and Playing Back Performances (MIDI Recorder) . . . . . . . . . . . . . . . . . . . . . . . . . EN-26
Creating a Recording . . . . . . . . . . . . . . . . . . . . . . . . EN-27 Playing Back Recorded Content . . . . . . . . . . . . . . . . EN-28

Configuring Settings

EN-29

Adjusting the Upper1 Part Volume . . . . . . . . . . . . .EN-29

Configuring Upper2 Part and Lower Part Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .EN-30

Adjusting the Volume Balance . . . . . . . . . . . . . . . .EN-31

Audio-In Center Cancel . . . . . . . . . . . . . . . . . . . . .EN-31

Configuring MIDI Settings. . . . . . . . . . . . . . . . . . . .EN-32

Changing Pedal Functions . . . . . . . . . . . . . . . . . . .EN-33

Other Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . .EN-34

Factory Reset (Initialization) . . . . . . . . . . . . . . . . . .EN-36

Linking with a Smart Device (APP Function) EN-37

Troubleshooting

EN-38

Reference

EN-40

Product Specifications . . . . . . . . . . . . . . . . . . . . . .EN-40

Tone List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .EN-42

Music Library List . . . . . . . . . . . . . . . . . . . . . . . . . .EN-43

MIDI Implementation Chart

EN-2

Overview and Setup
General Guide
Front Panel

1

2

3

4

5

6

7

8

9

*1

A0 C1

C2

C3

C4

C5

C6

C7

C8 *2

Front

bk

1 P (Power) button 2 Volume knob 3 FUNCTION button 4 SOUND MODE button 5 METRONOME button

6 a button 7 0 (REC) button 8 GRAND PIANO button 9 ELEC. PIANO button bk PHONES jacks

*1 Touch buttons Buttons 3 through 9 are touch buttons whose lights light when power is turned on.

*2 Keyboard note names and pitches The keyboard note names and pitches used in this manual follow the international standard. Middle C is C4, the lowest C is C1, and the highest C is C8. The illustration below shows keyboard key note names from C4 through C5.

C{4 E}4

F{4 A}4 B}4

C4 D4 E4 F4 G4 A4 B4 C5

EN-3

Overview and Setup

Back bl

bm

bn

bo

bp

bq

bl USB port

bm DAMPER PEDAL jack bn PEDAL UNIT jack bo AUDIO IN jack bp LINE OUT R, L/MONO jacks bq DC 12V terminal

Preparing the Music Stand

Music stand

EN-4

Preparing a Power Supply
Your Digital Piano uses an AC adaptor for power.

· Though this Digital Piano supports battery operation, use of an AC adaptor is generally recommended.
Using the AC Adaptor
Make sure that you use only the AC adaptor specified for this Digital Piano. Use of a different type of AC adaptor can cause malfunction.
Specified AC Adaptor: AD-A12150LW (JEITA Standard plug)

bq DC 12V

Household power outlet

Power cord
AC adaptor
· Never connect the AC adaptor (JEITA Standard, with unified polarity plug) that comes with this Digital Piano to any other device besides this Digital Piano. Doing so creates the risk of malfunction.
· Be sure to turn off Digital Piano power before connecting or disconnecting the AC adaptor.
· The AC adaptor will become warm to the touch after very long use. This is normal and does not indicate malfunction.

Overview and Setup
· Note the important precautions below to avoid damage to the power cord.
During Use · Never pull on the cord with excessive force. · Never repeatedly pull on the cord. · Never twist the cord at the base of the plug or connector.
During Movement · Before moving the Digital Piano, be sure to unplug the AC adaptor from the power outlet.
During Storage · Loop and bundle the power cord, but never wind it around the AC adaptor.
· Never insert metal, pencils, or any other objects into the product’s DC12V terminal. Doing so creates the risk of accident.
· Do not try to use the power cord that comes with the product with another device.
· Plug the AC adaptor into a power outlet that is close to the Digital Piano. This lets you immediately unplug from the power outlet should any problem occur.
· The AC adaptor is intended for indoor use only. Do not leave it in a location where it can become wet. Also, do not place a vase or any other container of liquid on the AC adaptor.
· Make sure that the AC adaptor does not become covered with a newspaper, table cloth, curtain, or any other type of fabric.
· If you do not plan to use the Digital Piano for a long time, unplug the AC adaptor from the power outlet.
· The AC adaptor cannot be repaired. If your AC adaptor malfunctions or becomes damaged, you need to purchase a new one.
· AC Adaptor Usage Environment Temperature: 0 to 40°C Humidity: 10% to 90%RH
· Output Polarity: &

EN-5

Overview and Setup
Using Batteries
· Be sure to turn off power before loading batteries. · It is up to you to prepare six commercially available
alkaline batteries. · Note the precautions below while the Digital Piano is
turned upside down to load batteries. – Take care to avoid injury due to pinching your
fingers under the Digital Piano. – Do not allow the Digital Piano to tip over or otherwise
be subjected to strong impact. Impact can damage the volume knob and keyboard keys.
1. Open the battery cover on the bottom of the Digital Piano.

Turning Power On or Off
1. Before turning on power, rotate the 2 volume knob as far as it will go in the direction shown in the illustration below.
2. Press the 1P (Power) button to turn on power.

2. Load six AA-size batteries into the battery compartment. Make sure the positive + and negative – ends of the batteries are facing as marked on the Digital Piano.
3. Insert the tabs of the battery cover into the holes along the side of the battery compartment, and close the cover.
Tabs

Turning on power will cause the lights of the front panel touch button to light in sequence from left to right (3 FUNCTION to 9 ELEC. PIANO). The Digital Piano is ready to play when all touch button lights are lit. · After pressing 1P (Power) to turn on power, do not
press any pedal until the Digital Piano is ready to play (all touch buttons lit). · Power may not turn on if you press the 1P (Power) button too lightly. This does not indicate malfunction. If this happens, apply more pressure when you press the 1P (Power) button.
3. Use the 2 volume knob to adjust volume.
4. To turn off power, hold down the 1P (Power) button until all lit touch button lights turn off.

Low Battery Indication
Low power is indicated when the lights of all the touch buttons (except 3 FUNCTION) start to flash. When this happens, replace batteries.
· Using the Digital Piano while batteries are very low can cause it to turn off suddenly. This can cause data stored in Digital Piano memory to be corrupted or lost.

· Pressing the 1P (Power) button to turn off power actually puts the Digital Piano into a standby state. Minute amounts of current continue to flow within the Digital Piano in the standby state. If you do not plan to use the Digital Piano for a long time or if there is a lightning storm in your area, be sure to unplug the AC adaptor from the power outlet.
· Turning off power normally causes the tone number and other settings to return to their initial defaults. You can enable Auto Resume (page EN-34), which will save most settings when power is turned off.
· If Auto Resume is disabled, turning off power will initialize settings, except for tuning (page EN-14) and touch button luminosity (page EN-34).

EN-6

Power On Alert
After about six minutes of non-operation while the Digital Piano is being powered by its AC adaptor, the Power On Alert function will cause touch button lights to turn on and off sequentially to remind you that power is on. Button lights will return to normal (all button lights lit) if you touch a button, play something on the keyboard, or perform some other operation. To turn off power, hold down the 1P (Power) button until all lit touch button lights turn off.

Overview and Setup
Using a Pedal
Connect the supplied pedal (SP-3) to the bm DAMPER PEDAL jack. Back
bm DAMPER PEDAL jack (Standard jack (6.3mm))

· You can enable or disable the power on reminder as required. See “Other Settings” (page EN-34).
· If you are using batteries to power the Digital Piano, power will turn off automatically after about six minutes of nonuse. See “Auto Power Off” (page EN-7).
Returning to Initial Factory Defaults
You can use Factory Reset (Initialization) to return the Digital Piano’s stored data and settings to their initial factory defaults any time you want. For more information, see “Factory Reset (Initialization)” (page EN-36).
Auto Power Off
This Digital Piano is designed to turn off automatically to avoid wasting power after no operation is performed for a preset amount of time. The Auto Power Off trigger time is about four hours when power is being supplied by the AC adaptor, or six minutes under battery power. · You can disable Auto Power Off to ensure that power does
not turn off automatically during a concert, etc. To disable Auto Power Off, perform the procedure below.
To enable or disable Auto Power Off
1. While holding down 3 FUNCTION, press the B}0 keyboard key.

A0 C1

C2

C3

C4

C5

C6

C7

C8

B}0

· Each press of the B}0 keyboard key sounds a notification tone and toggles Auto Power off between enabled and disabled. For more information, see “Notification Tones” (page EN-9).
2. After the setting is the way you want, release 3 FUNCTION.

SP-3

This pedal functions as a damper pedal under initial Digital Piano default settings. To change it to a different function (soft, sostenuto, etc.), see “Changing Pedal Functions” (page EN-33).
PEDAL UNIT Jack
You can connect the optionally available 3-Pedal Unit (SP-34) to the bn PEDAL UNIT jack on the back of the Digital Piano. You can then use the pedals for expression that is similar to that available on an acoustic piano.
SP-34 Pedal Functions
Damper Pedal Pressing the damper pedal while playing will cause the notes you play to reverberate. The SP-34 pedal also supports halfpedal operation, so pressing the pedal part way applies only a partial damper effect.
Soft Pedal Pressing this pedal suppresses notes played on the keyboard after the pedal was pressed, and makes them sound softer.
Sostenuto Pedal Only the notes of the keys that are depressed when this pedal is pressed are sustained, even if the keyboard keys are released, until the pedal is released.

Soft Pedal

Sostenuto Pedal

Damper Pedal

· A separately available pedal unit can be used at the same time as the supplied pedal.

