Stellate Air Quality Monitor Instruction Manual
- June 7, 2024
- Stellate
Table of Contents
Stellate Air Quality Monitor
Product Specifications
Display method: Common Screen display
Atmospheric pressure: 86Kpa – 106Kpa
Detection method for CO2: Infrared (NDIR)
Sampling time: 1.5 seconds
Product Size: 162x 94 x 87mm
Detection temperature: -10°C to 50°C;
Relative humidity: 20% – 85%
Storage temperature: -10°C to 60°C;
Concentration unit for CO2: PPM
Power source: Lithium battery with 3000 mAh capacity; 5V DC power
charging via micro USB port
Product weight: 280g
Product Description
This product is an air quality monitor that detects Carbon dioxide (CO2),Temperature, and Humidity. it combines sensors real-time monitoring of Carbon dioxide (CO2), temperature, and humidity on its display.
Considerations
Please read the instructions carefully before using this device.
Please let the device work short mins outdoors before use for most accurate
results . Please keep the manual handy for quick reference and
troubleshooting.
Precautions
Avoid covering the air intake areas during use to avoid inaccurate
measurements.
Avoid use of solvents to clean the product as residual fumes will skew air
quality readings.
Avoid water or other liquids near the product to avoid electrical damage.
Do not allow unauthorized modification or repair of this product.
Features
- -Common Screen display
- -Test variables: Carbon dioxide (CO2),temperature, humidity
- -Large 3000mAh capacity Lithium battery
- -5V Micro USB charging
- -Low battery warning
Instructions
Start Up
When you long press the power button, the air quality monitor will boot up.
About Charging
When low battery icon is displayed, the device needs to be charged. Insert the included or another compatible micro USB charging cable into the device. Attach the other end to a USB DC charger (such as a smart phone charger) that outputs DC 5V at >=1000mA. Fully charge for at least 2-3 hours before use. Avoid charging with a USB computer port which only outputs 500mA.
Parameters
CO2 technical indicators
Measuring range: 400-5000PPM
Resolution: 1 PPM
Temperature and humidity technical indicators
Measuring range: -10-50 ° C
Humidity range: 20%-85% RH
Measurement accuracy : ±1 °C
Measurement accuracy : ±4% RH
Product Key function description
-
- Power button
-
- Screen brightness increasing
-
- Screen brightness decreasing
-
- Alarm sound on/off
- Press power button to turn device on/off；
- Click button 2) to increase screen brightness
- Click button 3) to decrease screen brightness
- Single click button 4) to turn on/off alarm function(when turn on alarm function, it would beep sound once CO2 value more than 1000PPM)
- CO2 grades:
GOOD: 400-1000ppm
NORMAL: 1001-2000ppm
POOR: 2001-5000ppm
Product List
- Air Quality monitor x 1
- Micro USB charging cable x 1
- Product Manual x 1
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>