SIMONIZ SaniClean Hand Sanitizer Dispenser Instruction Manual

SIMONIZ SaniClean Hand Sanitizer Dispenser Instruction Manual

HAND SANITIZER DISPENSER INSTRUCTION MANUAL

COMPONENT DESCRIPTIONS
I ON / OFF SWITCH II POWER INDICATOR LIGHT Ill INFRARED SENSOR IV DISPENSING HOLE V RESERVOIR VI BATTERY COMPARTMENT

WALL MOUNTING INSTRUCTIONS TO MOUNT ADHESIVELY

1.  Remove the protective covering and stick firmly to the location of your choice.
2. The adhesive is secured into the location on the unit. Ensure it has not shifted prior to installation

TO MOUNT WITH HARDWARE

1.  Drill two holes with a center distance of 8 cm into desired mounting location
2. Open the unit and position the holes in the unit over top of the drilled holes. Screw the included screws through the unit holes into the wall.

FILLING THE RESERVOIR

1. Use one hand to firmly press on the opening tab (shown below) and the other hand to assist in opening the front cover.
2. Remove the reservoir plug and fill with gel sanitizer (MAX. 1000ml / 33.Soz).
3. Replace the reservoir plug and securely close the unit.

BATTERY REPLACEMENT

1. Use one hand to firmly press on the opening tab (shown below) and the other hand to assist in opening the front cover.
2. Open the battery compartment and replace with 4*C batteries.

STAND INSTALLATION (FOR UNITS WITH FLOOR STANDS)
COMPONENT DESCRIPTIONS I BASE IV SCREWS+ WASHERS

1. Insert II into I II ROD (THICK END) V PLASTIC LOCK UNIT

2. Secure the rod firmly with screws + washers Ill ROD (THIN END) VI BACK PANEL

3. Use V to secure Ill to 11, adjusting to your preferred height before tightening V.

4. On the telescopic pole, use hexagon bolts to fix the panel to the pole.

5. Once stand is installed, remove the dispenser and use the hooks on the fixed panel to secure the unit

6. Snap the drip tray into the fixed plate

WARNINGS

• Use dispenser only as directed.
• Do not use in areas where dispenser is exposed to wet environments like showers or outdoors.
• Do not install in extreme hot or cold locations.
• Dispensed product is for external use only. Refer to refill product for further information

CLEANING AND MAINTENANCE

Clean exterior surface with warm water and mild soap, dry with soft cloth. For product information,
call Mr. Brands Customer Service:
877-420-7555
Distributed by Mr. Brands, LLC
Bristol PA, 19007
Made in China

STANDARD ONE YEAR MANUFACTURER WARRANTY:

The manufacturer warrants this product to be free from defects in workmanship and materials, under normal expected use and conditions, for a period of one (1) year from the original invoice date. Shipping and handling fees are to be paid for by the customer. The manufacturer agrees, at its option during the warranty period, to repair any defect in material or workmanship or to furnish a repaired or refurbished product of equal value in exchange without charge (except for a fee for shipping, handling, packing, return postage, and insurance which will be incurred by the customer). Such repair or replacement is subject to verification of the defect or malfunction and proof of purchase as confirmed by showing the model number on original dated sales receipt.

CLAIM PROCEDURES: .

Claims for defective merchandise must be made within ONE year from invoice date. Claims for missing parts must be made within 60 calendar days after the merchandise is received . Any claim for defective merchandise returns must be packed in original packaging . We reserve the right to specify that items be returned to the original warehouse for inspection or be inspected by our representative in the field . Pictures are required to claim defective merchandise, along with a copy of the original invoice • If the claim is justified, the item(s) or part(s) will be repaired or replaced or a credit will be issued. It is our policy to replace parts whenever possible

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>