DEEZEE PS COMBOTANK Combo Transfer Tank Instructions
- June 6, 2024
- DeeZee
Table of Contents
DEEZEE PS COMBOTANK Combo Transfer Tank
1-800-779-2102
Mon – Thurs 7:30am – 5:00pm | Friday 7:30am – 4:00pm CST
PLEASE INSPECT YOUR PRODUCT FOR DAMAGE
BEFORE PROCEEDING TO INSTALLATION
INSTRUCTIONS FOR RETURNS:
ALL PRODUCTS NEED RETURNED TO THE ORIGINAL POINT OF PURCHASE FOR RETURNS,
WARRANTY DEFECTS, OR DAMAGE. FOR MISSING HARDWARE & PARTS, PLEASE CONTACT DEE
ZEE DIRECTLY.
WWW.DEEZEE.COM
REGISTER YOUR PRODUCT ONLINE:
www.deezee.com/registration
VIEW INSTRUCTIONS ONLINE:
www.deezee.com/instructions
Thank you for choosing Dee Zee to add function and accessorize your vehicle. Dee Zee has been a stapl brand in the truck accessory market since 1977 and we hold a reputation of quality manufacturing based in America’s Heartland. Our products are born through careful engineering and backed by industry leading warranty programs. We appreciate the opportunity to serve you and your vehicle! Review the instruction pages in their entirety to prepare the required tools
Warning: Dee Zee Transfer Tanks are NOT to be used to transport flammable
liquids such as gasoline. This tank is manufactured for private use only and
does NOT meet title 49 of the United States Federal Register governing
transportation.
Please check for wiring or other obstructions before drilling any holes in the
vehicle. If it is necessary to drill any holes, Dee Zee recommends putting a
sealant or rust inhibitory around all holes drilled into the body of the
vehicle.
Warning: Before filling the transfer tank with fluid, visually inspect all exterior surfaces for damage. If damage has occurred, do NOT use the tank unless it is first tested for breaches with a harmless fluid such as water.
Threaded Bung: The transfer tank must be vented at all times for expansion and to prevent vacuum formation during liquid removal or pumping. Coat threads with an acceptable thread sealing compound such as LA-CO Slic- tite Paste with Teflon. The screw-threaded portion to prevent fill cap assembly into desired flange. Install the prevent cap on threaded casting, press down, and turn clockwise past the intermediate stop to the last stop. To remove the cap, turn it slowly counter-clockwise to the intermediate stop. After all pressure is relieved, push down and turn counter-clockwise and lift to remove.
Aluminum: When adding a steel pump to an aluminum tank, make sure the
threads on the pump are clean and undamaged. Since aluminum is softer than
steel, the pump will strip the threads in the tank if it’s not installed with
caution.
Steel: It is recommended to keep steel transfer tanks half full with
liquid at all times. The fluid keeps the interior surface lubricated to help
reduce internal corrosion risks.
For an electronic version of these instructions visit: www.deezee.com/instructions Register your product online: www.deezee.com/registration
Liquid Transfer Tanks Cleaning
To be entitled to all warranty rights offered with the product, Dee Zee liquid
transfer tanks need to be cleaned regularly with a mild detergent. Do NOT use
abrasive cleaners.
To view available accessories, diesel fuel pumps and meters visit:
www.deezee.com.
Using a marker, mark the hole location in the four tank attachment points.
Check the underside of the truck bed below the marked locations for
clearance. If something is in the way of the marked location, shift the tank
to avoid the obstruction.
Remove the tank from the truck bed, and drill a 3/8″ hole at each of the
marked locations. Check with manufacturer/body shop for recommendations for
sealing drilled holes.
After drilling the holes, return the tank to the truck bed and align the
tank mounting locations with the holes in the truck bed.
Depending on when your tank was made, it may be necessary to drill 3/8″ holes
through the four tank mounting points also.
At the mounting two locations towards the REAR of the tank only, place a 5/16″
bolt [B] and 5/16″ washer [C] down through the mounting location hole. From
the underside of the truck place a rubber bumper [E], 5/16″ washer [C], and
5/16″ lock nut [D] onto the bolt.
DO NOT COMPLETELY TIGHTEN AT THIS TIME.
Replace the chest box on to the tank and align the slot in the brace with the hole in the mounting points on the sides of the tank.
At the side mounting locations, place a 5/16″ bolt [B] and 5/16″ washer [C] down through the mounting location hole. From the underside of the truck place a rubber bumper [E], 5/16″ washer [C], and 5/16″ lock nut [D] onto the bolt.
FOR ALL FOUR MOUNTING LOCATIONS
Tighten the nut and bolt using a 1/2″ socket and wrench until the rubber
bumper comes into contact with the underside of the truck bed. Grab the rubber
bumper and try to rotate it around the bolt. If the rubber bumper can still
rotate on the bolt, continue to tighten the nut until the rubber bumper can no
longer be turned by hand. Once the rubber bumper can no longer be turned by
hand, tighten the nut one additional 360-degree turn.
DEE ZEE, INC. WARRANTY AGREEMENT
Dee Zee, Inc. guarantees the original purchaser a limited lifetime warranty against manufacturer defects in materials, workmanship, and design under normal use, excluding damage resulting from road hazards such as gravel or other debris, product misuse, improper installation, impairments from accidents, product modifications, improper repairs, spills, vandalism, product neglect, or acts of God.
This warranty applies only to the original purchaser of new product(s) and is limited to the replacement of genuine Dee Zee products. Modification of any kind to Dee Zee products voids all warranty coverage. Warranty does not include electrical components, installation, cost of removal, labor, transportation costs, loss of use, inconvenience, or consequential damages.
WARRANTY COVERAGE – MATERIALS & WORKMANSHIP
LIMITED LIFETIME WARRANTY:
- STAINLESS STEEL: Side Steps, Grill Guards, Bull Bars, Bed Caps, and Side Rails
- ALUMINUM: Side Steps, Running Boards, Storage Boxes, Transfer Tanks, Bed Protection, Invis-A-Racks, and Cab Racks
- PLASTIC: Storage Boxes and Bed Caps
THREE-YEAR WARRANTY:
- POWDER-COATED / E-COATED STEEL: Side Steps, Running Boards, Storage Boxes, Transfer Tanks, Cab Racks, Ladder Racks, and Cargo Carriers
- OTHER: Tailgate Assist, Bed Mats, Floor Mats, and Auxiliary Fuel Connection Kits
- All Products Not Otherwise Listed Individually
WARRANTY COVERAGE – FINISH PROTECTION
The finish of all Dee Zee products is covered for one-year (1) from the date
of purchase. Dee Zee products have a high-quality finish that must be cared
for and maintained like any other exposed finish on the vehicle. Protect the
finish with non-abrasive automotive wax (e.g. Pure Carnauba) on a regular
basis. Applying soaps, polishes, or waxes that contain an abrasive compound
may scratch the finish and leave the exposed material susceptible to
corrosion.
WARRANTY COVERAGE – COMPONENT PARTS
Operational items such as shocks, latches, hinges, and wear items including,
but not limited to, mud flaps, step pads, end caps, hardware, seals, etc. have
a one-year (1) warranty. Replacement component parts can be ordered via credit
card
(MasterCard or VISA) by calling
1-800-779-2102. All replacement parts
are non-returnable and non-refundable.
GPI® TRANSFER TANK PUMPS & ACCESSORIES:
All Great Plains Industries (GPI) products, including transfer tank pumps and
fuel meters are covered by GPI’s warranty policies. Dee Zee’s warranty terms
do not apply to GPI products. To submit a warranty claim, please contact GPI
at 1-800-835-0113 or visit www.gpi.net.
WARRANTY SUBMISSION PROCEDURE
All warranty claims will be initiated at the place of purchase. The original
purchaser will be required to present the original sales receipt with purchase
date shown and provide photographs of the defect.
In the event the originally purchased product style is no longer available,
Dee Zee will warranty the defective part with a current equivalent. If a
comparable product is no longer available, the product would be returned to
the store of purchase for a refund or the applicable cost difference can be
paid to choose an alternate style.
DISCLAIMER
Buyer assumes all risk, liability, and cost for the installation and use of
Dee Zee products. All products are sold as appearance accessories and should
not be relied upon as protection for the vehicle or its occupants in the event
of an accident. Vehicles equipped with a supplemental restraints system
(airbags) deployed by impact and collision avoidance systems should not be
modified in any way. Always consult the vehicle manufacturer if you have any
questions regarding supplemental restraint systems and sensors. Dee Zee, Inc.
assumes no liability for injury, loss, incidental or consequential damages in
the event of an accident.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>