GAS AUDIO POWER S2-8D2 Component Subwoofers User Manual
- June 3, 2024
- GAS AUDIO POWER
Table of Contents
MAD
32
S2-802
MADE TO PLAY LOUD
S2-8D2 Component Subwoofers
WE PYAY LOUD !!
We know what ye want. You want] LOUD, and that is exactly what we do, what we
lij for. Vibrations, gut-punches and Straight up loud, usic – that’s what (
makes us/tick. We won’t dress uin f.!ncy words or claim be something we’re
nylt. We are the NO sue caraualo brand’ , [hf( lEvery single product with the
GASlolunit is born out of passion, the same that has dri@en us for two
generations and that will keep s rolljhg up to your neighbourhood, winning and
pushing the limits for many generations to come!
It’s up to you to choose your own level of loud, and if you don’t like what we
do that’s OK. You are welcome back when you’ve had your first true GAS
experience. We don’t exclude, we don’t judge and we do not make up any excuses
for who we are. We are GAS and we are proud to be LOUD!
SAFETY
PLAY LOUD but play safe. Read through this information, follow the
instructions and save the manual for future usage and reference.
Make sure to pay attention to the instructions when you see this symbol:
Do not expose your new subwoofer to excessive damp or moisture. If the
subwoofer is exposed it might result in electric failure, shock or damage to
the product. Servicing is required when the product has been damaged in any
way and/or doesn’t operate normally. Refer all servicing to qualified service
personnel only. Keep the cables inside the vehicle separate from sharp edges
or components that may be affected or take damage. Follow the recommended
cable sizes and always use high quality cables and accessories. Even if you’re
eager to put the subwoofer to use – take no shortcuts when installing the
cables, make sure that all connectors are
protected and secured.
Do not drill any holes without checking what lies beneath, and don’t cut
anything without making sure that no important components risk being damaged.
There is a first time for everything, if you need help – ask a friend or
contact your local
GAS AUDIO POWER dealer/installer.
We want you to experience your product’s MAD sound, but we don’t want you to
injure yourself or others. Use common sense, respect high pressure levels and
volume, and
follow your local laws and regulations.
UNPACKING
Unboxing your new MAD product is an experience, make sure that the subwoofer
and all the accessories are included in the packaging:
DIMENSIONS
SPECIFICATIONS
Below you’ll find the specifications that has been checked and tested in our
workshop. The specified sensitivity isn’t directly connected with the sound
pressure in the vehicle, and shouldn’t be used as the sole indicator for
comparison with other subwoofers.
MAD S2-802
Component | Subwoofer |
---|---|
Size | 8″(200 mm) |
Nominal Impedance | 2+2 Ohm |
Power RMS | 250 W |
Power MAX | 500 W |
Freq. response | 25-250 Hz |
Voice Coil | 2″(51 mm) PCW |
Cone | IMPP |
Dustcap | 3D IMPP |
Basket | M Steel |
Magnet | HO Ferrite |
Suspension | USG Rubber |
Weight | 3.2 KG |
PERFORMANCE
THIELE/SMALL PARAMETERS
S2-8D2 | S2-8D2 |
---|---|
Impedance | 2+2 Ohm |
Re | 3.6 Ohm |
Fs | 33 Hz |
Oms | 6. |
Oes | 0.47 |
Ots | 0.43 |
Vas | 28.2 L |
IMPEDANCE VS FREQUENCY
FEATURES
The MAD subwoofers are made to be LOUD and last for years to come. Those
awesome vibrations are what drives us to create impressive subwoofers. We want
to help you and your vehicle to be as LOUD as possible. We’ve made sure that
is the case by using innovative and groundbreaking techniques that increase
durability.
THE ESSENCE OF THUNDER
A robust, rigid and durable cone made by injection molded polypropylene (IMPP)
that withstands the toughest resonance and membrane break-up. Provide it with
raw power and you will be awarded!
USG™ CONSTRUCTION
The USG™ (Unity Surround & Gasket) construction around the cone optimizes the
linear movement and cone displacement area, all to give you the extra edge in
accuracy and provi de an awesome musical performance.
DVS™ VENTILATION SYSTEM
If you like it LOUD, proper cooling is key. We implemented the subwoofer with
a DVS”(Dual Ventilation System) for reduced distortion and increased heat
dissipation. Are you ready to push the MAD S2-8D2 to the limit? The
incorporated woven tinsel leads avoid annoying pop sounds and improves
durability!
FIERCE DESIGN AND DUAL PCW VOICE COIL
To match its awesome sound, the subwoofer got an industrial and rugged MAD
shaped steel basket that endures the toughest conditions. The dual 2+2 Ohm
51mm voice coil is made of PCW (Pure Copper Wire) and the dust cap is, like
the cone, made of IMPP for a unique 3D design that will make your friends
jealous and keep the haters away! Walk tall and cruise with pride!
HOWTO
INSTALL SUBWOOFER
Before installing your brand new subwoofer, make sure that you have everything
you need.
Have the right tools ready, and make sure that you have the necessary
knowledge/skill to perform the installation properly. Preparation and
knowledge is crucial!
The MAD S2-8D2 uses dual 2 ohm voice coils. If you want to connect two or more
S2 series subwoofers, you can vary the impedance by altering the wiring
configuration to use a series, parallel or series-parallel setup. The more the
merrier!
Make sure to look through the recommended wiring schematics below and choose
the setup that corresponds with the number of subwoofers in your sound system.
Take note of the impedance stability of your amplifier. Don’t be afraid to
consult your local GAS AUDIO POWER dealer/installer if you have any questions.
It is important to [E know the limits of your amplifier. Be sure to
connect your sound system with a suitable impedance to optimize your sound
system.
