SILVER MANKEY SMA232 RSH Wallet Tracker Card Key User Manual
- June 1, 2024
- SILVER MANKEY
Table of Contents
User Manual
SMA232
Manual Version 1/20240328
SMA232 RSH Wallet Tracker Card Key
Carefully read these instructions before using the product. Keep it for future reference.
Safety information
- Avoid direct contact with water and other liquids.
- Do not use the device in a humid environment.
- Keep the device out of the reach of children. They may swallow some parts.
- Use the device only in accordance with the operating instructions.
- If the device stops working properly – contact us.
Package contents
- Finder
- User manual
Quick instructions
Power On / Off
Press the Silver Monkey Tag Card Switch on/off Button once to turn it on. It
should beep once to indicate that it is powered on. To power off, hold the
same button for 3 sec. You will hear short beeps to indicate that your Silver
Monkey Tag Card is powered off.
Check For Updates
To use the Apple Find My app to locate this item, the latest version of
iOS, iPadOS, or macOS is recommended. The Find Items app on Apple Watch
requires the latest version of watchOS.
Add Your Silver Monkey Tag Card
Start The App, Open Find My app on your supported iPhone. Turn on the
bluetooth and network of your phone.
Connect Your Silver Monkey Tag Card
Press the switch on/off button once to power on your Silver Monkey Tag
Card, then “Add Other Item”, Once your Silver Monkey Tag Card is located, tap
“connect”, Enter a name and choose an emoji for your Silver Monkey Tag Card
and tap “Continue”. Find My will ask for confirmation to your Apple ID, Tap
“Agree” and “Finish”, then your Silver Monkey Tag Card will be set up and
ready to be used.
Find Silver Monkey Tag Card When It’s Nearby
Open Find My app and select the “Items” tab or open the Find Items app on
your Apple Watch. Tap your item from the list. Tap “Play Sound” to make your
Silver Monkey Tag Card beep. Tap “Stop Sound” to stop the beeps once you find
it.
Find Silver Monkey Tag Card Location
Open Find My app and select the ‘Items’ tab or open the Find Items app on
your Apple Watch. Tap your Silver Monkey Tag Card from the list. Your Silver
Monkey Tag Card location will appear on the Map with a time stamp of when the
item was located. To navigate to the Silver Monkey Tag’s Card location, tap
“Directions” to open Apple Maps.
Notifications
Enable “Notify When Left Behind”. Open Find My app and select the “Items”
tab or open the Find Items app on your Apple Watch. Tap on your item from the
list. Under “Notifications”, enable the “Notify When Left Behind” toggle. You
will receive a notification when you leave your Silver Monkey Tag Card behind
and it’s no longer in range of your device.
Enable “Notify When Found”
Under “Notifications”, enable the “Notify When Found toggle. When your
Silver Monkey Tag Card is seen by another Find My network device, you will
receive a notification of its location.
Note: “Notify When Found’ can only be activated when your Silver Monkey Tag
Card is out of range.
When Your Silver Monkey Tag Card Is Lost / Enabling “Lost Mode” Open Find
My app and select the “Items” tab or open the Find Items app on your Apple
Watch. Tap on your item from the list. Under “Lost Mode” tap “Enable”. A
screen detailing Lost Mode will pop up, tap “Continue”. Enter your phone
number or email address and tap “Next” You may enter a message that will be
shared with the person that finds your item. You can configure the Silver
Monkey Tag Card to allow others to access your contact information by tapping
the card with an NFC-enabled smartphone — this uses the same technology that
enables mobile payments. Tap “Activate” to enable “Lost Mode”
Note: When “Lost Mode” is enabled, “Notify When Found” is auto- matically
enabled.
Note: When” Lost Mode” is enabled, your Silver Monkey Tag Card is locked
and cannot be paired to a new device.
Resetting Silver Monkey Tag Card
Remove The Silver Monkey Tag Card From Find My App. Open Find My app and
select the “Items” tab. Tap on your item from the list. Please ensure “Lost
Mode” is disabled. Scroll to the bottom of the screen and tap “Remove Item”. A
summary will open, tap “Remove” to confirm.
Factory Reset Your Silver Monkey Tag Card
After successfully removing the Silver Monkey Tag Card from Find My app.
Press the Silver Monkey Tag’s Card switch on/off button five times rapidly and
then hold it a fifth time until you hear a beep. The Silver Monkey Tag Card is
now reset and ready to be paired to anew Apple ID/iOS device.
Unwanted tracking
If any Find My network accessory separated from its owner is seen moving
with you over time, you’ll be notified, Find My will send a notification to
your Apple devices. This feature is available on iOS or iPadOS 14.5 or later.
This features were created specifically to discourage people from trying to
track you without your knowledge.
Battery
The Tag Card utilizes a built-in rechargeable battery. It is charged using a
wireless charger (not included).
Charging the battery
- Place the Silver Monkey Tag Card on the charging spot. Ensure that the Tag Card is centered on the charger with the icon facing down.
- The light will start flashing green when charging begins. If not, make sure that the Tag Card is properly positioned.
- Once the Tag Card is fully charged, the light will turn solid green.
**Light indicator
**
| Switch ON/OFF | White light flashes once |
|---|---|
| Wireless Charging | Green light keeps flashing |
| Full charged | Green light keeps on |
| Reset | White light flashes once |
Button and sound description
| Power on | Click the button (long beep) |
|---|---|
| Power Off | Hold the button for 5 seconds (2-time beep) |
| Reset | Click the button 5 times then hold it untill there is a long beep |
(please remove SM Tag from your “Find My” App before reset it)
Remove Item| Press “Remove Item” in the App (long beep)
Play sound| Press “Play Sound” in the App (13-time beep)
Specification
SMA232
Working temperature| -20 – + 60°C
Bluetooth range| Up to 100 m
Working time| 4-6months
Compatibility| Bluetooth 5.2 / iOS 14.3 or higher
Waterproof| IPX67
Battery| Rechargeable battery
Battery capacity| 180 mAh
Wireless charging| 5W
Material| Tempered glass + zinc alloy
Apple certification| Yes — Find My
Dimension| 85 mm x 54mm x 2.6mm
**Warranty and technical support
**
Your product is covered by a 24-month manufacturer’s warranty.
For more information go to
www.silvermonkey.com/support.
If you have questions about using the product — contact us at
kontakt@silvermonkey.com.
Manufacturer: Silver Monkey sp. z 0.0., ul. Twarda 18, 00-105 Warszawa,
Poland.
Disposal and the EU compliance statement
We, as the manufacturer of this equipment, declare that it meets the rules of
the appropriate EU directives. If you need a copy of the EU Declaration of
Conformity — contact us.
Do not throw this equipment out with other household waste. This equipment is
made from materials that may be harmful to the environment and human health,
if the product is disposed of in the wrong way. When you need to throw away an
old product, take it to a designated collection point.
To use the Find My app by Apple to locate this iter, it is recommen- ded to
have the latest version of iOS, iPadOS, or macOS installed. The Find Items app
on Apple Watch requires the latest version of watchOs.
Use of the “Works with Apple Find My” badge means that a product has been
designed to work specifically with the technology identified in the badge and
has been certified by th e product manufacturer to meet Apple Find My network
product specifications and requirements. Apple is not responsible for the
operation of this device or use of this product or its compliance with safety
and regulatory standards.
The Apple Find My network provides an easy, secure way to locate compatible
personal items using the Find My app on your iPhone, iPad, Mac, iPod touch, or
the Find Items app on Apple Watch.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>