Munters Platinum Pro Climate Controller Installation Guide

June 7, 2024
Munters

Platinum Pro Climate Controller

Installation Manual

Platinum Pro/Platinum Touch/One
Controller /One Pro

Platinum Pro/Platinum Touch/One Controller/One Pro
Climate Controller
Ag/MIS/ImAr-2552-04/18 Rev 1.3 P/N: 117728 Arabic

Platinum Pro/Platinum Touch/
One Controller/One Pro
Installation Manual
Rev 1.3 07/20
This manual for use and maintenance is an integral part of the apparatus together with the attached technical documentation. This document is destined for the user of the apparatus: it may not be reproduced in whole or in part, committed to computer memory as a file or delivered to third parties without the prior authorization of the assembler of the system.
Munters reserves the right to effect modifications to the apparatus in accordance with technical and legal developments.

2

© Munters AB, 2018

Index

page

chapter

5- ——————————– ——————————– ——————————– INTRODUCTION 1
5….. ………………………….. ………………………….. …………………………..Introduction 1.2 5—- ——————————– ——————————– ——————————– Notes 1.3
6 ———— ——————————– ——————————– ——————————– 2 6— ——————————– ——————————– ——————————– 2.1 6—- ——————————– ——————————– ——————————– 2.2 6—————– ——————————– ——————————– 2.3 6 —————————– ——————————– ——————————– 2.4 8 ——– ——————————– ——————————– ——————————– 3 8- ——————————– ——————————– ——————————– 3.1

10 — ——————————– ——————————– ——————————– 3.2

13 ————————- ——————————– ——————————– 3.3 14 —————————– ——————————– ——————————– 3.4 15 —— ——————————– ——————————– ——————————– 4 15 —————— ——————————– ——————————– Platinum Pro 4.1
17 ———————– ——————————– ——————————– One Controller 4.2

20 – ——————————– ——————————– ——————————– 5
20 —————————— ——————————– ——————————– 5.1 20 ———————- ——————————– ——————————– RPLP 5.2 21 ———————- ——————————– ——————————– 5.3

23 ———- ——————————– ——————————– 5.4

3

© Munters AB, 2018

25 ———————- ——————————– ——————————– 5.5 26 ———————- ——————————– ——————————– 6 26 ———— ——————————– ——————————– 6.1

30 ————— ——————————– ——————————– 6.2 31 ————– ——————————– ——————————– 6.3 32 ———– ——————————– ——————————– 6.4 33 —————- ——————————– ——————————– 6.5 35 ————— ——————————– ——————————– 6.6

37 ————————— ——————————– ——————————– :A 7 37 —————— ——————————– ——————————– 7.1 38 —- ——————————– ——————————– ——————————– 7.2 39 ———————– ——————————– ——————————– 7.3 40 —————————- ——————————– ——————————– 7.4 41 ——————– ——————————– ——————————– 7.5
46 —— ——————————– ONE CONTROLLER :() :B 8 46 —— ——————————– ——————————– ——————————– 8.1 47 ———————- ——————————– ——————————– 8.2 48 ————- ——————————– ——————————– 8.3 48 ——————- ——————————– ——————————– One Pro 8.4 49 ———————- ——————————– ——————————– :C 9 49 ————————– ——————————– ——————————– 9.1 49 —————————- ——————————– ——————————– 9.2 49 —————— ——————————– ——————————– 9.3 50 ———— ——————————– ——————————– 9.4 50 ——————— ——————————– ——————————– 9.5