BUILD ENCLOSURE
If you want a LOUD and awesome looking sound system, you should mount your MAD
subwoofer in an enclosure. Here’s information about optimized volumes for
different types of enclosures and how they perform with the MAD S2 subwoofer.
If you feel unsure about how to build an enclosure on your own, consult a
local GAS AUDIO POWER dealer/installer.
MAD S2-8D2:
VOLUME
SEALED 9L| F3
64Hz| OTC
0.679| FB
x| PORT
x| LENGTH
x| BANDWIDTH
x
---|---|---|---|---|---|---
VENTED 19L| 40Hz| x| 42Hz| 1×3″ (70mm)| 346mm| x
VENTED 32L| 37.7Hz| x| 44.5Hz| 1×4″ (104mm)| 400mm| x
4TH ORDER SEALED 15L
BANDPASS VENTED 19.5L| x| x| 58Hz| 1×3″ (70mm)| 154mm| (-3dB) 42Hz-79Hz
***** Driver displacement volume included
DO I NEED POLYFILL?
Hell yeah! We recommend using polyfill for all sealed, vented and bandpass
enclosures for the best overall performance.
A polyfilled enclosure will bring out the full potential of your subwoofer, by
starting an isothermal process when energy flows through the fibers (very
scientific). This means that the air gets more dense, so it lessens the BOOM
and brings out the BASS! It can also reduce harmonic distortion. Sounds
complicated, we know. But it’s easy to do! Cover two sides in a ported
enclosure or make a loose polyfill ball behind the driver in a sealed
enclosure. Try it out! If you like the bass to hit harder- just take away
some. Do you want to lessen the effect? Put in some more.
TROUBLESHOOTING
NO POWER/SOUND
Check the subwoofer to make sure it isn’t damaged. If your subwoofer doesn’t
get any power, the most common issue is either in the wiring or in the
amplifier. Use a ultimeter to measure the amplifier’s voltage on the+ 12V
terminal and the remote signal terminal. Use a multimeter to make sure that
you have a negative ground connection. heck the built-in fuse (if there’s
one) on the amplifier. If there’s no power coming through – control the fuse
on the power cable. If this is intact – make a full check of the wiring to
ensure cable integrity. MAD S2-8D2 is a dual voice coil subwoofer with dual
connection terminals. Check the wiring of the coils. If several woofers and
coils are wired in parallel! the impedance will be too low for the connected
amplifier to handle. This can make the amplifier go into protect mode with no
sound as a result. Follow the wiring schematics on page 8. Check all the
speakers connected to your sound system. Check all the speaker cables and all
the signal cables. Check your head unit to make sure no settings are limiting
the amplifier’s functions or the subwoofer. When all of the above has been
tested/looked over, and all is as it should be but there’s still no sound,
consult your local GAS dealer.
UNWANTED NOISE
Start by looking over the subwoofer and other speakers in the sound system so
there is no damage or connection issue with the wiring. Make sure that your
signal cables or speaker cables aren’t too close to the power cables. Check
your amplifier’s grounding point and make sure that the surface is clean. When
all of the above has been tested/looked over, and the unwanted noise does not
vanish, consult your local GAS dealer
DISTORTION
Start by looking over the subwoofer and other speakers in the sound system so
there’s no damage or connection issue with the wiring. Check the speaker
cables to make sure that the polarity isn’t reversed on one channel. Check
the settings on the amplifier, make sure that the gain/level is set according
to the amplifier’s instructions. If your amplifier has a boost function, lower
its effect or turn it off.
WARRANTY & DISPOSAL
This product is covered by warranty, depending on the conditions in the
country where it’s sold. If the subwoofer is returned for service, please
include the original dated receipt (or a copy) with the product. Make sure
that the subwoofer is packaged properly and secured, preferably in its
original packaging.
**** The crossed-out wheelie bin symbol means that the product, literature
and packaging included must be taken to separate collection at the end of
their working life. Don’t dispose of these products as unsorted municipal
waste: take them for recycling. For info on your nearest recycling point,
check with your local waste authority.
This product has been granted with the CE certification mark to show that the
product follows the health, safety, and environmental protection standards for
products sold within the European Economic Area (EEA).
GAS Audio Power products comply with the relevant pro visions of the RoHS
Directive for the European Union. In common with all Electrical and Electronic
Equipment (EEE) the product shouldn’t be disposed of as household waste.
Alternative arrangements may apply in other jurisdictions.
GAS Audio Power is a global partner of the European Mobile Media Association,
an organization that focus on promoting the custom made mobile media
installations to consumers.
THE GAS WORLD
You’ve entered the world of GAS. We aim to please, and we’ve made sure to have
products made for you. No matter what stage of the LOUD-addiction you might
find yourself in, there is a GAS product to fill your need.
MAD Just starting out? The MAD series is made to play LOUD and to be the
express lane to a no bullsh!t sound system that will make sure everyone can
hear you coming!
MAX The MAX series holds products made to deserve the center stage.
Powerful, heavy duty and designed to be noticed. We made NO COMPROMISES
because we know
that you wouldn’t accept it.
CMP The CMP series has been developed for the crucial seconds when the
dB-counter starts to tick. All CMP products have hand-picked, high quality,
COMPETITION GRADE components and they are specially designed to withstand an
awesome amount of power.
THANKS FOR JOINING GAS AUDIO POWER!
GAS
AUDIO POWER and SHAKY are registered trademarks by Winn Scandinavia AB and is
protected by relevant laws and jurisdictions such as Copyright and Trademark
laws. Winn Scandinavia AB I Elementv~gen 15, 70227~rebro, Sweden I
www.winnscandinavia.com
Winn Scandinavia AB reserves for possible typos, factual or numeric errors
that may have been printed on any products,
package designs, user manuals and/or other included accessories.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>