technical concepts OneShot Foam Touch-Free Soap System Instruction Manual
- June 7, 2024
- technical concepts
Table of Contents
OneShot® Foam Touch-Free Soap System
Installation & Operation Instructions
INSTALLATION
The System Components
A. Spout Assembly
B. Mounting Nut Wrench
C. Low Battery Indicator (yellow)
D. Low Refill Indicator (red)
E. Adhesive Washer
F. Spacers
H. Lock Washer
I. Mounting Nut
J. Sensor Cord Connection
K. C-Clip
L. Motor Assembly
M. Red Reset Button/Prime
N. 800ml/1600ml Switch
O. Power Cord Connection
P. Battery Pack with Mounting Tape Pad
Q. Soap Refill Cartridge (not included)
R. Optional: Screws and Anchors for Battery Pack
S. Wall Clips for Power Cord
Prior to Installation
- Ensure the hole is 15 /16″ to1¹ /4″ in diameter.
- Ensure Soap System does not interfere with the sink & plumbing under the counter.
Installation of Dispenser
- If using the spacer, line up the guide pins on the spacer with the pinholes on the bottom of the spout.
Installation of Soap Refill
ATTENTION
- When handling the soap refill cartridge, do not handle by tube. For proper operation, ensure that tubing is not loose or bent.
- If using the 1600ml refill, snap open the black rubber seal. Move the switch from “UP” (1K) to the “DOWN” (2K) position.
Reseal black rubber seal.
IMPORTANT
- Press the refill reset button (M). This will automatically prime the soap refill bottle and initiate a counting mechanism.
Operation
- Flashing red light indicates low to refill.
- Flashing yellow light indicates low battery.
- Battery Pack uses 4 “D”-Cell Alkaline Batteries (not included)
Innovative Hygiene Solutions
World Headquarters:
Serving North and South America
Technical Concepts LLC
1301 Allanson Road
Mundelein, Illinois 60060 U.S.A.
Toll-Free: 1-800-551-5155
Fax: 1-800-551-5046
www.technicalconcepts.com
European Headquarters:
Serving Europe, Africa and Middle East
Technical Concepts International Ltd.
Peterborough, PE2 6WA, England
Phone: +44 (0)870 568 6824
Asian Headquarters:
Serving Asia and Pacific
Technical Concepts Asia
14100, Penang, Malaysia
Phone: (60) 4 508 5008
E001266 Rev 01
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>