Y-Desk Electric Height Adjustable Desk Frame User Guide

June 7, 2024
Y-Desk

Y-Desk Electric Height Adjustable Desk Frame User Guide
Y-Desk Electric Height Adjustable Desk Frame

Overview

Y-Desk Electric Height Adjustable Desk Frame

  1. left leg 1pcs
    Required Items

  2. Right leg 1pcs
    Required Items

  3. Long tube 1pcs
    Required Items

  4. Side frame 2pcs
    Required Items

  5. hex bar 1pcs
    Required Items

  6. base 2pcs

  7. Power Cord 1pcs

  8. Power Supply 1pcs
    Required Items

  9. Handset 1pcs

  • M8*10(10pcs)
    Required Items

  • M8*20(2pcs)

  • M8(2pcs)
    Required Items

  • ST4.2*16(2pcs)

  • ST5.0*16(6pcs) for desktop(optional)

  • M5
    Required Items

  • M4
    Required Items

  • M2.5

  • (optional)
    Required Items

Installation instruction

Installation instruction
Installation instruction
Installation instruction
Installation instruction
Installation instruction
Installation instruction
Installation instruction
Installation instruction

Handset Instruction

Handset Instruction

The whole handset surface is a button panel. If there is no press within 30 seconds, the screen is locked and M1/M2/M3/M4 keys are locked correspondingly, you should press Up or Down key first, it can be used when the display screen light up.

Up or Down Key
To adjust the height of the desk, keep pressing on “up” or “down” until it fits your best position.

Display screen
Display the height value of the desk.

Memory Key (M1/ M2/ M3/ M4)

After setting memory keys, the desk can lift automatically to memory height.

  • How to set memory mode.
    Please keep pressing M1/M2/M3/M4 key for 5 seconds, until “be” sound, the memory height is successfully saved. Then press M1/M2/M3/M4, the desk moves to memory height automatically.

Safety function
When the desktop is on the rise or down, encountered reverse resistance, the desk will rebound.

Setting solution for desk function

Setting solution for desk function

Handset shows error code and solution

Error code

|

Fault cause

|

Solution

---|---|---

ER1

|

Motor stop

| Power off and restart. If fault still exists, it is motor problem.

ER5

|

Overload protection

| Legs load>120kg, display ER5. Lighten loads, power off and restart.

Hot

|

Continuous operation for 2 to 5 minutes.

| Power protection, automatic recovery after ten minutes with power on.

Specifications

Electric Control Part:

  • Input Voltage: 100-240V can be use
  • Output Voltage: 29V DC 1.8A
  • Duty cycle: 10%MAX 2min on 18 min off Switch power supply,low energy consumtion Manual device can move and long press

Desk frame part:

  • built-in limit switch
  • Dynamic load: 80KG
  • The maximum static load: 100KG
  • Load   speed: 30mm/s

Safety and warnings

This appliance can be used by children aged from 8 years and above and persons with reduced physical,sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.Children shall not play with the appliance.Cleaning and user maintenance shall not be made by children without supervision.

Correct Disposal of this product

Dustbin Icon
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal ,recycle it responsibly to promote the sustainable reuse of material resources.To return your used device,please use the return and collection systems or contact the retailer where the product was purchased.They can take this product for environmental safe recycling.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals