Munters Hanging Turkey Scale User Manual
- June 7, 2024
- Munters
Table of Contents
RBS 1TH
Manual for use and maintenance
RBS 1 TH
Hanging Turkey Scale
Ag/MIS/ImEn-2702-02/19 Rev 1.0
P/N: 110409 Rev 1.0
RBS 1 TH
Manual for use and maintenance
Rev 1.0; 03/2019
Ag/MIS/ImEn-2702-02/19 Rev 1.4 (MIS)
This manual for use and maintenance is an integral part of the apparatus together with the attached technical documentation.
This document is destined for the user of the apparatus: it may not be
reproduced in whole or in part, committed to computer memory as a file or
delivered to third parties without the prior authorization of the assembler of
the system.
Munters reserves the right to effect modifications to the apparatus in
accordance with technical and legal developments.
2
1 Introduction
1.1 Disclaimer
Munters reserves the right to make alterations to specifications, quantities, dimensions etc. for production or other reasons, subsequent to publication. The information contained herein has been prepared by qualified experts within Munters. While we believe the information is accurate and complete, we make no warranty or representation for any particular purposes. The information is offered in good faith and with the understanding that any use of the units or accessories in breach of the directions and warnings in this document is at the sole discretion and risk of the user.
1.2 Introduction
Congratulations on your excellent choice of purchasing an RBS-1 TH!
In order to realize the full benefit from this product it is important that it
is installed, commissioned and operated correctly. Before installation or
using the fan, this manual should be studied carefully. It is also recommended
that it is kept safely for future reference. The manual is intended as a
reference for installation, commissioning and day-to-day operation of the
Munters Controllers.
1.3 Notes
Date of release: July 2010
Munters cannot guarantee to inform users about the changes or to distribute
new manuals to them. All rights reserved. No part of this manual may be
reproduced in any manner whatsoever without the expressed written permission
of Munters. The contents of this manual are subject to change without notice.
4
2 Parts list
- One scale platform
- One metal cross
- Four metal hanging cables
- One shackle
- One load cell
- Four L shape frame bars + split pins
- Four safety pins
5
3 Instructions
1. Connect the four L shaped bars to the scale platform as follows:
a. Thread the four hanging metal cables from the bottom side of the four frame bars (the bottom side is the side with the split pins) right up to the corner of the bar (Figure 1).
→ Bottom side
Figure 1
b. Insert each bar to the holes on the four corners of the scale platform and
use the safety pin to secure the bars in place.
c. Start with the first bar on any corner (Figure 2)
Figure 2
d. Continue with the second bar on the opposite side of the scale platform (Figure 3 and Figure 4) and use the metal cross to connect the two bars in the middle.
6
Figure 3 Figure 4
e. Connect bars 3 and 4 in the same manner (Figure 5 and Figure 6).
CAUTION Do not forget to use the safety pins!
Figure 5 Figure 6
f. Thread the hanging cables and the load cell on to the shackle and screw tightly.
7
2. Place a hook measuring approximately 2.40 meter/7.3 feet above the ground.
If possible make it height-adjustable for changes in flock growth.
3. Hang the load cell in place.
4. The scale platform has a 3/8″ hole for a pole that will prevent platform
swinging.
CAUTION Insert the pole only after the scale is in place.
8
4 Environmental Protection
Recycle raw materials instead of disposing as waste. The controller, accessories and packaging should be sorted for environmental-friendly recycling. The plastic components are labeled for categorized recycling.
9
5 Warranty
Warranty and technical assistance
Munters products are designed and built to provide reliable and satisfactory
performance but cannot be guaranteed free of faults; although they are
reliable products they can develop unforeseenable defects and the user must
take this into account and arrange adequate emergency or alarm systems if
failure to operate could cause damage to the articles for which the Munters
plant was required: if this is not done, the user is fully responsible for the
damage which they could suffer.
Munters extends this limited warranty to the first purchaser and guarantees
its products to be free from defects originating in manufacture or materials
for one year from the date of delivery, provided that suitable transport,
storage, installation and maintenance terms are complied with. The warranty
does not apply if the products have been repaired without express
authorisation from Munters, or repaired in such a way that, in Munters’
judgement, their performance and reliability have been impaired, or
incorrectly installed, or subjected to improper use. The user accepts total
responsibility for incorrect use of the products.
