PIONELE E16 Wireless Earbuds with Charging Case User Manual
- June 4, 2024
- PIONELE
Table of Contents
PIONELE E16 Wireless Earbuds with Charging Case
Product Overview
What’s in the Box
- E 16 Earbuds x 2
- E 16 Charging Case
- USB-C Cable XT
- User Manual X
How to Pair
Open the charging box, the left and right earphones will automatically form a TWS team, After the team is successfully formed, the white lights on both ears will flash slowly.
- Select Pionele E 16 under bluetooth menu on your device. The pairing is succes ful
- Congratulations, your Pionele E 16 earphones have been successfully connected. After the connection is successful, the indicator light will be off. You can take it out and use it alone, or you can use two earphones together to enjoy music.
- When you use it again, you only need to open the charging box, and the headset can automatically reconnect to the last connected device. After the connection is successful, the left and right earphone lights will turn off.
- Connect to a Nev Device When you want to connect to a new device, disconnect this connec- tion, the earbuds will turn to pairing mode.
Tauch Cantral
Power on
-
The earphones are taken out of the charging box and the earphones are automatically turned on.
-
Press and hold the touch button for 3 seconds, the headphone is turned on manually.
Power off -
Put the earphone into the charging box, and the earphone will automatically shut down.
-
Press and hold the touch button for 8 seconds, the headset will be manually turned off.
charge the earphone -
Put the earphone back into the charging box to charge, the white light is always on, and the light is off when fully charged.
Low battery reminder
When the earphone is low in battery, the earphone will play a low-battery tone
to remind you to charge.
factory reset
When the two earphones fail to team up or connect via Bluetooth, try a factory reset as explained below.
- When a single earphone is not connected, press the touch key 5 times to perform clearing and automatically shut down.
- Repeat the above steps for the other earphone.
- After clearing, the dual earphones restart automatically to form a team. After the team is successfully formed, the white light of the dual earphones flashes slowly.
Charging the Charging Case
Use the USB-C Cable to charge the charging case. When the charging box is
charging, the indicator light of the charging box is always on, and it is off
when fully charged.
Turn on the earphone box
In shutdown state. press and hold the multi-function button for 3 seconds to
turn it on.
Turn off the earphone box
In the power- on state, press and hold the multi-function button for 3 seconds
to power off.(lf you don’t let go for 5 seconds, Clearing the pairing record
will be performed.)
Earphone box pairing mode
It will automatically enter pairing mode after power on.
Earphone box connection equipment
Device search “Pionele E 16” pairing name and click connect.
The earphone box connection timed out
- Pairing mode: The earphone box will automatically shut down if it is not connected within 3 minutes after it enters the pairing mode.
- Over-distance connection: The earphone box will automatically shut down if it does not return to the range after 3 minutes beyond the connection range.
- Disconnect: The earphone box will automatically shut down if the device is not connected after 3 minutes of disconnection.
link back
- Power oft state: After the earphone is turned on, it will reconnect to the last connected device.
- Over-distance status: The earphone box returns to the last connected device after it returns to the connection range.
Earphone box button control
Clear pairing record
Press and hold for about 3 seconds to hear a “dong” sound, don’t let go, until
you press and hold for about 5 seconds, you hear the “pairing prompt to
disconnect the Bluetooth and clear the pairing record,
Earphone box low battery reminder
When connected, “Battery Low is reminded every minute.
FAQ
-
How to Switch Mono Mode to Dual Mode.
- when you just only use the right earbud, take out the left earbud from charging case, the music will come out from the left and right earbuds at the same time.
- when you just only use the left earbud, take out the right earbud from charging case, the music will come out from the left and right earbuds at the same time.
-
How to Switch Dual Mode to Mono Mode.
- When you put your right earbud into the charging case, the left earbud ill continues playing music.
- when you put your left earbud into the charging case, the right earbud wIll continue playing music.
-
The earbuds cannot reconnect to my device automatically.
If your earbuds are connected to several devices before, they will reconnect automatically with the recently connected device,- Make sure the Bluetooth of the mobile phone is turned on, close the cover again, and turn on the headset again.
- if the left and right ear lights are off after the headset is turned on, it means that the headset is connected to other mobile phones, tun off the Bluetooth of the mobile phone that has been connected to the headset, the white lights on both ears flash slowly, the headset automatically enters the pairing mode, and then use the current mobile phone t0 search for connection.
- Let the earphone reset to factory settings, and then use the current phone to search ftor the connection again.
-
When the left and right headphones cannot be connected , put the left and right headphones into the charging box, open the charging box, and the left and right headphones automatically form a TWS team. After the left and right headphones are interconnected successfully, the binaural white light flashes slowly, and the headphones enter the pairing mode. If the above operations are invalid, please try to restore the factory settings.
-
No sound from left/right earbud.
Please put your earbuds into the charging case, and then take out them again. IF still not solve this problem, please carry out restoring the tactory settings(Page 7), and then put your earbuds into charging case and then take out them again. -
Can’t turn on my earbuds
- Put the earbuds into the charging case again, and make sure that the earbuds is in the compartment and there is no shaking.
- Close the cover, then charge the charging case. After flushing for a period of time, open the cover again and try to activate the headset.
FCC and IC Statement
This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following twvo conditions
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation CAN ICES-3(B)
FCC/IC Radiation Exposure Statement
This equipment complies with FOCAIC RSS-102 radiation exposure limits set
forth for an uncontrolled environment.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, it not installed and used in accordance with the
instructions may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment dose cause harmtul interfence to radio or
television reception, which can be deter- mined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receving antenna
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.