My SpinWave Robot’s Navigation | Support
- June 7, 2024
- Bissell
Table of Contents
The SpinWave Robot uses gyroscope technology to monitor the cleaning
process, driving in overlapping rows and keeping track of where it’s cleaned
-
Once the robot thinks it’s cleaned the middle portion of the accessible space it will drive along the walls to clean the edges before seeking the dock signal to recharge
-
The robot may return to the dock if it thinks it’s cleaned the entire accessible area, sometimes before the entire battery is consumed
- If robot is returning to dock early, or not able to return to the dock, please re-locate the docking station according to User Guide specifications
-
Remove obstacles that may cause the robot to become stuck or drive with difficulty to improve cleaning coverage and performance
- Clean sensors on robot with a dry cloth
-
With all wheels on the floor, turn machine on and off using the power switch on the side of machine
-
Certain floor types or obstacles may affect how smoothly the robot can drive and use the gyroscope technology for orientation
- The robot will attempt to continue cleaning in overlapping rows however some situations may cause a disruption to the pattern
- Let the robot complete the cleaning run as navigation issues can often be resolved as the robot continues cleaning
-
If your SpinWave Robot is getting stuck in a small area > Go to Stuck in Small Area
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>