My Little Green®/AutoCare ProHeat® Portable Carpet Cleaner has no heat | Support
- June 7, 2024
- Bissell
Table of Contents
*If the machine does not have a heater switch next to the power switch, there is no heater on the machine
-
Model 1400 does not have a heater
-
Model 50Y6’s power switch is the heater switch
-
The heater needs 30 seconds to warm before light illuminates
-
After deactivating the heater, the light will stay illuminated until the heater substantially cools down
-
Light will illuminate for as long as the heater is at the correct temperature
-
Any water that was left in hose from prior use will spray out cold
-
Allow 1 minute for any fluid left in hose to travel to end of hose
-
The heater will increase water temperature up to 25 degrees
- If there is still no heat, please visit a BISSELL Authorized Service Center or Contact Us
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>