TurboClean DualPro Pet/PowerForce PowerBrush Pet XL Assembly and First Use Guide | Support
- June 7, 2024
- Bissell
Table of Contents
Assembly:
-
Remove all parts of the machine from box
-
Insert Handle to the base of the machine until it clicks
-
Align clean water tank with the grooves at the bottom of the handle, slide clean water tank into place
Filling Clean Water Tank:
-
Remove clean water tank from machine pulling up on the handle
-
Unscrew the cap
-
Fill with warm tap water to the water line on clean water tank
- Do not use boiling water, do not heat water and/or tank in the microwave, do not put clean water tank in dishwasher
-
If using a full size bottle of BISSELL Antibacterial Formula put the cap back onto the tank > Put the clean tank back on the machine
- Firmly insert the formula bottle into the cap on the tank and squeeze until formula reaches the easyfill formula line
-
If using other BISSELL formula add to the formula line on clean water tank
- Be sure to use the proper BISSELL formulas in your machine, other formulas may harm the machine and void the warranty
-
Replace cap onto clean water tank
-
Put clean water tank on machine and fimly press down until it is securely seated on machine
Cleaning Your Carpet
-
Plug in machine
-
Choose a cleaning mode if available on your model
-
Turn machine on
-
Step on recline pedal below the power switch while pulling back on the handle
-
Hold spray trigger for 10 seconds to prime the system with cleaning solution
-
Make forward and backward passes based on your selected cleaning modes
- If cleaning modes are not available on your machine, Follow the Deep Clean directions
-
Empty dirty water tank & refill clean water tank as needed
- For steps on emptying dirty water tank > Go to After Cleaning Care
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No