GAS AUDIO POWER MAX B1-16 Hardcore Car Audio User Manual
- June 12, 2024
- GAS AUDIO POWER
Table of Contents
MAX User Manual
B 1- 16/ B1-18
HARDCORE CAR AUDIO
MAX B1-16 Hardcore Car Audio
WE PLAY LOUD!!
We know what you want. You want it LOUD, and that ,is exactly what we do, what
we live for. Vibrations, / gut-punch s and straight up loud music – that’s
what makes u tick. We won’t dress up in fancy words or claim be something
we’re not. We are the NO udio brand!
Every single product with the GAS logo on it is born out of passion, the same
that has driven us for two generations and that will keep us rolling up to
your neighbourhood, winning and pushing the limits for many generations to
come!
It’s up to you to choose your own level of loud, and if you don’t like what we
do that’s OK. You are welcome back when you’ve had your first true GAS
experience. We don’t exclude, we don’t judge and we do not make up any excuses
for who we are.
We are GAS and we are proud to be LOUD!
SAFETY
PLAY LOUD & SAFE. Read through this information, follow the instructions and
save the manual for future usage and reference.
Make sure to pay attention to the instructions when you see this symbol:
Do not expose your new loaded enclosure to excessive damp or moisture. If the
enclosure/subwoofer is exposed it might result in electric failure, shock or
damage to the product. Servicing is required when the product has been damaged
in any way and/or doesn’t operate normally. Refer all servicing to qualified
service personnel only.
Keep the cables inside the vehicle separate from sharp edges or components
that may be affected or take damage. Follow the recommended cable sizes and
always use high quality cables and accessories. Even if you’re eager to put
the enclosure to use – take no shortcuts when installing the cables, make sure
that all connectors are protected and secured.
Do not drill any holes without checking what lies beneath, and don’t cut
anything without making sure that no important components risk being damaged.
To avoid potential injury from enclosure movements, the pre-loaded enclosure
must be securely fastened in the vehicle on a suitable location.
There is a first time for everything, if you need help – ask a friend or
contact your local GAS AUDIO POWER dealer/installer.
We want you to experience your product’s MAD sound, but we don’t want you to
injure yourself or others. Use common sense, respect high pressure levels and
volume, and follow your local laws and regulations.
UNPACKING
Unboxing your new MAX product is an experience, make sure that the enclosure and all the accessories are included in the packaging:
DIMENSIONS
| A| B| C| D|
---|---|---|---|---|---
B1-16| 420| 280| 148| 188| mm
B10-18| 480| 330| 168| 208| mm
SPECIFICATIONS
Below you’ll find the specifications that has been checked and tested in our workshop. The specifications aren’t directly connected with the sound pressure in the vehicle, and shouldn’t be used as the sole indicator for comparison with other enclosures. The MAX B1 enclosures are loaded with custom made subwoofers (see product specifications below).
MAX Bi1-16
Component | Pre-loaded Enclosure |
---|---|
Size | 1×6.5″(165mm) |
Nominal Impedance | 2+2Ohm |
Power RMS | 400W |
Power MAX | 800W |
Volume | 103L |
Weight | 9.1KG |
MAX B1-16SW
Component | Subwoofer |
---|---|
Size | 6.5″(165mm) |
Nominal Impedance | 2+2 Ohm |
Power RMS | 400W |
Power MAX | 800W |
Freq. response | 30-200Hz |
Voice coil | Dual 2″ PCW |
Voice coil former | Aluminum |
Cone | Non-Pressed Paper |
Dustcap | 3D IMPP |
Basket | HD steel |
Magnet | HQ Ferrite 2x300z |
Suspension | High roll foam w. stitch |
Tinsel | Dual silver coated leads |
MAX Bi1-18
Component | Pre-loaded Enclosure |
---|---|
Size | 1×8″(200mm) |
Nominal Impedance | 2+2 0hm |
Power RMS | 500W |
Power MAX | 1000w |
Volume | 17L |
Weight | 11.3KG |
MAX B1-18SW
Component | Subwoofer |
---|---|
Size | 8″(200mm) |
Nominal Impedance | 2+2 Ohm |
Power RMS | 500W |
Power MAX | 1000w |
Freq. response | 25-200Hz |
Voice coil | Dual 2.5″ PCW |
Voice coil former | Aluminum |
Cone | Non-Pressed Paper |
Dustcap | 3D IMPP |
Basket | HD steel |
Magnet | HQ Ferrite 2x560z |
Suspension | High roll foam w. stitch |
Tinsel | Dual silver coated leads |
FEATURES
ALL YOU NEED AND MORE
Are you ready to unleash the full power of your car’s audio system? This is
the GAS MAX B1-16/18, a custom enclosure fitted with a custom-made subwoofer
based on the awesome MAX S1series subwoofer. Designed for the hardcore bass
heads out there, this is an enclosure that perfectly balances awesome power,
weight, and musicality.
PRECISION CAR AUDIO
You know as well as we do that it takes more than a good subwoofer to get an
awesome sound system, you need a great enclosure too. The MAX Bl enclosure has
an optimized high output airflow slot port design that makes sure you get a
more immersive listening experience with its enhanced extension and response.
We have also included custom feet with the MAX B1 series enclosure, which lets
you point the subwoofer downwards. This feature is perfect for those that want
to squeeze every possible dB out of the enclosure!
MAXIMUM BASS
The enclosure is loaded with a custom-made subwoofer that was inspired by the
MAX S1 subwoofer series. This woofer will show everyone that your audio
dedication is real. With a rigid and durable cone made by non-pressed paper
with Mica minerals, dual stitching (on the B1-18) and an impressive high roll
foam suspension, you’ll experience awesome cone movement and musicality like
never before. The subwoofer has dual stacked HQ ferrite magnets, excellent
cooling, a Nomex spider and an HD steel basket to make sure that your sound
system will be the last thing standing.