EN-7

Using Headphones
Using headphones cuts off output from the built-in speakers, which means you can practice playing even late at night without disturbing others. · Be sure to turn down the volume before connecting
headphones.
bk PHONES jacks (Stereo mini jack (3.5mm))
· Headphones do not come with the Digital Piano. · Use commercially available headphones. See page EN-1
for information about options.
· Do not listen to very high volume output over headphones for long period. Doing so creates the risk of hearing damage.
· If you are using headphones that require an adaptor plug, make sure you do not leave the adaptor plugged in when you unplug the headphones. If you do, nothing will sound from the speakers when you play.
To output from the speakers while headphones are connected
Enable the “Speaker Out” setting under “Other Settings” (page EN-34) to output sound from the speakers, even if a plug is plugged into either of the PHONES jacks.

Operations Common to All Modes
· Unless otherwise specifically noted, all of the procedures in this manual assume that the Digital Piano is in its initial power on state (immediately after you turn on power). If you run into problems with a procedure, turn Digital Piano power off and back on, and then try performing the procedure again.
· Note that turning off Digital Piano power during a procedure causes any pending unsaved data to be deleted.
Touch Button Operations
Turning on Digital Piano power causes the lights of all of the front panel touch buttons to light.
· When operating a touch button, touch it firmly with a bare finger. Touch buttons will not respond if you touch them while wearing gloves.
· If a touch button does not respond, perform the steps below to increase touch button sensitivity. (1) Turn off the Digital Piano. (2) While holding down the C8 keyboard key (the one on the far right), press the 1P (Power) button. · Keep the C8 keyboard depressed until the touch buttons start to light in sequence from left to right (from 3 FUNCTION to 9 ELEC. PIANO). You do not need to keep the 1P (Power) button depressed.
Touch Button Light Auto Off (Panel Light Setting)
To save power, you can configure a setting that will turn off all button lights, except for 3 FUNCTION, after a certain period of non-operation. You can specify the amount of nonoperation time until lights turn off, or you can specify that lights should remain lit (initial default setting while the AC adaptor is connected). For information about how to configure these settings, see “To change the panel light setting” (page EN-35).
Touch Button Only Operations
Touching a button firmly and immediately releasing it will perform the operation assigned to the touch button. For example, touching 9 ELEC. PIANO selects the ELEC.PIANO tone, while touching 5 METRONOME starts (or stops) the metronome.

EN-8

Touch Button + Keyboard Key Combinations
A number of different Digital Piano settings can be configured by using a touch button (except for the 70 (REC) button) in combination with a keyboard key. As an example, the procedure shows how to select the JAZZ ORGAN tone.

A0 C1

C2

C3

C4

C5

C6

C7

C8

B1

1. Hold down 8 GRAND PIANO. · Until you release 8 GRAND PIANO in step 3 below, you can use keyboard keys to select tones and to configure other settings. For information about what operations you can perform while 8 GRAND PIANO is depressed, see the separate “Keyboard Function List”.
2. Press the B1 keyboard key. This selects the JAZZ ORGAN tone and causes the confirmation tone to sound using the JAZZ ORGAN tone.
3. Release 8 GRAND PIANO. · Now you can play on the keyboard with the JAZZ ORGAN tone.

Operations Common to All Modes

Notification Tones
When you perform a touch button and keyboard key combination operation (page EN-9), a notification tone will sound when you press the keyboard key to let you know the result of the operation. Notification tone types are described below.

Notification Tone Types

This type of tone sounds:

When this happens:

Received tone

A keyboard key operation is received and applied. This tone sounds if a setting is enabled (turned on) when you press a keyboard key that toggles the setting between enabled and disabled.

Invalid tone

You press the wrong keyboard key. This tone lets you know the operation is invalid.

Upper limit, lower limit tone

You press a keyboard key that would cause the setting to become greater than the upper limit or less than the lower limit.

Initialization tone

Settings were returned to the initial defaults. This tone sounds when you press the plus (+) and minus (­) keyboard keys at the same time, etc.

Option tone

A setting option is changed by pressing a keyboard key that cycles through options. The number of times the tone sounds depends on the option that is selected.

Off tone

A setting is disabled (turned off).

Reference tone

As you use the plus (+) and minus (­) keyboard keys to change a setting value, a reference tone will sound to signal when the keyboard key operation result in certain types of values to be set. In the case of whole number (non- fraction) values, the reference tone will sound whenever the setting becomes one that is multiple of 10 (10, 20, etc.) In the case of fraction values (like 440.2), the reference tone will sound whenever the setting becomes a value that is a whole number (440, 441, etc.)

End tone

The final keyboard key was pressed for a setting operation that requires multiple keyboard key operations. For example, when you input a three-digit tempo setting, this tone will sound when you press the keyboard key for the third digit.

Notification Tone Sets
Your Digital Piano comes with three different notification tone sets from which you can choose. You can also disable notification tones, if you want. For information about how to change the notification tone set, see “Other Settings” (page EN-34).

EN-9

Digital Piano Operations
Listening to Demo Play
1. Hold down 3 FUNCTION. This causes the DEMO light to flash, and the 4 SOUND MODE light to turn light (and the lights of other buttons to turn off).
2. Touch 4 SOUND MODE. This will cause the 6 a and DEMO lights to light, and starts playback of the one demo song (and the lights of buttons except for 6 a to turn off). After demo song playback is complete, it will continue with playback of Music Library (page EN-24) songs. · The operations below are supported during demo play.

A0 C1

C2

C3

C4

C5

C6

C7

C8

B0 B}0

C1 – B5

To do this:

Perform this operation:

Skip forward to the next song

While holding down 6 a, press the B0 keyboard key.

Skip back to the previous song

While holding down 6 a, press the B}0 keyboard key.

Jump to a specific song

While holding down 6 a, press a keyboard key from C1 through B5.*

Return to the first song (demo song)

While holding down 6 a, press the B}0 and B0
keyboard keys at the same
time.

• For information about the song number assigned to each keyboard key, see the “Music Library List” (page EN-43).

3. To stop demo song playback, touch 6 a. This causes the button lights that turned off in the above procedure to light again.

· If Auto Power Off is enabled, power will turn off automatically after the prescribed time even during demo song play. To avoid this, you can use the procedure under “To enable or disable Auto Power Off” (page EN-7) to disable Auto Power Off.

Selecting a Tone
Your Digital Piano comes with 17 tones, including three grand piano tones that are assigned to the entire keyboard range, plus one bass tone that can be assigned to lower range only. In addition to assigning a single tone to the keyboard, you can also layer two different tones and you can split the left side and right side of the keyboard between tones.
Selecting a Single Tone
To select a tone using keyboard keys
1. While holding down 8 GRAND PIANO, press a keyboard key from A0 through C{2.

A0 C1

C2

C3

C4

C5

C6

C7

C8

A0 – C{2

· For example, pressing the F{1 keyboard key will select the HARPSICHORD tone and will sound the confirmation tone using the HARPSICHORD tone.
· For information about the tone assigned to each keyboard key, see “Tone List” (page EN-42).
2. Release 8 GRAND PIANO.

To select a tone with the touch buttons
1. Touch a button as explained below to select the tone you want.

To select this tone: GRAND PIANO CONCERT ELEC.PIANO

Touch: 8 GRAND PIANO 9 ELEC. PIANO

· If tones are currently layered (page EN-11) or if the keyboard is split between two tones (page EN-12), performing the above procedure to select a tones will cancel the layer and split settings.

Grand Piano Tones
The characteristics of each of the three grand piano tones are described in the table below.

Tone name CONCERT
BRIGHT MELLOW

Description A full concert grand piano tone for dynamic and natural tone changes.
A bright and clear piano sound. A warm, subdued piano tone.

EN-10

Layering Two Tones
Layering makes it possible to sound with two different tones at the same time. The tone that is layered onto another tone is the “Upper2 part tone”, which in this manual is referred to as the “Upper2 tone”. The tone upon which the Upper2 tone is layered is the “Upper1 part tone”, which is referred to as the “Upper1 tone”.
To layer two tones
1. Use the procedure under “Selecting a Single Tone” (page EN-10) to select the Upper1 tone.
2. Select the Upper2 tone. (1) While holding down 9 ELEC. PIANO, press a keyboard key from A0 through C{2.

Digital Piano Operations
To unlayer the keyboard
You can perform either of the operations below to unlayer the keyboard. · While holding down 9 ELEC. PIANO, press the C7
keyboard key. Each press of C7 toggles layering between enabled and disabled. After the notification tone sounds (page EN-9) to confirm that layering is disabled, release 9 ELEC. PIANO. · Touch 8 GRAND PIANO or 9 ELEC. PIANO. This unlayers the keyboard and selects the tone that corresponds to the button you touched.

A0 C1

C2

C3

C4

C5

C6

C7

C8

A0 – C{2

· For example, pressing the A}1 keyboard key will select STRINGS 1 as the Upper2 tone and will sound the confirmation tone using the STRINGS 1 tone.
· For information about the tone assigned to each keyboard key, see “ELEC.PIANO Button + Keyboard Key” in the separate “Keyboard Function List”.
(2) Release 9 ELEC. PIANO.
3. Enable layering. (1) While holding down 9 ELEC. PIANO, press the C7 keyboard key.

A0 C1

C2

C3

C4

C5

C6

C7

C8

C7
· Each press of C7 toggles layering between enabled and disabled. A notification tone (page EN-9) will sound to let you know whether layering is enabled or disabled.
(2) Release 9 ELEC. PIANO. · Now when you press a keyboard key to play, the two tones (Upper1 and Upper2) you selected will sound at the same time. · To go back to playing with the Upper1 tone only, disable the layer function.

