MOONS Intelligent indoor LED driver User Manual

MU050S150BQI201 Intelligent indoor LED driver

Features

• Input voltage: 100-277Vac ，140-388Vdc
• Built-in active PFC function 0.95 Typ.
• High efficiency: up to 87% Typ.
• Constant current, 2 channels output
• 2 channels 0-10V control
• 4 in 1:Tunable white(1500-6500K).Dim to warm(1500-3200K), Solo dimming, Dual dimming
• The output current can be set from 150~1500mA
• AUX output 12V,150mA
• Protection: OVP, SCP, OPP, OTP
• According to UL Class2、EN SELV
• 5-year warranty

Specification

Model (MU050S150BQI201 )|
---|---
| Efficiency(230Vac)| 87% (Typical) at 55V/0.911A load condition
Efficiency(120Vac)| 87% (Typical) at 55V/0.91A load condition
Voltage Range| 90-305Vac , 126-427Vdc
Rated Input Voltage| 100-277Vac , 140-388Vdc
Frequency Range (Hz)| 50/60
Power Factor| >0.9 at 100-277Vac 50/60Hz input, with 50%–100% load conditions
THD| < 20%, at 100 — 277Vac 50/60Hz input, with 50% — 100% load conditions
AC Current(Typ.)| 0.55A MAX at 120VAC , 0.3A MAX at 230VAC
Inrush Current(Typ.)| <10A at 100 –277Vac input 25t cold start at 100% conditions .for more details in the attached graph
Input Power (W)| 60(max)
Standby power (W)| <0.5W at input 120Vac, 230Vac
Leakage Current(max.)| 0.75mA at 277Vac 60Hz input
Output| Output Voltage Range (V)
,Note.1| 8-55
Output Current Range(mA)| 150-1500.Support hot plug, without overshoot current .
Rated Power (W)| 50(max)
Output channels| 2
Ripple Current| Output current 200-1500mA ripple LF(<120HZ) C 3 % Ripple = peak / average: ripple HF C 30 %
Current Tolerance| ±5%
Line Regulation| ±1%
Load Regulation| ±3%
Setup, Rise Time| <0.5S @120V/60HZ, 230V/50HZ
AUX output| 12V± 3% ,150mA max
Dimming Control| | Output current ..1mA
Isolated 0-10V dimming / 0.1%lo-100%lo ref. Dimming module diagram and dimming curve
Protection| Open circuit protection(V)| 60
Short Circuit| Power supply stops output, recovers automatically when fault condition removed
Over Power| Solo&Dual dimming the current drops by 5% per 100ms; Tunable white&Dim to warm each time drops 10%
Over Temperature| tc 10000 ± 10%. Hiccup mode,When the temperature of tc rise to 100t (Typ.)
Environment| Operating Temp.| -25—+65t ; tc 90t:
Operating Humidity| 20-95%RH, non-condensing
Storage Temp., Humidity| -40—+85°C, 10-95%RH
Vibration| 10-500Hz, 5G 12min/cycle, period for 72min each along X, Y, Z axis
Ingress Protection Rating| IP20
Safety & EMC| Safety Standard| UL8750, CSA C22.2 No.250.13-14, EN61347-1, EN61347-2-13
Isolation| Input| Output| Dimming interface| Enclosure|
Input| No applicable| 3.75KV| 3KV| 1.875KV|
Output| 3.75KV| No applicable| 500V| 1.5KV|
Dimming interface| 3KV| 500V| No applicable| 500V|
Enclosure| 1.875KV| 1.5KV| 500V| No applicable|
Isolation Resistance| I/P-0/P ,l/P-FG,0/P-FG:100M Ohms/500VDC/25°C/70%RH
EMC Emission| FCC Part 15 ClassB, EN55015, EN61000-3-2 Class C, EN61000-3-3
EMC Immunity| EN61000-4-2,3,4,5,6,8,11, EN61547 ( Surge L,N-FG 2KV. L-N 1KV) Additional suger test L,N-FG 2.5KV;L-N 2.5KV
Others| Life time| >50000 hours@Tc =75°C at 100% load conditions
MTBF| 300,000 hours, measured at full load, 25°C ambient temperature MIL-HDBK- 217F(25°C)
Dimension ( LxWxH )| 408 x 30 x 21 mm / 16.06 x 1.18 x 0.83 in
Weight| 420g
Note.1: refer to V/I curve

Curve

Derating Curve

Derating Curve

V/I Curve

PF VS. Load Curve

THD VS. Load Curve

Efficiency VS. Load Curve

0-10V dim Curve

Inrush current waveform

Inrush current information

Max number of drivers per MCB

Application of introduction

1. MCS interface(MCS+/MCS-)

• MCS+ interface voltage 15V
• Max current setting(each step is 1 mA), default driving current defined as 350mA.
• Log or linear dimming curve, the default setting is log dimming.
• NTC thermal management protects LED lamps, when the temperature of the LED lamp is over-temperature protection point, the current will be reduced by 50% every 5 minutes. The default setting is 85℃.

NTC compatibility

list

| NTC Manufacturer| NTC Model NO.
---|---|---
MURATA| NCP21WB473J03RA
VISHAY| NTCS0805e4473JXT
VISHAY| NTCLE100E3473

• Control the status of Auxiliary power when dim level =0. Enable standby mode: when dim level =0, the Auxiliary power will be closed. Disable standby mode: when dim level =0, the auxiliary power still can work. The default setting is enabled.
• update Online, use the smart key to connect the PC and the driver to update the firmware.

2. Dimming performance

• When changed to any dimming level, flicker wouldn’t occur, dimming would be achieved smoothly.
• In the range of 200~1500mA, the current operating in continuous mode; In the range of 0~200mA, the current operating in PWM dimming mode, and the PWM frequency 3.6KHZ.

3. Guide for setting driver’s parametersTouch setting

• Touch Setting Program driver’s parameters quickly and easily through Near Field Communication. Software download link:
  http://leddriver.moons.com.cn/SouProduct/UCenter/M_Search/Software_view.aspx?MATNR=TouchSetting&rnd=1411

• Smartkey Network Driver’s parameters can be set through Smartkey Ver.A1 and Smartkey Network. What’s more, the drive’s firmware can be used updated through this tool.
  http://leddriver.moons.com.cn/SouProduct/UCenter/M_Search/Software_view.aspx?MATNR=SmartkeyNetwork&rnd=1411

4. Tunable white, Dim to warm, Solo dimming, Dual dimming function introduction

Tunable white| Cold color channel| CH1| Control
port| DIM+CCT
---|---|---|---|---
Warm color channel| CH2
Dim to warm| Cold color channel| CH1| Control
port| DIM
---|---|---|---|---
Warm color channel| CH2
Solo dimming| One 0-10V port control two output channels
---|---
Dual dimming| Two 0-10V ports control two output channels

Mechanical Specification

Dimensions(Unit:mm)

Port:

RoHS Compliance:
Our products comply with the European Directive 2002/95/EC, calling for the elimination of lead and other hazardous substances from electronic products.

SHANGHAI MOONS’ AUTOMATION CONTROL CO., LTD.
Add: No.168, Mingjia Road, Minbei Industrial Park, Shanghai 201107, P.R.China
Tel: +86 (0)21 52634688 Website: www.moons.com.cn

References

• Product Center
• Product Center
• 步进电机,步进伺服电机,智能驱动器,集成式电机,直流无刷电机,LED驱动 - 鸣志

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>