My ProHeat 2X® Revolution® Pet Carpet Cleaner has No Suction in Tanks | Support
- June 7, 2024
- Bissell
Table of Contents
Have you checked hose for suction?
-
No > Go to No Suction
-
Yes > Turn off and unplug machine
-
Remove dirty water tank
- Press down on tank handle
- Tilt the tank slightly towards you and grab it with both hands
-
Empty dirty water tank
- Move the float in the dirty water tank up and down, checking if it moves freely
- If the float is not able to move freely, remove debris that may be binding the float
-
Reseat dirty water tank onto machine
-
Check dirty water tank for cracks or damage
- If damaged a new dirty water tank should be ordered > Go to Parts & Supplies
-
Remove the clean water tank by lifting straight up
-
Check clean water tanks for cracks, warping, or other damage
- If damaged, a new tank should be ordered > Go to Parts & Supplies
-
Fill clean water tank with water (do not exceed fill line)
-
Secure the rubber tab on top of the dirty water tank and reinsert it into machine
-
Put the clean water tank back on the machine
-
Test for suction
-
Has this resolved the issue?
- Yes > Great! Glad we could get you back to cleaning!
- No > Visit a BISSELL Authorized Service Center or Contact Us
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>