· You can adjust the volume of the Upper2 part and configure other Upper2 part settings. For more information, see “Configuring Upper2 Part and Lower Part Settings” (page EN-30).
· For information about adjusting the Upper1 part volume, see “Adjusting the Upper1 Part Volume” (page EN-29).

EN-11

Digital Piano Operations

Splitting the Keyboard Between Two Tones
You can use the lower range of the keyboard to sound a bass tone. When the keyboard is split between a left side and a right side range, the tone assigned to the lower (left side) range is the “Lower part tone”, which is referred to as the “Lower tone” in this manual. The tone assigned to the upper (right side) range is the “Upper1 part tone”, which is referred to as the “Upper1 tone”. Any one of the 17 non-bass tones can be assigned to the upper range.
Split Point

Low Range

High Range

Changing Keyboard Response to Touch Pressure (Touch Response)
Touch Response alters tone volume in accordance with keyboard pressure (speed). This provides you some of the same expressivity you get on an acoustic piano.
Pressing fast produces louder notes.

BASS

GRAND PIANO CONCERT

To use split to play bass notes in the lower range
1. Use the procedure under “Selecting a Single Tone” (page EN-10) to select the upper range (Upper1) tone.
2. While holding down 9 ELEC. PIANO, press the D2 keyboard key. This assigns the bass tone to the lower range.

A0 C1

C2

C3

C4

C5

C6

C7

C8

D2

3. Release 9 ELEC. PIANO.

· You can adjust the volume of the Lower part and configure other Lower part settings. For more information, see “Configuring Upper2 Part and Lower Part Settings” (page EN-30).
To unsplit the keyboard
You can perform either of the operations below to unsplit the keyboard. · While holding down 9 ELEC. PIANO, press a keyboard
key from A0 through C{2. This unsplits the keyboard and makes the tone assigned to the keyboard key you press become the Upper2 tone (page EN-11). · Touch 8 GRAND PIANO or 9 ELEC. PIANO. This unsplits the keyboard and selects the tone that corresponds to the button you touched.

Pressing slowly produces softer notes.
Do not try to use too much pressure.

EN-12

To change touch response sensitivity
1. While holding down 8 GRAND PIANO, press a keyboard key from F{7 through B7.

A0 C1

C2

C3

C4

C5

C6

C7

C8

F{7 – B7

· The table below shows the Touch Response sensitivity settings assigned to each keyboard key.

Pressing this key:
F{7
G7 A}7
A7 B}7
B7

Selects this setting: Off
1: Light 2: Medium
light 3: Normal 4: Medium
heavy 5: Heavy

Which does this:
Disables Touch Response. Sound volume is fixed, regardless of key press speed.
Makes production of a louder sound easier, so touch feels lighter than “Normal”.
Specifies normal sensitivity.
Makes production of a louder sound more difficult, so touch feels heavier than “Normal”.

2. Release 8 GRAND PIANO.

Digital Piano Operations
Changing the Pitch in Semitone Steps (Transpose)
Transpose lets you raise or lower the overall pitch of the Digital Piano in semitone steps. You can use this feature to raise or lower the keyboard key and to play a piece in a key that is more comfortable for you, or to adjust to a key that better matches a vocalist, etc.
To change the transpose setting
1. While holding down 8 GRAND PIANO, press the E7 or F7 keyboard key.

A0 C1

C2

C3

C4

C5

C6

C7

C8

E7

F7

Pressing this key: Does this:

E7

Lowers the pitch one semitone.

F7

Raises the pitch one semitone.

E7 + F7

Returns pitch to the initial default setting.

· You can change the pitch of the keyboard within the range of ­12 to +12 semitones.

2. After the setting is the way you want, release 8 GRAND PIANO.

EN-13

Digital Piano Operations

Fine Tuning a Pitch (Tuning)
Use the tuning feature when you need to adjust the pitch slightly to play along with another musical instrument. · The tuning feature specifies the frequency of the A4 note.
You can set a frequency within the range of 415.5 to 465.9 Hz. The initial default setting is 440.0 Hz. · You can change the frequency in 0.1 Hz steps.
To change the tuning setting
1. Hold down 3 FUNCTION. · Do not release 3 FUNCTION until step 3, below.
2. Use the keyboards keys below to adjust tuning.

A0 C1

C2

C3

C4

C5

C6

C7

C8

A4

C5

B}4

B4

Pressing this key: Does this:

A4

Sets the A4 frequency to 440.0 Hz.

B}4

Sets the A4 frequency to 442.0 Hz.

B4

Lowers the A4 frequency 0.1 Hz.*

C5

Raises the A4 frequency 0.1 Hz.*

• A reference tone (page EN-9) sounds whenever the setting values becomes an integer (whole number), such as 440, 441, etc.

3. After selecting the tuning you want, release 3 FUNCTION. · The adjusted tuning setting is retained even if you turn off power.

Changing the Pitch in Octave Units (Octave Shift)
Octave shift lets you individually raise or lower the pitches of the Upper1 part and Upper2 part in octave units.
To change the Upper1 part pitch in octave units
1. While holding down 8 GRAND PIANO, press the D7 or E}7 keyboard key.

A0 C1

C2

C3

C4

C5

C6

C7

C8

D7

E}7

Pressing this key:

Does this:

D7

Lowers the pitch of the Upper1 part

one octave.

E}7

Raises the pitch of the Upper1 part

one octave.

D7+ E}7

Returns the pitch of the Upper1 part to the initial default setting.

· You can shift the octave within the range of ­2 to +2.

2. After the setting is the way you want, release 8 GRAND PIANO.

To change the Upper2 part pitch in octave units
1. While holding down 9 ELEC. PIANO, press the E}7 or E7 keyboard key.

A0 C1

C2

C3

C4

C5

C6

C7

C8

E}7

E7

Pressing this key: Does this:

E}7

Lowers the pitch of the Upper2 part

one octave.

E7

Raises the pitch of the Upper2 part

one octave.

E}7 + E7

Returns the pitch of the Upper2 part to the initial default setting.

· You can shift the octave within the range of ­2 to +2.

2. After the setting is the way you want, release 9 ELEC. PIANO.

EN-14

Using the Sound Mode Effects (Hall Simulator and Surround)
You can use 4 SOUND MODE to enable and disable the effects described below.
Hall Simulator The hall simulator effect simulates the rich clarity, unconstrained brilliance, and other distinctive acoustic characteristics of world-famous concert halls and structures. The depth of the hall simulator effect applied to the Digital Piano’s sound source and the depth applied to externally input audio can be adjusted separately. Audio input from a Bluetooth connected smart device or an
audio device connected to the Digital Piano’s bo AUDIO IN jack.
Surround The Surround effect creates acoustics that make the sound from the speakers seem like it is coming from multiple directions (virtual surround).
· The initial power on default setting is Hall Simulator enabled and Surround disabled.
· The Surround effect is not applied to the output from the Digital Piano’s bk PHONES jacks or bp LINE OUT R, L/ MONO jacks.
To enable or disable the Hall Simulator and Surround effects
1. Touch 4 SOUND MODE. · Each touch will cycle between the settings, and the current setting is indicated by the LED lights as shown below.

Digital Piano Operations
To specify the Hall Simulator type
1. While holding down 4 SOUND MODE, press a keyboard key from A0 through C1.

A0 C1

C2

C3

C4

C5

C6

C7

C8

A0 – C1

Pressing this key:
A0
B}0

Selects this setting:
1: STANDARD HALL
2: OPERA HALL

B0

3: BERLIN HALL

C1

4: BRITISH

STADIUM

Description
Standard concert hall
Uniquely shaped Sydney Concert Hall Berlin arena type classic concert hall Large outdoor stadium in the London suburbs

2. Release 4 SOUND MODE.

Hall Simulator enabled
Surround disabled

Hall Simulator enabled
Surround enabled

Hall Simulator disabled
Surround disabled

EN-15

Digital Piano Operations
To adjust the depth of the hall simulator effect
1. Perform step 1 under “To specify the Hall Simulator type” to select a hall simulator effect.
2. While holding down 4 SOUND MODE, use the keyboard keys below to adjust hall simulator depth.

A0 C1

C2

C3

C4

C5

C6

C7

C8

C{1 – E1

Pressing this key: Does this:

C{1

Lowers the effect depth applied to the

Digital Piano sound source one level.

D1

Raises the effect depth applied to the

Digital Piano sound source one level.

C{1 + D1

Returns the effect depth applied to the Digital Piano sound source to the initial default setting.

E}1

Lowers the effect depth applied to

externally input audio* one level.

E1

Raises the effect depth applied to

externally input audio* one level.

E}1 + E1

Returns the effect depth applied to externally input audio* to the initial default setting.

• Audio input from a Bluetooth connected smart device or an audio device connected to the Digital Piano’s bo AUDIO IN jack.
  · Effect depth can be set to a value in the range of 0 (no effect) to 42 (maximum depth). As you use the keyboard keys to change the setting, the reference tone (page EN-9) will sound any time the value becomes a multiple of 10 (10, 20, etc.)
  3. After the setting is the way you want, release 4 SOUND MODE.

To specify the Surround type
1. While holding down 4 SOUND MODE, press the F1 (Surround Type 1) or F{1 (Surround Type 2) keyboard key.

A0 C1

C2

C3

C4

C5

C6

C7

C8

F1 F{1

2. Release 4 SOUND MODE.

EN-16

Digital Piano Operations

Using Chorus
Chorus is a function that adds depth and breadth to notes.
To apply a chorus effect to a tone
1. While holding down 4 SOUND MODE, press a keyboard key from G1 through B1.

Using Brilliance
Brilliance can be used to make a sound brighter or mellower.
To adjust brilliance
1. While holding down 4 SOUND MODE, press the C2 or C{2 keyboard key.