51 ————- ——————————– ——————————– . 10 52 —- ——————————– ——————————– ——————————– WARRANTY 11

4

© Munters AB, 2018

1 Introduction
1.1 Disclaimer
Munters reserves the right to make alterations to specifications, quantities, dimensions etc. for production or other reasons, subsequent to publication. The information contained herein has been prepared by qualified experts within Munters. While we believe the information is accurate and complete, we make no warranty or representation for any particular purposes. The information is offered in good faith and with the understanding that any use of the units or accessories in breach of the directions and warnings in this document is at the sole discretion and risk of the user.
1.2 Introduction
Congratulations on your excellent choice of purchasing a Platinum Pro/Touch , One Pro, or One Controller. In order to realize the full benefit from this product it is important that it is installed, commissioned and operated correctly. Before installation or using the fan, this manual should be studied carefully. It is also recommended that it is kept safely for future reference. The manual is intended as a reference for installation, commissioning and day- to-day operation of the Munters Controllers.
1.3 Notes
Date of release: July 2010 Munters cannot guarantee to inform users about the changes or to distribute new manuals to them. All rights reserved. No part of this manual may be reproduced in any manner whatsoever without the expressed written permission of Munters. The contents of this manual are subject to change without notice.

5

© Munters AB, 2018

2

2.1
. .
. .
. COM COM
.
2.2
EMI . .
2.3
). ( 2. 7 . .
2.4
. . :

6

© Munters AB, 2018

1. 2.
3.

7

© Munters AB, 2018

3

3.1

Platinum Pro One Controller

PLATINUM PRO 3.1.1

100 ­ 240 · Platinum Touch 30: 1A, 50/60 Hz · Platinum Pro 30: 0.6A, 50/60 Hz ·
C-P3- 240 2 · NO-RC-30A
C-P3- 240 1 · NC-RC-30A
C-P3- 240 1 · WC-RC-30A
20 0-5 ·
20 0-10 ·
1. 5 5 ·
(14 + 50 0 Platinum Touch 30: · ) 125
14) 40 + 0 :Platinum Pro 30 · ( 104
·
%10 -/+ : · : · 2 : ·
( 6500) 2000 · ·
31 %80 :Platinum Touch 30 o %16.7 ( 88)
( 122) 50

8

© Munters AB, 2018

  1. 31 %80 :Platinum Pro 30 · %50 (
    ( 104) 40
    · ·
    250 3 ·

ONE CONTROLLER 3.1.2

100 ­ 240 · 0.6A, 50/60 Hz ·
C-P4- 240 2 · NO5-RC
C-P4- 240 1 · NC5-RC
C-P4-WC- 240 1 · RC
20 0-5 ·
20 0-10 ·
1. 5 5 ·
( 104 14) 40 + 0
%10 -/+ : · : · 2 : ·
( 6500) 2000 · ·
31 %80 :Platinum Touch 30 o %16.7 ( 88)
( 122) 50 88) 31 %80 :Platinum Pro 30 · %50 (
( 104) 40
· ·
250 3 ·

9

© Munters AB, 2018

3.2

Platinum Pro One Controller
3.2.1 30 Platinum Pro 50 One Controller 50 30 Panel Mounts
PLATINUM PRO 3.2.2
. Platinum Touch Platinum Pro

Platinum Touch / Platinum Pr o :1

:1

1

( Touch) 6

2

7

3

Expansion unit/RLED 8

(

4

/ – 9

5

10

© Munters AB, 2018

Platinum Pro 30 ONE CONTROLLER 3.2.3

One Controller / One Pro 2:

:1

1

( Touch) 6

2

7

3

8

(

4

/ – 9

5

. 2 :1

11

© Munters AB, 2018

One Controller 3:

12

© Munters AB, 2018

3.3
:Platinum Pro/One Controller
Platinum Pro Expansion )Farm Light/RLED 2. 0 ( 4
HUB-441
. .

RLED 2. 0 5:

Platinum Pr o Expansion 4:

7:

HUB 6:

13

© Munters AB, 2018

3.4 : ! :
:

14

© Munters AB, 2018

4
Platinum Pro/One Controller. :() Panel Mounts
Platinum Pro 4.1

4.1.1 ) x8 () x4 ( 1.
.
2. .

). ( 3. . 4.
4.1.2 .
.
! . CAUTION
. . 1.

15

© Munters AB, 2018

8:
. . 2.
(2) Munters ). (

9: . . 3.