The warranty on products from outside suppliers fitted to the RBS 1 TH, (for
example antennas, power supplies, cables, etc.) is limited to the conditions
stated by the supplier: all claims must be made in writing within eight days
of the discovery of the defect and within 12 months of the delivery of the
defective product. Munters has thirty days from the date of receipt in which
to take action, and has the right to examine the product at the customer’s
premises or at its own plant (carriage cost to be borne by the customer).
Munters at its sole discretion has the option of replacing or repairing, free
of charge, products which it considers defective, and will arrange for their
despatch back to the customer carriage paid. In the case of faulty parts of
small commercial value which are widely available (such as bolts, etc.) for
urgent despatch, where the cost of carriage would exceed the value of the
parts, Munters may authorise the customer exclusively to purchase the
replacement parts locally; Munters will reimburse the value of the product at
its cost price.
Munters will not be liable for costs incurred in demounting the defective
part, or the time required to travel to site and the associated travel costs.
No agent, employee or dealer is authorised to give any further guarantees or
to accept any other liability on Munters’ behalf in connection with other
Munters products, except in writing with the signature of one of the Company’s
Managers.
WARNING: In the interests of improving the quality of its products and services, Munters reserves the right at any time and without prior notice to alter the specifications in this manual.
The liability of the manufacturer Munters ceases in the event of:
- dismantling the safety devices;
- use of unauthorised materials;
- inadequate maintenance;
- use of non-original spare parts and accessories.
Barring specific contractual terms, the following are directly at the user’s expense:
10
- preparing installation sites;
- providing an electricity supply (including the protective equipotential bonding (PE) conductor, in accordance with CEI EN 60204-1, paragraph 8.2), for correctly connecting the equipment to the mains electricity supply;
- providing ancillary services appropriate to the requirements of the plant on the basis of the information supplied with regard to installation;
- tools and consumables required for fitting and installation;
- lubricants necessary for commissioning and maintenance.
It is mandatory to purchase and use only original spare parts or those
recommended by the manufacturer. Dismantling and assembly must be performed by
qualified technicians and according to the manufacturer’s instructions.
The use of non-original spare parts or incorrect assembly exonerates the
manufacturer from all liability. Requests for technical assistance and spare
parts can be made directly to the nearest Munters office. A full list of
contact details can be found on the back page of this manual.
Munters Israel
18 HaSivim Street
Petach-Tikva 49517, Israel
Telephone: +972-3-920-6200
Fax: +972-3-924-9834
11
Australia Munters Pty Limited, Phone +61 2 8843 1594, Brazil Munters Brasil Industria e Comercio Ltda, Phone +55 41 3317 5050, Canada Munters Corporation Lansing, Phone +1 517 676 7070, China Munters Air Treatment Equipment (Beijing) Co. Ltd, Phone +86 10 80 481 121, Denmark Munters A/S, Phone +45 9862 3311, India Munters India, Phone +91 20 3052 2520, Indonesia Munters, Phone +62 818 739 235, Israel Munters Israel Phone +972-3-920-6200, Italy Munters Italy S.p.A., Chiusavecchia, Phone +39 0183 52 11, Japan Munters K.K., Phone +81 3 5970 0021, Korea Munters Korea Co. Ltd., Phone +82 2 761 8701, Mexico Munters Mexico, Phone +52 818 262 54 00, Singapore Munters Pte Ltd., Phone +65 744 6828, South Africa and Sub-Sahara Countries Munters (Pty) Ltd., Phone +27 11 997 2000, Spain Munters Spain S.A., Phone +34 91 640 09 02, Sweden Munters AB, Phone +46 8 626 63 00, Thailand Munters Co. Ltd., Phone +66 2 642 2670, Turkey Munters Form Endüstri Sistemleri A., Phone +90 322 231 1338, USA Munters Corporation Lansing, Phone +1 517 676 7070, Vietnam Munters Vietnam, Phone +84 8 3825 6838, Export & Other countries Munters Italy S.p.A., Chiusavecchia Phone +39 0183 52 11
g/MIS/ImEn-2702-02/19 Rev 1.0
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>