Door / Window Sensor 7 with external power supply. Print
- June 7, 2024
- Aeotec
Table of Contents
This page is a guide on how to utilize your Door / Window Sensor 7 with permanent and form part of the larger Door / Window Sensor 7 user guide.
The Door / Windows Sensor 7 has the capability to work with an external DC power supply with 3.0 – 3.3 V.
You’ll need:
- Small gauge wires (preferably 18AWG).
- 3.0 / 3.3 VDC external power supply.
Follow these steps to wiring your Door / Window Sensor 7:
- Remove the battery.
- Connect ( + ) to terminal 1.
- Connect ( – ) to terminal 4 .
Warning:
– Please pay attention to the polarity, an exchange of (+) and (-) can lead to the destruction of the device and loss of warranty.
– The voltage of 3.3 V must not be exceeded. This will destroy the sensor and void the warranty.
– Never operate the battery and DC adapter together.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>