16

© Munters AB, 2018

10:
One Controller 4.2
4.2.1 One Controller Touch ·
· 12 · 4.2.2 . One Controller Touch

: 12

: 11

17

© Munters AB, 2018

. · . ·
. · 4.2.3
. One Controller Touch
! One Controller Touch
. -1
: 13 :One Controller Touch -2
o o

: 14 . One Controller -3

18

© Munters AB, 2018

: 15

19

© Munters AB, 2018

5
: ! !WARNING
! CAUTION 20 ,
21 , 23 · . CAUTION .
5.1 (1). (2). o (3). o (4) ROW 2 1: 50/60 230

16:
RPLP 5.2
. RPLP )!P-RPLP-1-V2 ( 230 RPLP CAUTION
:RPLP . Platinum Pro RPLP 1. . Platinum Pro 1 RPLP 2. (4). Platinum Pro 2 RPLP 3.
50/60 230 o 2 1 : o
ROW o

20

© Munters AB, 2018

RPLP 17:
5.3 PLATINUM PRO 5.3.1 . ). ( 1.

18:

18

1

. // 2.

21

© Munters AB, 2018

2

19

19:

1

ONE CONTROLLER 5.3.2 ). (

20:

18

1

. // 3.

22

© Munters AB, 2018

2

19

21:

1

5.3.3
. Platinum Pro 1.. . 2.

22:
. 3.
5.4 ( .
. / ) RBU – 27 . RBU -3 RBU -5 Munters .
.
PLATINUM PRO 5.4.1 . . 7 – 10
. 1.

23

© Munters AB, 2018

23:

23

) ( 2

) (

1

. 2.

: 3
2 1 ·
·

/ 24: 24 ) ( 1
) ( 2

ONE CONTROLLER 5.4.2 . . :
.

24

© Munters AB, 2018

25:

23

) ( 2

) (

1

. 3.

: 3
2 1 ·
·

/ 26: 24 ) ( 1
) ( 2

5.5
( ). 15

25

© Munters AB, 2018

6

·
· ·

:
·
· ·

6.1
: 12 ( C-P3-RAIC12: ) Platinum Pro .
. ! AWG 22
! . COM COM
6.1.1
: -12
: T1 ­ T8
: IN1 ­ IN4
COM : V+12 ) (12 : V3. 3 ) (3. 3

. IN1 ­ IN4
CAUTION !!

26

© Munters AB, 2018

1: 4 ­ 20 · ) (
) ( 2: 0 ­ 5 · 3: ·
4: ·
6.1.2
1-8: . COM .
) T 4 ( ( : IN1 ­ IN4 .
. 27

27:

27 IN4 4

T1 1

5

T3 2

IN2 3

6.1.3
. COM 1. . 1 : IN1 ­ IN42.
. 28

27

© Munters AB, 2018

. 28:

28 IN 1 ­ IN 4 4 IN 1 ­ IN 4 1

COM 5

12+ 2

3

6.1.4
. 3. 3 COM ) (10 – 20 1. . ) POT 3 ( : . IN1 ­ IN42. . 29

28

© Munters AB, 2018

29

29:

3

3. 3 1

IN2 2

6.1.5
. +12 COM 1. . 2 : IN1 ­ IN42.
30

30:

30 +12 3

IN2 1

4

IN1 2

29

© Munters AB, 2018

6.2 : ) (
:RAIC-12) P-WS-WDS ( 1. . POT COM .
. 3 : . IN1 ­ IN4. :RDIC-12 2.
. COM o :RDIC-12) P-WS-WRS ( 3.
. COM o . 34 33 32
32:

33:

30

© Munters AB, 2018

34:
COM .

IN1 4 5

34 33 / 32 / IN3 1
3. 3 2 COM 3

6.3
12 ) C-P3-RDIC12: ( Platinum Pro . COM .
Munters . .
.

31

© Munters AB, 2018

35

C-P3-RDIC12 35:
1 1 2 2 3 3

6.4
10 ) C-P3-RAOC10 ( Platinum Pro . 0 – 10
.
! CAUTION

32

© Munters AB, 2018

C-RAOC12 36:

36

3

1: 1

8: 2 :

.

6.5
) Munters (C-PP-P3-ALARM . 430 Munters’ P-RLVP
. RPLP

: :

33

© Munters AB, 2018

“. ” “. ”
/ 37: . ” “” ”
” ” ” ”
.
” ” 38: 38
12 1 .