A0 C1

C2

C3

C4

C5

C6

C7

C8

G1 – B1

Pressing this key:
G1
A}1 A1 B}1 B1

Selects this setting:
Tone
1 2 3 4

Which does this:
Specifies the initial setting of each tone. Applies light chorus. Applies medium chorus. Applies deep chorus. Applies a sweeping flanger effect.

2. Release 4 SOUND MODE.

A0 C1

C2

C3

C4

C5

C6

C7

C8

C2

C{2

Pressing this key:

Does this:

C2

Lowers the brilliance setting by 1.

C{2

Raises the brilliance setting by 1.

C2 + C{2

Returns brilliance to the initial default setting.

· You can specify a setting value in the range of ­3 to +3. A setting of +1 or greater gives notes a brighter feel, while ­1 or less makes notes sound more mellow.

2. After the setting is the way you want, release 4 SOUND MODE.

EN-17

Digital Piano Operations
Adjusting Acoustic Piano Sound Characteristics (Acoustic Simulator)
The tones of your Digital Piano have built-in elements that give them the reverberation characteristics of an acoustic piano. You can use the procedure below to adjust the characteristics of notes.
To adjust acoustic piano sound characteristics
1. Hold down 4 SOUND MODE. · Do not release 4 SOUND MODE until step 3, below.
2. Use the keyboard keys shown in the table below to configure the setting item you want.

A0 C1

C2

C3

C4

C3 – F3: String Resonance F{3 – B3: Damper Resonance C4 – F4: Damper Noise

C5

C6

C7

C8

C5 – F5: Key Off Action Noise F{4 – B4: Key On Action Noise

Setting Item

Setting

Tone

Off

1

2

3

4

String Resonance

C3

C{3

D3

E}3

E3

F3

Damper Resonance

F{3

G3

A}3

A3

B}3

B3

Damper Noise

C4

C{4

D4

E}4

E4

F4

Key On Action Noise

F{4

G4

A}4

A4

B}4

B4

Key Off Action Noise

C5

C{5

D5

E}5

E5

F5

· For each setting item, press the keyboard key that corresponds to the setting you want. For example, to select the 4 setting for String Resonance, press the F3 keyboard key.
· For more information about setting items and their settings, see the “List of Acoustic Piano Sound Setting Items” (page EN-19).

3. After all the settings are the way you want, release 4 SOUND MODE.

EN-18

Digital Piano Operations

List of Acoustic Piano Sound Setting Items

Setting

Available Options

String Resonance Playing on an acoustic piano causes the strings that are harmonics of the played strings to resonate. You can select one of the string resonance settings in the column to the right.

Tone: Off: 1 to 4:

Specifies the initial setting of each tone.
Disables String Resonance.
The greater the value, the stronger the String Resonance.

Damper Resonance Pressing the damper pedal on an acoustic piano opens all 88 of the strings, causing all of the strings that are harmonics of the strings that are played to resonate. You can select one of the damper resonance settings in the column to the right.

Tone: Specifies the initial setting of each tone.
Off: Disables Damper Resonance.
1 to 4: The greater the value, the stronger the Damper Resonance.

Damper Noise Damper noise is a slight metallic ringing sound that is generated as the damper of an acoustic piano separates from the wires pedal when the damper pedal is pressed. You can use the settings in the column to the right to adjust the volume of the damper noise.

Tone: Specifies the initial setting of each tone. Off: Mutes Damper Noise. 1 to 4: The greater the value, the greater the noise volume.

Key On Action Noise

Tone: Specifies the initial setting of each tone.

When the keys of an acoustic piano are tapped with extremely light pressure, piano mechanism operation sound (noise) is produced

Off:

Mutes Key On Action Noise.

without the hammers reaching the strings. You can use the

1 to 4: The greater the value, the greater the noise volume.

settings in the column to the right to adjust the volume of the noise.

Key Off Action Noise Releasing the keyboard keys of acoustic piano generates piano mechanism operation sound (noise). You can use the settings in the column to the right to adjust the volume of the noise.

Tone: Specifies the initial setting of each tone. Off: Key Off Action Noise muted. 1 to 4: The greater the value, the greater the noise volume.

EN-19

Digital Piano Operations
Using the Metronome
The metronome sounds a regular tone to mark time. Use the metronome when you want to practice playing at a regular tempo.
To start or stop the metronome
1. Touch 5 METRONOME. This starts the metronome. · LEDs above 6 a button flash yellow (first beat) and red (remaining beats) in time with the metronome beats. · You can specify metronome tempo, beat, and volume settings. Refer to the information below. Specifying the Tempo (page EN-21) To change the metronome beat (page EN-20) To adjust the metronome volume (page EN-20)
2. To turn off the metronome, touch the 5 METRONOME again.
To change the metronome beat
1. While holding down 5 METRONOME, press a keyboard key from C2 through A2.

To adjust the metronome volume
1. While holding down 5 METRONOME, press the B}1 or B1 keyboard key.

A0 C1

C2

C3

C4

C5

C6

C7

C8

B}1

B1

Pressing this key:

Does this:

B}1

Lowers the metronome volume one level.

B1

Raises the metronome volume one level.

B}1 + B1

Returns the metronome volume to its initial default setting.

· You can adjust the metronome volume within the range of 0 (muted) and 42 (maximum). As you use the B}1 and B1 keyboard keys to change the setting, the reference tone (page EN-9) will sound any time the value becomes a multiple of 10 (10, 20, etc.)

2. Release 5 METRONOME.

A0 C1

C2

C3

C4

C5

C6

C7

C8

C2 – A2

· The beat setting changes in accordance with the keyboard key you press, as shown in the table below.

Pressing this key:
C2 C{2 D2 E}2 E2 F2 F{2 G2 A}2 A2

Selects this setting:
Off 1 2 3 4 5 6 7 8 9

Which does this:
Sounds a click for all beats. Sounds a bell for all beats.
These keys specify a beat setting of 2 to 9. The first beat of each measure is a bell sound, while the remaining beats are clicks.

2. Release 5 METRONOME.

EN-20

Digital Piano Operations

Specifying the Tempo
When using the metronome (page EN-20) or when playing back a Music Library (page EN-24) song, you can specify a tempo setting within the range of 20 to 255 beats per minute. Use the keyboard keys below to specify the tempo setting value.

A0 C1

C2

C3

C4

C5

C6

C7

C8

To raise or lower the tempo setting value by one
1. While holding down 5 METRONOME, press the A0 or B}0 keyboard key as required. · Each press of the A0 keyboard key will raise the setting value by 1, while B}0 lowers it by 1. · You can also use the keyboard keys from B0 to A}1 to input a tempo value.
2. Release 5 METRONOME.

A0 B}0 B0 C1 C{1 D1 E}1 E1 F1 F{1 G1 A}1

0

2

4

1

3

5

7

9

6

8

· You can also configure the setting of the pedal connected to the bm DAMPER PEDAL jack so pressing the pedal multiple times will cause the tempo value to change to match the speed of the pedal presses. See “Changing Pedal Functions” (page EN-33).

To input a tempo setting value
1. Hold down 5 METRONOME. · Do not release 5 METRONOME until step 3, below.
2. Use keyboard keys from B0 to A}1 to input a tempo setting value. · Input three digits for the tempo value. To specify a value that has fewer than three digits, input zero (0) for the unused leading digit. For example, to specify a tempo of 80 bpm, press keyboard keys in the following sequence: B0 (0) 3 G1 (8) 3 B0 (0). The end tone (page EN-9) will sound when you input the third digit. · Here, you could use the A0 or B}0 keyboard key to raise or lower the tempo by 1 with each press. · Pressing the A0 and B}0 keyboard keys at the same time will return the tempo setting to the initial default value for the currently selected Music Library song (page EN-24).
3. After the setting is the way you want, release 5 METRONOME.

EN-21

Digital Piano Operations

Splitting the Keyboard for Duet Play
You can split the keyboard in the center for duet play so the left and right sides have the same ranges. The Duet Mode is the perfect way to conduct lessons, with the teacher playing on the left side as the student plays the same song on the right side.

Split point

Left keyboard

Right keyboard

C3

C4

C5

C6

C3

C4

C5

C6

(middle C)

(middle C)

· You can change the ranges of the left and right keyboards in octave units from their initial default settings. This comes in handy, for example, if the initial default range is not enough when one person is playing the left hand part and another person is playing the right hand part. For information about the setting operation, see “To change the octaves of the duet keyboards” (page EN-23).
Pedal Operation when Playing a Duet
· If you are using the separately available SP-34 Pedal Unit, the left outer pedal is the left keyboard damper pedal, while the right outer pedal is the right keyboard damper pedal. Only the damper pedal for the right keyboard supports halfpedal operations.

To use the Duet Mode
1. While holding down 3 FUNCTION, press the C4 keyboard key.

A0 C1

C2

C3

C4

C5

C6

C7

C8

C4

Each time the C4 keyboard key is pressed to change this setting, a notification tone sounds to indicate the newly selected setting.

Notification Tone* Off tone
Option tone × 1
Option tone × 2

Setting

Description

Off Duet Mode exited.
On Duet Mode entered.
Pan Left-side keyboard notes output from the left speaker, right-side keyboard notes output from the right speaker while in the Duet Mode.

• For more information, see “Notification Tones” (page EN-9).
  2. After the setting is the way you want, release 3 FUNCTION.

· Some settings become fixed and cannot be changed while in the Duet Mode.
· Hall Simulator (page EN-15), Surround (page EN-15) and Chorus (page EN-17) are disabled while the Duet Mode setting is “Pan”.

