OnReal Live Wireless Camera User Manual

On Real Live Wireless Camera User Manual

Contents

Get to Know Your Live Camera

Setting up your camera for the first time in two steps.

Step 1. Charging the battery
Note: Please charge for at least 2 hours (2.1A) to make sure your device is fully charged.

1. Connect your camera to a power source using the supplied Micro USB cable.
2. The “Charger Status LED” turns green, when your camera is fully charged. While it’s charging, “Charger Status LED” turns orange.

Step 2. Inserting the micro SD card

1. Find the micro SD slot located at the bottom of the camera.                                              Note: Please use brand Micro SD and class 10.(for example,16GB SanDisk class 10)
2. Insert a micro SD card with the gold-plated side facing the same direction as the lens.
3. The card will make a slight clicking sound, when it’s securely inserted.

Powering on your camera

1. Simply press the “Power/Wi-Fi Button” to power on your camera.
2. The “Camera Status LED” will keep flashing green.

How to take photo

1. Press the “Shutter Button”.
2. The “Camera Status LED” will flash red, and your camera will beep.

How to record video

1. Press the “Shutter Button”about 2 seconds, till the “Camera Status LED” flash red,also beep.
2. Shortly press the”Shutter Button” to stop recording, the “Camera Status LED” will be flashing green

How to connect wifi

Note: Please do not attempt to connect to your mobile device (wi-fi) when the battery is low.

1. Camera app

• Open the App store or the Play store on your Mobile phone.
• Search for the app “Neo Me” and install it.

2. On your camera

• Be sure the camera is powered on.
• Short press”Power/ Wi-Fi Button”, the “Camera Status LED” will keep flashing for 3 seconds,then wifi is on.

3. On your phone

• Press the Home button, and then tap Settings > Wi-Fi.
• select the wifi named somehow ” CAM_……….”
• Enter the default password 1234 5678 , tap connect till shows connected.
• Find and open the App “Neome” on your phone , enjoy the live video . You can also download the video to your phone and review it.
• Note: the wifi will be disconnected if you don’t use it for a long time.

LED indicator

1. Camera Status LED

2. Charger Status LED

CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN IN CORRENT TYPE. DISPOSE OF USED BATTERY ACCORDING TO THE INSTRUCTIONS.

Specifications

• Model: G1
• Color: Black
• Weight: 25g
• Dimension : 42mm x 42mm x 20mm
• Chipsets : NTK 96658
• Sensor : SONY IMX179
• Image Sensor Resolution: 8 Mega Pixels
• Wireless : 802.11b/g/n
• Lens : 6G(Glass) 120° Viewing Angle
• Photo Resolution: 8M/5M/2M
• Image Format: JPG
• Video Resolution: 1080P(30fps), 720P(30fps), WVGA-(30fps), VGA(30fps)
• Video Format: MOV
• Video Compression Format: H.264
• Shooting Mode: Single Shot
• Time Lapse Record: 1s/ 5s / 10s / 30s / 60s
• Connections: USB 2.0
• Language: Alternative
• Storage: Up to 64GB micro-SD card (not included)
• Power Supply: Li-ion Battery
• 400mAh Battery Life: about 70 Mins (WIFI Function off)
• Charging time: 2 hours
• Interface : Micro-USB, Micro-SD Card Slot
• Software Support: Android 4.2 or above, iOS 7.0 or above
• Functions support: Gapless Recording , Cycled Recording, WIFI Function, Selfie automatically
• Operating Temperature: 32°F to 104°F (0°C to 40°C)
• Storage Temperature: -4°F to 176°F (-20°C to 80°C)

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>