34

© Munters AB, 2018

C-P3 39:
39 12 1 Munters’ P-RLVP . RPLP 6.6 . . ) 10 :1 (. RS-232: 900-99- ·
00112
RS-485: 900-99- · 00101
6.6.1

RS-232 40:
! TX-RX CAUTION

35

© Munters AB, 2018

RS-485 41:
! COM ! CAUTION
6.6.2
: . RS-485 Platinum Pro / ·
. Platinum Pro ·
/ 42:
43:

36

© Munters AB, 2018

:A 7
: Platinum Touch Panel Mount Platinum Pro
/

7.1 :
. · . · . ·
.( 50)

37

© Munters AB, 2018

7.2

Platinum Touch 50 44:

Platinum Touch 50 45:

38

© Munters AB, 2018

7.3

Platinum Touch 30 Platinum Pro 30 46:

Platinum Touch 50 Platinum Pro 50 47:

39

© Munters AB, 2018

7.4 :48

40

© Munters AB, 2018

:49
.( ) .57 56 20
380 × 480 :Platinum Touch 30 Platinum Pro 30 o 380 × 580 :Platinum Touch 50 Platinum Pro 50 o
/ 8 / 20 .
.
.DIN
./
7.5
: .
/ : :

41

© Munters AB, 2018

:51

:50

Platinum Pro 30 . 30Platinum Touch
: . Platinum Touch 5 0 Platinum Pro 50
4 :Platinum Pro 30 o 6 :Platinum Pro/Touch 50 o

7.5.1
! / )
( .

7.5.2

. .1

42

© Munters AB, 2018

:52

. .2
:53 . . 3

43

© Munters AB, 2018

:54 : / .4

/ :55

44

© Munters AB, 2018

. .5

:56

45

© Munters AB, 2018

:() :B 8 One Controller

One Controller :(1)

8.1
: ( 10) One Controller
( ) · ·
( ) ·
. o . o

46

© Munters AB, 2018

:(2) . .
8.2
One Controller · One Controller .
. ) / () ·
. (
J3 o . o

:(3)

47

© Munters AB, 2018

8.3
. ·
.
One Pro 8.4
. One Pro . ( )
.

48

© Munters AB, 2018

:C 9

. . .
9.1
.
. : 1. . . ” 3/4 5/8″ : 2. ). (10 3 ) (8 2. 5 : 3.
. : 4.
. 5.
. . : 6. 7. .
. . ) (4 10 : 8.
. ) (2. 5 80
. 10 10 ) (8 20 ) NEC (
. 10
9.2
.
. : 1. 20 . 6) ( 16 : 2.
4). ( 20 ). (10 3 ) (8 2. 5 : 3.
. . . ) (6 15
.
9.3
. . .

49

© Munters AB, 2018

. .
9.4
. . .
. .
.
9.5
Munters ). (
9.5.1
RPLP-1 . RPLP-1 RPLP-1 . RPLP-1 Munters .
. .
. RPLP-1
9.5.2
RCLP-1 . RCLP-1 .
. RCLP-1 Munters