NO COMPROMISE
There is no shortcut to get an awesome sound system. The MAX B1 series is made
to push your car audio system to its limit. Its strong and durable enclosure
will resist all the heavy vibrations and resonances it might face, and the
stylish pre-mounted A-star grille will make sure the subwoofer is secure. The
black edition dual push terminals and the included jump cables offer you a
smooth and high-performing installation with easy impedance optimization. Show
everyone that you’ve reached the next level, the MAX level, of car audio.
HOW TO
INSTALL PRE-LOADED ENCLOSURE
Before installing your brand new pre-loaded enclosure, make sure that you have
everything you need. Have the right tools ready, and make sure that you have
the necessary knowledge/skill to perform the installation properly.
Preparation and knowledge is crucial!
The pre-loaded subwoofers in the MAX B1-16/B1-18 enclosures use double 2 Ohm
voice coils. Since the enclosure is pre-loaded with a custom made MAX
subwoofer, the installation is very simple. Just connect it with your
amplifier and get ready for an awesome bass experience!
The MAX B1 enclosures have 2+2 Ohm impedance as its standard configuration,
but it can be adjusted to 1or 4 Ohm. It is important to know the limits of
your amplifier to optimize its performance. You can vary the impedance by
altering the wiring configurations by using the included jump jables. Choose
the wiring diagram below that corresponds to the impedance stability of your
amplifier.
INSTALL PRE-LOADED ENCLOSURE
In the MAX B1 enclosure’s packaging we have included special designed feet. By
mounting the feet on the enclosure you can aim the subwoofer downwards or in
any other direction you prefer.
Locate the included feet and included screws in the enclosures packaging. Place the feet in the front corners of the enclosure. Place the screws through the hole on the feet and screw them tightly to lock the feet into place on the enclosure (see illustration below). If you want to, you can pre-drill holes in the enclosure for the screws with a 3mm bit.
To make sure that the enclosure doesn’t move around while you’re driving, we recommend fastening the enclosure in the vehicle. One alternative is to use mounting brackets and screws to securely fasten it in position.
Mount one bracket on each side of the enclosure.
NOTE! These accessories are not included in the enclosure’s packaging.
TROUBLESHOOTING
NO POWER/SOUND
Check the enclosure/subwoofer to make sure it isn’t damaged. If your pre-
loaded enclosure doesn’t get any power, the most common issue is either in the
wiring or in the amplifier. Use a multimeter to measure the amplifier’s
voltage on the +12V terminal and the remote signal terminal. Make sure that
you have a negative ground connection. Check the built-in fuse (if there is
one) on the amplifier. If there’s no power coming through – control the fuse
on the power cable. If the fuse is intact you should check all of the wiring
to ensure cable integrity.
DISTORTION
Start by looking over the enclosure/subwoofer so there’s no damage or
connection issue with the wiring. Check the speaker cables to make sure that
the polarity isn’t reversed on one channel. Check the settings on the
amplifier, make sure that the gain/level function is set according to the
amplifier’s instructions. If your amplifier has a boost function, lower its
effect or turn it off.
When all of the above has been tested/looked over, and all is as it should be
but the preloaded enclosure still has no power/sound or other problems,
consult your local GAS AUDIO POWER dealer/installer
WARRANTY & DISPOSAL
This product is covered by warranty, depending on the conditions in the country where it’s sold. If the pre-loaded enclosure is returned for service, please include the original dated receipt (or a copy) with the product. Make sure that the enclosure is packaged properly and secured, preferably in its original packaging.
| The crossed-out wheelie bin symbol means that the product, literature and
packaging included must be taken to separate collection at the end of their
working life. Don’t dispose of these products as unsorted municipal waste:
take them for recycling. For info on your nearest recycling point, check with
your local waste authority.
---|---
****| This product has been granted with the CE certification mark to show
that the product follows the health, safety, and environmental protection
standards for products sold within the European Economic Area (EEA).
| 6AS Audio Power products comply with the relevant pro- visions of the RoHS
Directive for the European Union. In common with all Electrical and Electronic
Equipment (EEE) the product shouldn’t be disposed of as household waste.
Alternative arrangements may apply in other jurisdictions.
| GAS Audio Power is a global partner of the European Mobile Media
Association, an organization that focus on promoting the custom mode mobile
media installations to consumers
THE GAS WORLD
You’ve entered the world of GAS. We aim to please, and we’ve made sure to have products made for you. No matter what stage of the LOUD-addiction you might find yourself in, there is a GAS product to fill your need.
| Just starting out? The MAD series is made to play LOUD and to be the express
lane to a no bullsh!t sound system that will make sure everyone can hear you
coming!
---|---
| The MAX series holds products made to deserve the center stage. Powerful,
heavy duty and designed to be noticed. We made NO COMPROMISES because we know
that you wouldn’t accept it.
| The CMP series has been developed for the crucial seconds when the dB-
counter starts to tick. All CMP products have hand-picked, high quality,
COMPETITION
GRADE components and they are specially designed to withstand an awesome
amount of power.
THANKS FOR JOINING GAS AUDIO POWER!
GAS AUDIO POWER and SHAKY are registered trademarks by Winn Scandinavia AB and
is protected by relevant laws and jurisdictions such as Copyright and
Trademark laws.
Winn Scandinavia AB
| Elementvagen 16, 70227 Grebro, Sweden
| www.winnscandinavia.com
Winn Scandinavia AB reserves for possible typos, factual or numeric errors
that may have been printed on any products, package designs, user manuals
and/or other included accessories.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>