Left side damper pedal

Left and right side damper pedal

Right side damper pedal (Half-pedal operation supported)

· To use the supplied SP-3 Pedal as a damper pedal that affects both the left keyboard and right keyboard, connect it to the bm DAMPER PEDAL jack. In the Duet Mode, this pedal functions as a damper pedal, regardless of the effect type assigned to it with the procedure under “Changing Pedal Functions” (page EN-33). Half-pedal operation is not supported in this case.

EN-22

To change the octaves of the duet keyboards
1. Hold down 3 FUNCTION. · Do not release 3 FUNCTION until step 3, below.
2. Use the keyboard keys below to change the octaves of the left-side and right-side keyboards.

A0 C1

C2

C3

C4

C5

C6

C7

C8

C{4 – E4

Pressing this key:

Does this:

C{4

Lowers the left-side keyboard one octave.

D4

Raises the left-side keyboard one octave.

C{4 + D4 Returns the range of the left-side keyboard to its initial default setting.

E}4

Lowers the right-side keyboard one octave.

E4

Raises the right-side keyboard one octave.

E}4 + E4 Returns the range of the right-side keyboard to its initial default setting.

· You can shift the octave of each keyboard within the range of ­2 to +2 octaves.

Setting Example Pressing the D4 keyboard key once will configure the keyboard octaves as shown below.

Left keyboard

Right keyboard

C4

C5

C6

C7

C3

C4

C5

C6

1 octave higher than initial setting

Unchanged

3. When the octave settings of the keyboards are the way you want, release 3 FUNCTION.

Digital Piano Operations
Changing the Scale Tuning (Temperament) of the Keyboard
You can change the scale of the keyboard from the standard equal temperament to another tuning that is more suitable for playing Indian music, Arabic music, classical music, etc. You can select from among the 17 preset scales described below.
To change the scale
1. While holding down 3 FUNCTION, press a keyboard key from G1 through B2.

A0 C1

C2

C3

C4

C5

C6

C7

C8

G1 A}1 A1 B}1 B1 C2 C{2 D2 E}2 E2 F2 F{2 G2 A}2 A2 B}2 B2

13 0 24

68 5 79

11 13 15 10 12 14 16

· Pressing a keyboard key changes to the applicable scale as shown in the table below.

Key Setting Value

Scale Name

G1

0

Equal Temperament

A}1

1

Pure Major

A1

2

Pure Minor

B}1

3

Pythagorean

B1

4

Kirnberger 3

C2

5

Werckmeister

C{2

6

Mean-Tone

D2

7

Rast

E}2

8

Bayati

E2

9

Hijaz

F2

10

Saba

F{2

11

Dashti

G2

12

Chahargah

A}2

13

Segah

A2

14

Gurjari Todi

B}2

15

Chandrakauns

B2

16

Charukeshi

2. Release 3 FUNCTION.

EN-23

Digital Piano Operations
To specify the base note of the scale
1. While holding down 3 FUNCTION, press a keyboard key from C3 through B3.

A0 C1

C2

C3

C4

C5

C6

C7

C8

C3 – B3

· The note of the keyboard key you press becomes the base note.
2. Release 3 FUNCTION.

Listening to Songs (Music Library)
You can use the Music library for your listening enjoyment or to practice piano songs. · The Music Library includes 60 songs, numbered 1 through
60. · You can also transfer songs (user songs) from a smart
device to the Digital Piano and save them as Music Library songs 61 through 70. User songs can also be used for playback and practice.
· Adding and deleting user songs can be performed only from a smart device connected to the Digital Piano. For more information, see “Linking with a Smart Device (APP Function)” (page EN-37).
To listen to Music Library songs
1. Select the song you want. (1) While holding down 6 a, press one of the keyboard keys below.

A0 C1

C2

C3

C4

C5

C6

C7

C8

B0 B}0

C1 – B5

C6 – A6

Pressing this key:

Does this:

C1 to B5

Selects the built-in song (Song numbers 1 to 60) that corresponds to the pressed keyboard key.

C6 to A6

Selects the user song (Song numbers 61 to 70) that corresponds to the pressed keyboard key.

B0

Selects the next song number.

B}0

Selects the previous song number.

· For information about the song number assigned to each keyboard key, see “a Button +
Keyboard Key” in the separate “Keyboard
Function List”. For a list of songs, see the “Music
Library List” (page EN-43). (2) Release 6 a.

EN-24

2. To start song playback, touch 6 a. · LEDs above the 6 a button flash yellow (first beat) and red (remaining beats) in time with the metronome beats. · Playback will stop automatically when the end of the song is reached. To stop song playback, touch 6 a.
· Selecting a song in step 1 of the above procedure will automatically configure Digital Piano with settings that are appropriate for the selected song, and return the playback part (page EN-25) settings to their initial defaults.
To use a Music Library song for practice
· You can turn off the left-hand part or right-hand part of a built-in song and play along on the keyboard.
1. Perform step 1 under “To listen to Music Library songs” (page EN-24) to select the song you want to practice.
2. As required, perform the procedure under “Specifying the Tempo” (page EN-21) to specify the tempo of the song. · With some songs, the tempo will change part way through for the sake of performance expression.
3. Select the playback part (left-hand or righthand part). (1) While holding down 6 a, press keyboard key A0 (leftmost white key). Each press of the A0 keyboard key cycles through the settings shown below. L only lit: Left-hand part played, right-hand part muted. R only lit: Right-hand part played, left- hand part muted. LR both lit: Both left- and right-hand parts played. (2) Release 6 a.
4. To start song playback, touch 6 a. · Play the muted part along with the playback. · You can also change the tempo setting during playback. · Playback will stop automatically when the end of the song is reached. To stop song playback, touch 6 a.

Digital Piano Operations EN-25

Digital Piano Operations
Recording and Playing Back Performances (MIDI Recorder)
Your Digital Piano can record what you play on the keyboard and play it back when you want.

· CASIO COMPUTER CO., LTD. takes no responsibility for any damages, lost profits, or claims by third parties arising from the deletion of recorded data due to malfunction, repair, or for any other reason.
How the Digital Piano records your performances (MIDI Recorder)
Your Digital Piano uses a MIDI recorder (not an audio recorder) to record your performances. It records keyboard performance information (keyboard key press and release, touch pressure, etc.) as MIDI data.* · One recorded song can be in memory at a time. Starting a new recording deletes any data that was previously recorded in
memory. · The left track and right track can be recorded individually and combined into a single song.

Left-hand part track Keyboard performance recording Right-hand part track

While playing back Keyboard performance recording

Played back simultaneously

· Up to approximately 10,000 notes (total of two tracks) can be recorded for a single song.

• MIDI MIDI is short for “Musical Instrument Digital Interface”. It is a universal standard that makes it possible for musical instruments, computers, and other devices to exchange performance information (keyboard key press/release, touch pressure, etc.) regardless of manufacturer. Performance data in this case is called “MIDI data”.

· MIDI data stored in Digital Piano memory cannot be saved to a USB flash drive, a computer, or any other external device.
Recorded MIDI Data
Recording with the MIDI recorder also records the operations and settings below in Digital Piano memory. · Keyboard play and pedal operations · Tone · Tempo · Beat · Layer setting (Left-hand part track only) · Split setting (Left-hand part track only) · Duet (Left-hand part track only) · Sound Mode (Hall Simulator type, Hall Simulator depth applied to the Digital Piano sound source, and Surround type), Chorus,
Brilliance · Acoustic simulator setting · Scale Common for both tracks. Settings configured for the left-hand part track are also applied to the right-hand part track.

EN-26

Creating a Recording
· If, during a recording operation, the number of remaining recordable notes is 100 or fewer, the indicator of the track being recorded (L or R) will start to flash more quickly. Recording stops automatically when the number of remaining recordable notes becomes 0.
· Should power fail during recording, all of the data in the track you are recording will be deleted.
· You cannot use keyboard operations to configure settings while in record standby or while recording is in progress.
Quick Guide: Simplest performance recording operation
1. While the 70 (REC) button is lit white, touch 70 (REC). This enters record standby, which is indicated by flashing 70 (REC) (red) and 6 a (white) lights.
2. To start recording, play something on the keyboard. This causes the 70 (REC) (red) light to change from flashing to lit, which indicates that recording is in progress.
3. When you are finished recording, touch 70 (REC) or 6 a. This makes 70 (REC) light white again.
4. To replay the recording, touch 6 a.
· The above operation records what is played on the keyboard to the left-hand part track. For further operation details, see “To record the left-hand part track” (page EN-27).

Digital Piano Operations
To record the left-hand part track
1. Depending on the track to be recorded, configure the applicable settings. · See “Recorded MIDI Data” (page EN-26). · If you want to specify a beat and tempo setting, refer to the information below and configure the settings. “To change the metronome beat” (page EN-20) “Specifying the Tempo” (page EN-21)
2. While the 70 (REC) button is lit white, touch 70 (REC). This enters record standby, which is indicated by flashing 70 (REC) (red) and 6 a (white) lights. · At this time, the “L” indicator starts to flash. This indicates that the left-hand part track will be recorded. · To exit a recording operation here, touch 70 (REC). This makes 70 (REC) light white again.
3. If you want the metronome to sound during recording, touch 5 METRONOME.
4. To start recording, play something on the keyboard, press the pedal or touch 6 a. This causes the 70 (REC) light (red) to change from flashing to lit.
5. When you are finished recording, touch 70 (REC) or 6 a. This makes 70 (REC) light white again.
6. To replay the recording, touch 6 a.
Restarting Recording From the Beginning · If you make a mistake and want to stop an ongoing
recording operation and restart recording from the beginning, hold down 70 (REC) until its light flashes. This discards everything you have recorded to the left-hand track and returns to record standby. Perform the operation from step 4 of the above procedure to restart recording.

EN-27

Digital Piano Operations
To overdub a left-hand part track recording with right-hand part track recording
1. Perform steps 1 and 2 under “To record the left-hand part track” (page EN-27).
2. Press 70 (REC) as many times as necessary until the “R” and “L” indicators are as described below. · “R” indicator flashing. This indicates that the right-hand part track will be recorded. · The “L” indicator stops flashing. This indicates that the left-hand part track recording is complete.
3. As required, specify whether or not you want to play back the left-hand track while recording. (1) While holding down 6 a, press keyboard key A0 (leftmost white key). Each press of the A0 keyboard key toggles the “L” indicator between lit and unlit. L lit: Left-hand part track playback during recording. L unlit: No left-hand part track playback during recording. (2) Release 6 a.
4. If you want the metronome to sound during recording, touch 5 METRONOME.
5. To start recording, play something on the keyboard, press the pedal or touch 6 a. This causes the 70 (REC) light (red) to change from flashing to lit. · The settings configured for the left-hand part track are applied for the beat and tempo.
6. Perform the procedure starting from step 5 under “To record the left-hand part track” (page EN-27).
Restarting Overdubbing From the Beginning · If you make a mistake and want to stop an ongoing
overdubbing operation and restart overdubbing from the beginning, hold down 70 (REC) until its light flashes. This discards everything you have recorded to the righthand track and returns to record standby. Perform the operation from step 5 of the above procedure to restart overdubbing.

To delete everything recorded to a track
1. While the 70 (REC) button is lit white, touch 70 (REC). This enters record standby, which is indicated by flashing 70 (REC) (red) and 6 a (white) lights. · At this time, the “L” indicator is flashing. If you want to delete the contents of the left-hand part track, advance directly to step 3.
2. If you want to delete the contents of the righthand part track, hold down 70 (REC) until the “R” indicator starts to flash.
3. Touch 6 a. This causes the 70 (REC) light (red) to change from flashing to lit.
4. Hold down 70 (REC) until its light flashes. This deletes the contents of the specified track.
5. Touch 70 (REC) to exit record standby.
Playing Back Recorded Content
Immediately after finishing a recording, touching 6 a will play it back. Use the procedure below to play back a recording if you played a Music Library song or turned off Digital Piano power after recording it.
To perform playback
1. While holding down 6 a, press the C7 keyboard key.

A0 C1

C2

C3

C4

C5

C6

C7

C8

C7

2. Release 6 a.
3. To start playback, touch 6 a. · Playback will stop automatically when the end of the recording is reached. To stop playback manually, touch 6 a.

EN-28

Configuring Settings
Adjusting the Upper1 Part Volume
To adjust the Upper1 part volume, hold down 8 GRAND PIANO as you press the keyboard keys shown below.

A0 C1

C2

C3

C4

C5

C6

C7

C8

C7

C{7

Pressing this key:

Does this:

C7

Lowers the Upper1 part volume by 1.*1

C{7

Raises the Upper1 part volume by 1.*1

C7 + C{7

Returns the volume of the Upper1 part to the initial default setting.

*1 You can set the volume within the range of 0 to 42. The reference tone (page EN-9) will sound any time the setting value becomes a multiple of 10 (10, 20, etc.)

EN-29

Configuring Settings
Configuring Upper2 Part and Lower Part Settings
You can configure separate Upper2 and Lower (bass) part settings for the following items: volume, pitch, damper pedal effect enable/disable. To configure these settings, hold down 9 ELEC. PIANO as you press the keyboard keys shown below.

A0 C1

C2

C3

C4

C5

C6

C7

C8

C{7: Upper2 Volume (­)
D7: Upper2 Volume (+) F7: Upper2 Detune (­) F{7: Upper2 Detune (+)
G7: Upper2 Damper A}7: Lower Volume (­) A7: Lower Volume (+) B}7: Lower Detune (­)
B7: Lower Detune (+) C8: Lower Damper

Setting
Upper2 Volume Adjusts the volume of the Upper2 part.

Pressing this key:
C{7
D7

Does this:
Lowers the Upper2 part volume by 1.12 Raises the Upper2 part volume by 1.12

C{7 + D7 Returns the volume of the Upper2 part to the initial default setting.

Upper2 Detune Raises or lowers the pitch of the Upper2 part, relative to the Upper1 part, within the range of ±99 cents

F7 F{7 F7 + F{7

Lowers the pitch of the Upper2 part one cent.2 Raises the pitch of the Upper2 part one cent.2
Makes the pitch of the Upper2 part identical to the pitch of the Upper1 part (default).

Upper2 Damper Toggles application of the damper pedal effect to the Upper2 part between enabled and disabled.

G7

Toggles between enabled and disabled.

Lower Volume Specifies the Lower part volume.

A}7 Lowers the Lower part volume by 1.12

A7

Raises the Lower part volume by 1.12

A}7 + A7 Returns the Lower part volume to the initial default setting.

Lower Detune Raises or lowers the pitch of the Lower part, relative to the Upper1 part, within the range of ±99 cents.

B}7 B7 B}7 + B7

Lowers the pitch of the Lower part one cent.2 Raises the pitch of the Lower part one cent.2
Makes the pitch of the Lower part identical to the pitch of the Upper1 part (default).

Lower Damper Toggles application of the damper pedal effect to the Lower part between enabled and disabled.

C8

Toggles between enabled and disabled.

1 You can set the volume within the range of 0 to 42. 2 The reference tone (page EN-9) will sound any time the setting value becomes a multiple of 10 (10, 20, etc.)

EN-30

Configuring Settings
Adjusting the Volume Balance
You can use the keyboard keys in this section to adjust the volumes of keyboard play, song playback, and externally input audio. To adjust, hold down 3 FUNCTION as you press the keyboard keys shown below.

A0 C1

C2

C3

C4

C5

D5: Keyboard Volume (­) E}5: Keyboard Volume (+)

C6

C7

C8

G5: Audio Volume (+) F{5: Audio Volume (­) F5: Song Volume (+) E5: Song Volume (­)

Setting

Pressing this key:

Does this:

Keyboard Volume The overall volume of keyboard play can be adjusted within the range of 0 (muted) to 42 (maximum).

D5 E}5 D5 + E}5

Lowers the keyboard volume by 1.1 Raises the keyboard volume by 1.1 Returns the keyboard volume to its initial default setting.

Song Volume The overall volume of song (built-in songs, user songs, MIDI recorder songs) playback can be adjusted within the range of 0 (muted) to 42 (maximum).

E5 F5 E5 + F5

Lowers the song volume by 1.1 Raises the song volume by 1.1 Returns the song volume to its initial default setting.

Audio Volume The overall volume of externally input audio*2 can be
adjusted within the range of 0 (muted) to 42 (maximum).

F{5 G5 F{5 + G5

Lowers the audio volume by 1.1 Raises the audio volume by 1.1 Returns the audio volume to its initial default setting.

1 The reference tone (page EN-9) will sound any time the setting value becomes a multiple of 10 (10, 20, etc.) 2 Audio input from a Bluetooth connected smart device or an audio device connected to the Digital Piano’s bo AUDIO IN jack.

Audio-In Center Cancel
Enabling Audio-In Center Cancel cuts the vocal part from the audio being input using Bluetooth or the Digital Piano’s bo AUDIO IN jack. Note that this function cancels the sound in the center position of the audio, which may (depending on how the original audio was mixed) end up canceling something else other than the vocal part. How vocal cut is performed depends on the sound being input.
To change Audio-In Center Cancel setting, hold down 3 FUNCTION as you press the keyboard key shown below. Each press toggles between enabled and disabled.

A0 C1

C2

C3

C4

C5

C6

C7

C8

A}5: Audio-In Center Cancel

EN-31

Configuring Settings
Configuring MIDI Settings
To change MIDI settings, hold down 3 FUNCTION as you press the keyboard keys shown below.

A0 C1

C2

C3

C4

C5

C6

C7

C8

C6: Local Control C{6: Keyboard Channel (­)
D6: Keyboard Channel (+) E}6: Hi-Res Vel MIDI OUT

Setting
Local Control When this setting is turned off, performance information (MIDI data) is sent from the Digital Piano, but no Digital Piano sound is output. This setting is for when you only want to send MIDI data to an external device. Keyboard Channel This setting specifies a channel from 1 through 16 as the MIDI channel that can be used for sending data to an external device.
Hi-Reso Velocity MIDI Out This setting enables/disables high-resolution MIDI output of touch pressure (velocity) when keyboard keys are pressed.

Pressing this key:
C6
C{6 D6 C{6 + D6
E}6

Does this: Toggles between on and off.
Lowers the Keyboard Channel by 1. Raises the Keyboard Channel by 1. Returns the Keyboard Channel to its initial default setting (1). Toggles between enabled and disabled.

EN-32

Configuring Settings
Changing Pedal Functions
A pedal connected to the Digital Piano’s bm DAMPER PEDAL jack functions as a damper pedal under initial Digital Piano default settings. You can use the procedure below to change the pedal to another function.
To change the function of the pedal connected to the DAMPER PEDAL jack.
1. Hold down 3 FUNCTION. · Do not release 3 FUNCTION until step 3, below.
2. Press the E6 keyboard key.

A0 C1

C2

C3

C4

C5

C6

C7

C8

E6

Each time the E6 keyboard key is pressed to change this setting, a notification tone sounds to indicate the newly selected setting.

Notification Tone Count

With this setting:

The pedal does this:

1

Damper

Sustains notes played while the pedal is depressed, even if the keyboard key is subsequently

released. Organ and other tones that are sustained as long as keyboard key are depressed

continue to sound as long as the pedal is depressed.

2

Sostenuto

Only the notes of the keys that are depressed when the pedal is pressed are sustained, even

if the keyboard keys are released, until the pedal is released.