50

© Munters AB, 2018

.10
. One Pro One Controller
. .
:1.1.0 1.02 .( ) ·
. ·
:57

51

© Munters AB, 2018

11 Warranty

Warranty and technical assistance
Munters products are designed and built to provide reliable and satisfactory performance but cannot be guaranteed free of faults; although they are reliable products they can develop unforeseenable defects and the user must take this into account and arrange adequate emergency or alarm systems if failure to operate could cause damage to the articles for which the Munters plant was required: if this is not done, the user is fully responsible for the damage which they could suffer.
Munters extends this limited warranty to the first purchaser and guarantees its products to be free from defects originating in manufacture or materials for one year from the date of delivery, provided that suitable transport, storage, installation and maintenance terms are complied with. The warranty does not apply if the products have been repaired without express authorisation from Munters, or repaired in such a way that, in Munters’ judgement, their performance and reliability have been impaired, or incorrectly installed, or subjected to improper use. The user accepts total responsibility for incorrect use of the products.
The warranty on products from outside suppliers fitted to the controller, (for example Platinum Pro’s antennas, power supplies, cables, etc.) is limited to the conditions stated by the supplier: all claims must be made in writing within eight days of the discovery of the defect and within 12 months of the delivery of the defective product. Munters has thirty days from the date of receipt in which to take action, and has the right to examine the product at the customer’s premises or at its own plant (carriage cost to be borne by the customer).
Munters at its sole discretion has the option of replacing or repairing, free of charge, products which it considers defective, and will arrange for their despatch back to the customer carriage paid. In the case of faulty parts of small commercial value which are widely available (such as bolts, etc.) for urgent despatch, where the cost of carriage would exceed the value of the parts, Munters may authorise the customer exclusively to purchase the replacement parts locally; Munters will reimburse the value of the product at its cost price.
Munters will not be liable for costs incurred in demounting the defective part, or the time required to travel to site and the associated travel costs. No agent, employee or dealer is authorised to give any further guarantees or to accept any other liability on Munters’ behalf in connection with other Munters products, except in writing with the signature of one of the Company’s Managers.
WARNING: In the interests of improving the quality of its products and services, Munters reserves the right at any time and without prior notice to alter the specifications in this manual.
The liability of the manufacturer Munters ceases in the event of:
· dismantling the safety devices; · use of unauthorised materials; · inadequate maintenance; · use of non-original spare parts and accessories.
Barring specific contractual terms, the following are directly at the user’s expense:

52

© Munters AB, 2018

· preparing installation sites; · providing an electricity supply (including the protective equipotential bonding (PE) conductor, in
accordance with CEI EN 60204-1, paragraph 8.2), for correctly connecting the equipment to the mains electricity supply; · providing ancillary services appropriate to the requirements of the plant on the basis of the information supplied with regard to installation; · tools and consumables required for fitting and installation; · lubricants necessary for commissioning and maintenance.
It is mandatory to purchase and use only original spare parts or those recommended by the manufacturer.
Dismantling and assembly must be performed by qualified technicians and according to the manufacturer’s instructions.
The use of non-original spare parts or incorrect assembly exonerates the manufacturer from all liability.
Requests for technical assistance and spare parts can be made directly to the nearest Munters office. A full list of contact details can be found on the back page of this manual.
Munters USA 2691 Ena Drive Lansing, MI 48917-8521 United States Tel: +1 517 676 7070 Toll Free: +1 800 227 2376 Fax: +1 517 676 7078

53

© Munters AB, 2018

Ag/MIS/ImAr-2552-04/18 Rev 1.3

www.munters.com
Australia Munters Pty Limited, Phone +61 2 8843 1594, Brazil Munters Brasil Industria e Comercio Ltda, Phone +55 41 3317 5050, Canada Munters Corporation Mason, Phone +1 517 676 7070, China Munters Air Treatment Equipment (Beijing) Co. Ltd, Phone +86 10 80 418 000, Denmark Munters A/S, Phone +45 9862 3311, India Munters India, Phone +91 20 3052 2520, Indonesia Munters, Phone +62 818 739 235, Italy Munters Italy S.p.A., Chiusavecchia, Phone +39 0183 52 11, Japan Munters K.K., Phone +81 3 5970 0021, Korea Munters Korea Co. Ltd., Phone +82 2 761 8701, Mexico Munters Mexico, Phone +52 818 262 54 00, Russia Munters AB, Phone +7 812 448 5740, Singapore Munters Pte Ltd., Phone +65 744 6828, South Africa and Sub-Sahara Countries Munters (Pty) Ltd., Phone +27 11 997 2000, Spain Munters Spain S.A., Phone +34 91 640 09 02, Sweden Munters AB, Phone +46 8 626 63 00, Thailand Munters Co. Ltd., Phone +66 2 642 2670, Turkey Munters Form Endüstri Sistemleri A., Phone +90 262 751 37 50, USA Munters Corporation Mason, Phone +1 517 676 7070, Vietnam Munters Vietnam, Phone +84 8 3825 6838, Export & Other countries Munters Italy S.p.A., Chiusavecchia Phone +39 0183 52 11

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals