V I C O VESA Adapter Plate Bracket Kit Instruction Manual

: June 17, 2024
: V I C O

Table of Contents

V I C O VESA Adapter Plate Bracket Kit
Product Information
Introduction
Package Contents
ASSEMBLY STEPS
Contact
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

V I C O VESA Adapter Plate Bracket Kit

V-I-C-O-VESA-Adapter-Plate-Bracket-Kit-PPRODUCT

Product Information

Product Name: VESA Adapter Designed for M1 iMac
SKU: MOUNT-MACM1

Specifications

Compatibility: M1 iMac

FAQ

Q: Is this VESA Adapter compatible with all iMac models?
- A: No, this VESA Adapter is specifically designed for M1 iMac models.
Q: Can I use this VESA Adapter with other monitors?
- A: No, this VESA Adapter is designed specifically for M1 iMac models and may not be compatible with other monitors.
Q: How can I contact customer support if I have any issues with the product?
- A: You can reach our dedicated support team by calling 309-278-5303, chatting with us on our website at www.vivo-us.com, or emailing us at help@vivo-us.com. Our support team is available Monday to Friday from 7:00am to 7:00pm CST.

Introduction

CAUTION

If you do not understand these directions, or if you have any doubts about the safety of the installation, please contact our product support team at 309-278-5303 or help@vivo- us.com for further assistance. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.

WARNING: CHOKING HAZARD

SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

We’re Here for You

Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.

Give us a Call: 309-278-5303
- AVG. RESOLUTION TIME (within office hrs): 5M 4S
Chat Us: www.vivo-us.com
- AVG. RESOLUTION TIME (within office hrs): < 15 M
Email Us: help@vivo-us.com
- AVG. RESPONSE TIME (within office hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr

Package Contents

V-I-C-O-VESA-Adapter-Plate-Bracket-Kit-FIG-3

Included Hardware & Tools

V-I-C-O-VESA-Adapter-Plate-Bracket-Kit-FIG-4

ASSEMBLY STEPS

STEP 1

V-I-C-O-VESA-Adapter-Plate-Bracket-Kit-FIG-5

Partially insert M4x22mm Thumbscrew (S-C) into the center hole of VESA Adapter Plate (A), and M4x37mm Thumbscrew (S-D) into the lower hole of VESA Adapter Plate (A). Press Screw Pads (S-E) onto the ends of the Thumbscrews.

STEP 2

V-I-C-O-VESA-Adapter-Plate-Bracket-Kit-FIG-6

Assemble VESA Adapter Plate (A) and Clamp Plate (B) to the base of the iMac using M4x12mm Thumbscrews (S-A).

NOTE

The Clamp Plate should be pushed all the way up underneath the iMac base, and the curved tabs of the VESA Adapter Plate should be resting over the curved top of the base.

STEP 3

V-I-C-O-VESA-Adapter-Plate-Bracket-Kit-FIG-7

Install VESA Adapter (A) with iMac to the VESA mount using M4x8mm Thumbscrews (S-B).

STEP 4

V-I-C-O-VESA-Adapter-Plate-Bracket-Kit-FIG-8

Use M4x22mm and M4x37mm Thumbscrews (S-C and S-D) to adjust the angle of the iMac screen.
They may be left partially loose to work as a limiter while allowing the screen to tilt freely, or tightened to hold a specific tilt angle.