3

Soft

Slightly lowers and softens notes played while the pedal is depressed.

4

Metronome Starts and stops the metronome.

5

Tempo setting Pressing the pedal multiple times will cause the tempo value to change to match the timing of

the pedal presses.

3. After the setting is the way you want, release 3 FUNCTION.

EN-33

Configuring Settings
Other Settings
To change settings shown in the table below, hold down 3 FUNCTION as you press the indicated keyboard keys.

A0 C1

C2

C3

C4

C5

C6

C7

C8

D7: Touch Button Luminosity E}7: Touch Button Sensitivity (­)
E7: Touch Button Sensitivity (+) F7: Speaker Out
F{7: Power On Alert G7: Panel Light Setting
A}7: Auto Resume A7: Notification Tone Volume (­) B}7: Notification Tone Volume (+) B7: Notification Tone Set Selection
C8: Panel Lock

Setting
Touch Button Luminosity Toggles the touch button luminosity setting between 1 (dim) and 2 (bright).
Touch Button Sensitivity Specifies touch button sensitivity within the range of ­1 (Low) to 0 (Standard) to +1 (High).
Speaker Out Controls whether or not sound is output from the speakers when something is plugged into either of the bk PHONES jacks. Sound is not output when this setting is disabled (default), and output when it is enabled.
Power On Alert Enables or disables Power On Alert (page EN-7).
Panel Light Setting To save power, you can configure a setting that will turn off all button lights, except for 3 FUNCTION, after a certain period of nonoperation. You can specify a trigger time of 5, 30, 60, or 120 seconds. You can also disable this setting, which means that lights will remain on.
Auto Resume Enabling Auto Resume causes most settings to be saved while power is turned off.*1
Notification Tone Volume The notification tone volume can be adjusted within the range of 0 (muted) to 10 (maximum).
Notification Tone Set Selection Your Digital Piano lets you know the results of operations by sounding notification tones. You can select from among three different notification tone sets.

Pressing this key:
D7
E}7 E7 F7
F{7 G7
A}7
A7 B}7 A7 + B}7 B7

Does this: Toggles the setting between 1 and 2.
Lowers the touch button sensitivity setting by 1. Raises the touch button sensitivity setting by 1. Toggles between enabled and disabled.
Toggles between enabled and disabled. See “To change the panel light setting” (page EN-35).
Toggles between enabled and disabled.
Lowers the notification tone volume by 1. Raises the notification tone volume by 1. Returns the notification tone volume to its initial default setting. Cycles the setting to the next notification tone set (1, 2, 3).

EN-34

Configuring Settings

Setting

Pressing this key:

Panel Lock

C8

While this setting is enabled, the lights of all touch buttons, except

3 FUNCTION, are turned off, and all operations are disabled, except

for those below.

· 1P (Power) button power operations. Turning off Digital Piano

power cancels panel lock.

· Touch button operation to cancel Panel Lock.

*1 The settings below are not retained even if Auto Resume is enabled. Duet Mode setting, song playback part setting, Local Control, Panel Lock

Does this:
Toggles between enabled and disabled. To cancel Panel Lock, hold down 3 FUNCTION as you press the C8 keyboard key.

To change the panel light setting

1. Hold down 3 FUNCTION. · Do not release 3 FUNCTION until step 3, below.
2. Press the G7 keyboard key. Each time the G7 keyboard key is pressed to change this setting, a notification tone sounds to indicate the newly selected setting.

Notification Tone* Off tone
Option tone × 1 Option tone × 2 Option tone × 3

Setting Off
5 seconds 30 seconds 60 seconds

Description
Touch button lights remain lit.
After non-operation of the front panel for the specified time, the lights of all touch buttons, except for 3 FUNCTION, will turn off.

Option tone × 4

120 seconds

• For more information, see “Notification Tones” (page EN-9).
  3. After the setting is the way you want, release 3 FUNCTION.

· Turning on the Digital Piano under battery power only (without AC adaptor power) will cause the Panel Light Setting to change automatically to 60 seconds to conserve power. You can change the Panel Light Setting if you want.

EN-35

Configuring Settings
Factory Reset (Initialization)
You can use the procedure below to return the Digital Piano’s stored data and settings to their initial factory defaults any time you want.

A0 C1

C2

C3

C4

C5

C6

C7

C8

A0

C1

1. Hold down 3 FUNCTION. 2. Press the A0 keyboard key.
This enters factory reset standby and causes the 3 FUNCTION light to flash. · Step 3 below will execute the initialization operation. If you want to cancel initialization at this point, release
3 FUNCTION.
3. To execute initialization, press the C1 keyboard key. This starts initialization.
4. Release 3 FUNCTION. · The initialization operations takes some time to complete. Wait until initialization is complete. All front panel touch button lights (3 FUNCTION to 9 ELEC. PIANO) light when initialization is complete.

EN-36

Linking with a Smart Device (APP Function)
You can use the APP Function to connect the Digital Piano with a phone, tablet or other smart device and perform the operations described below. · Control the Digital Piano from a smart device (Piano Remote Controller) · Transfer music data from a smart device · Put the mobile device you will connect with into its Airplane Mode or otherwise disable device communications. · When connecting a smart device to the Digital Piano, do not connect both a USB cable and an audio cable at the same
time.
To download the smart device app
Download the Chordana Play for Piano app from the CASIO website and install it on the smart device. https://support.casio.com/global/en/emi/manual/PX-S1000/
To link to a smart device
1. Referring to “To download the smart device app” (page EN-37), install the app on the smart device. 2. Use a commercially available USB cable to connect the smart device USB port to the Digital Piano
bl USB port.
· After connecting the smart device to the Digital Piano, use the smart device app to perform operations. For details about operations, refer to the user documentation of the app.
EN-37

Troubleshooting
Nothing happens when I touch a touch button.
Cause: a. Wearing glove or touching with a fingernail or stylus. b. Incorrect touch button sensitivity setting.
Action: a. When operating a touch button, touch it firmly with a bare finger. b. Perform the steps below to increase touch button sensitivity. (1) Turn off the Digital Piano. (2) While holding down the C8 keyboard key (the one on the far right), press the 1P (Power) button. · Keep the C8 keyboard depressed until the touch buttons start to light in sequence from left to right (from 3 FUNCTION to 9 ELEC. PIANO). You do not need to keep the 1P (Power) button depressed.
No sound is produced when I press a keyboard key.
Cause: a. The 2 volume knob setting is too low. b. Headphones or an adaptor plug is plugged into one of the bk PHONES jacks. c. MIDI Local control is turned off.
Action: a. Rotate the 2 volume knob. b. Disconnect whatever is connected to the bk PHONES jacks. c. Turn on the Local control setting (page EN-32).
The Digital Piano emits a loud sound and suddenly turns off.
Action: Replace the batteries with new ones or switch over to AC adaptor power (page EN-5).
The pitch of the Digital Piano is off.
Cause: a. The current transpose setting of the keyboard is something other than the default setting. b. The Digital Piano’s tuning setting is something other than “440.0Hz”. c. Octave shift is enabled. d. The current scale setting is something other than “Equal Temperament”.
Action: a. Return transpose (page EN-13) to its initial default setting. b. Change the tuning setting to “440.0Hz” (page EN-14), and return Upper2 Detune and Lower Detune (page EN-30) to their default settings. c. Change the octave shift setting to 0 (page EN-14). d. Change the scale setting to “Equal Temperament”.

Nothing happens when I press a pedal.
Cause: The pedal cord is not connected correctly to the bm DAMPER PEDAL jack or bn PEDAL UNIT jack, or the plug is not plugged in completely.
Action: Confirm that the pedal cord is connected correctly, and that the plug is inserted as far as it will go.
Tones and/or effects sound strange. Note intensity does not change even though I alter key pressure. Turning power off and then back on again does not eliminate the problem.
Cause: Auto Resume is enabled.
Action: Disable Auto Resume (page EN-34) and turn off power.
I cannot transfer data after connecting the Digital Piano to a computer.
Action: a. Check to make sure that the USB cable is connected to the Digital Piano and computer, and that the correct device is selected with your computer’s music software. b. Turn off the Digital Piano and then exit the music software on your computer. Next, turn the Digital Piano back on and then restart the music software on your computer.
A tone’s quality and volume sounds slightly different depending where it is played on the keyboard.
Cause: This is an unavoidable result of the digital sampling process, and does not indicate malfunction. Multiple digital samples are taken for the low range, middle range, and high range of the original musical instrument. Because of this, there may be very slight differences in tonal quality and volume between sample ranges.

EN-38

Touching a button causes the note that is sounding cuts out momentarily or a slight change in how effects are applied.
Cause: This happens when the sounds of multiple parts are sounding at the same time while using layer, using the Duet Mode, playing back a built-in song, recording, etc. Pressing a button when one of these conditions exists will cause the effect setting that is built into the tone to change automatically, which causes notes to cut out momentarily or causes a slight change in how effects are being applied.
How do I delete a user song?
Action: Adding and deleting user songs can be performed only from a smart device connected to the Digital Piano. For more information, see “Linking with a Smart Device (APP Function)” (page EN-37).

Troubleshooting

EN-39

Reference

Product Specifications

Model

PX-S1000BK/PX-S1000WE

Keyboard

88-key piano keyboard

Duet

Adjustable tone range (­2 to +2 octaves)

Transpose

­12 to 0 to +12 semitones

Octave shift

­2 to 0 to +2 octaves

Sound Source

Number of Tones

18 (17 full-keyboard tones + 1 low-range bass tone) · Layer (excluding bass tone) · Split (bass tone only in low range)

Maximum polyphony

192 notes

Touch Response

5 sensitivity levels, Off

Tuning

415.5Hz to 440.0Hz to 465.9Hz (0.1Hz units)

Temperament

Equal temperaments plus 16 other types

Acoustic Simulator

Hammer response, Key off response, String resonance, Damper resonance, Damper noise, Key on action noise, Key off action noise

Digital Effect

Sound Mode

Hall simulator (4 types), Surround (2 types)

Other Effects

Chorus (4 types), DSP (Preset for some tones), Brilliance (­3 to 0 to +3)

Demo Song

1

Music Library

Built-in Songs

60

User Songs

10 (Up to approximately 90KB per song, approximately 900KB for 10 songs) Based on 1KB = 1024 bytes, 1MB = 10242 bytes

Song volume

Adjustable (Setting also affects MIDI recorder song playback.)

Part On/Off

L, R

MIDI Recorder

Functions

Real-time recording, playback

Number of Song

1

Number of Tracks

2

Capacity

Approximately 10,000 notes total

Recorded Data Protection

Built-in flash memory

MIDI recorder volume

Adjustable (Setting also affects Music Library song playback.)

Metronome

Beat bell

Off, 1 to 9 (beats)

Tempo Range

20 to 255

Metronome Volume Level

Adjustable

Pedals

Included SP-3 pedal assignable functions Damper (off, on), sostenuto (off, on), soft (off, on), metronome (start, stop), tempo setting

Separately available SP-34 pedal unit Damper (off, half, on), sostenuto (off, on), soft (off, on)

Other Functions

· Auto Resume · Panel Lock · Notification tones (Selectable sets 1, 2, 3; Adjustable volume)

Bluetooth Connection

Bluetooth Version

5.0

Supported Profile

A2DP

Supported Codecs

SBC

Wireless Output

Bluetooth Class 2

Transmission Frequency Range

2402 to 2480 MHz

Maximum Wireless Output

4 dBm

MIDI

16-channel multi-timbre receive

EN-40

Reference

Inputs/Outputs PHONES jacks Power AUDIO IN jack
LINE OUT R, L/MONO jacks
USB port DAMPER PEDAL jack PEDAL UNIT jack Acoustics Amp output Speakers Power Supply Batteries Continuous Operation
AC Adaptor Auto Power Off
Power Consumption Dimensions Weight

Stereo mini jacks (3.5mm) × 2 12V DC Stereo mini jack (3.5mm) Input impedance: 10k Input voltage: 200mV Standard jacks (6.3mm) × 2 Output impedance: 2.3k Output voltage: 1.3V (RMS) MAX Type B Standard jack (6.3mm) Proprietary jack
8W + 8W 16cm × 8cm (oval) × 2 2-way 6 AA-size alkaline batteries Playback of built-in demo songs for approximately 4 hours on alkaline batteries Volume set at 50%. At maximum volume, low battery will be indicated (all touch
buttons, except for 3 FUNCTION flashing) after about two hours. AD-A12150LW Approximately four hours (under AC adaptor power) or six minutes (under battery power) after last operation; Can be disabled. 12V=10W 132.2 (W) × 23.2 (D) × 10.2 (H) cm (52 1/16 × 9 1/8 × 4 inch) Approximately 11.2kg (24.7 lbs) (without batteries)

· Specifications and designs are subject to change without notice.

EN-41

Reference

Tone List
Tone Name GRAND PIANO CONCERT GRAND PIANO BRIGHT GRAND PIANO MELLOW ROCK PIANO JAZZ PIANO ELEC.PIANO DIGITAL E.PIANO 1 DIGITAL E.PIANO 2 60’S E.PIANO HARPSICHORD VIBRAPHONE STRINGS 1 STRINGS 2 PIPE ORGAN JAZZ ORGAN ELEC.ORGAN 1 ELEC.ORGAN 2 BASS

Keyboard Key Note Name A0 B}0 B0 C1 C{1 D1 E}1 E1 F1 F{1 G1 A}1 A1 B}1 B1 C2 C{2 D2

Program Change 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

Bank Select MSB 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

· The BASS tone can be assigned to the low range of the keyboard only. It cannot be used alone across the full keyboard range.

EN-42

Music Library List

No. *1

Title

1

C1 Nocturne Op.9-2

2 C{1 Fantaisie-Impromptu Op.66

3

D1 Étude Op.10-3 “Chanson de l’adieu”

4 E}1 Étude Op.10-5 “Black Keys”

5

E1 Étude Op.10-12 “Revolutionary”

6

F1 Étude Op.25-9 “Butterflies”

7 F{1 Prélude Op.28-7

8

G1 Valse Op.64-1 “Petit Chien”

9 A}1 Valse Op.64-2

10 A1 Moments Musicaux 3 11 B}1 Impromptu Op.90-2

12 B1 Marche Militaire 1 (Duet)

13 C2 Frühlingslied [Lieder Ohne Worte Heft 5] 14 C{2 Fröhlicher Landmann [Album für die Jugend]

15

D2

Von fremden Ländern und Menschen [Kinderszenen]

16 E}2 Träumerei [Kinderszenen]

17 E2 Tambourin

18

F2

Menuet BWV Anh.114 [Clavierbüchlein der Anna Magdalena Bach]

19 F{2 Inventio 1 BWV 772

20 G2 Inventio 8 BWV 779 21 A}2 Inventio 13 BWV 784

22

A2

Praeludium 1 BWV 846 [Das Wohltemperierte Klavier 1]

23 B}2 Le Coucou

24 B2 Gavotte

25 C3 Sonatina Op.36-1 1st Mov.

26 C{3 Sonatine Op.20-1 1st Mov.

27 D3 Sonate K.545 1st Mov.

28 E}3 Sonate K.331 3rd Mov. “Turkish March”

29 E3 Rondo K.485

30 F3 Für Elise

31 F{3 Marcia alla Turca

32 G3 Sonate Op.13 “Pathétique” 1st Mov. 33 A}3 Sonate Op.13 “Pathétique” 2nd Mov.

34 A3 Sonate Op.13 “Pathétique” 3rd Mov. 35 B}3 Sonate Op.27-2 “Moonlight” 1st Mov.

36 B3 Rhapsodie 2

37 C4 Waltz Op.39-15 (Duet) 38 C{4 Liebesträume 3

39 D4 Blumenlied

40 E}4 La Prière d’une Vierge

41 E4 Csikos Post

42 F4 Humoresque Op.101-7

43 F{4 Melodie [Lyrische Stücke Heft 2]

44 G4 Sicilienne Op.78

45 A}4 Berceuse [Dolly] (Duet)

46 A4 Arabesque 1 47 B}4 La Fille aux Cheveux de Lin [Préludes]

Reference

No. *1

Title

48 B4 Passepied [Suite bergamasque]

49 C5 Gymnopédie 1

50 C{5 Je Te Veux

51 D5 Salut d’Amour

52 E}5 The Entertainer

53 E5 Maple Leaf Rag

54 F5 L’arabesque [25 Etüden Op.100]

55 F{5 La Styrienne [25 Etüden Op.100]

56 G5 Ave Maria [25 Etüden Op.100]

57 A}5 Le retour [25 Etüden Op.100]

58 A5 La chevaleresque [25 Etüden Op.100]

59 B}5 No.13 [Études de Mécanisme Op.849]

60 B5 No.26 [Études de Mécanisme Op.849]

*1 Keyboard Key Note Name

EN-43

Model: PX-S1000

MIDI Implementation Chart

Version : 1.0

Function

Basic Channel

Default Changed

Mode

Default Messages Altered

Note Number

True Voice

Velocity

Note ON Note OFF

After Touch

Key’s Ch’s

Pitch Bender

0

1

5

6, 38

7

10

11

64

65

66

Control

67 71

Change

72 73

Transmitted
1 – 16 1 – 16
Mode 3 X

Recognized
1 – 16 1 – 16
Mode 3 X

Remarks

12 – 120
O 9nH v = 1 – 127 O 8nH v = 0 – 127
X X
X
O X X O 1 O X 4 X 4 O 2 X O 2 O 2 X 4 X 4 X *4

0 – 127 0 – 127

O 9nH v = 1 – 127 O 8nH v = 0 – 127, 9nH v = 0

X O

O
O O O O *1 O O O O O O O O O O

Bank select Modulation Portamento time Data entry LSB, MSB Volume Pan Expression Hold 1 Portamento switch Sostenuto Soft pedal Filter resonance Release time Attack time

Program Change

74 76 77 78 84 88 91 93 94 100, 101
:True #

System Exclusive

X 4 X X X X O 3 X 4 X 4 X 4 X 1
O
O *1

O O O O O O O O O O 1
O 0 – 127
O 1

Filter cutoff Vibrato rate Vibrato depth Vibrato delay Portamento control High resolution velocity prefix Reverb send level Chorus send level Delay send level RPN LSB, MSB

System

: Song Pos

X

X

Common

: Song Sel

X

X

: Tune

X

X

System Real Time
Aux Messages
Notes

: Clock

X

X

: Commands

X

X

: All Sound Off

X *4

O

: Reset All Controller

X *4

O

: Local ON/OFF

X

X

: All Notes OFF

X *4

O

: Active Sense

O

O

: System Reset

X

X

1: For details about RPN and system exclusive messages, see MIDI Implementation at https://world.casio.com/.
2: Depends on the setup of the pedal connected to the DAMPER PEDAL jack. 3: Note ON only 4: Output along with certain operations.

Mode 1 : OMNI ON, POLY Mode 3 : OMNI OFF, POLY

Mode 2 : OMNI ON, MONO Mode 4 : OMNI OFF, MONO

O : Yes X : No

PXS1000-E-2A MA1902-A

References

• PX-S1000 - CASIO

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>