MultiClean™ Allergen Pet Lift-Off® & Non Lift-Off Cleaning Filters | Support

Maintaining your filters is very important to the function of your vacuum

The steps below provide instruction on how to clean and maintain your Dirt Tank and Filters

• If you are experiencing issues with reduced suction you’ll want to follow the complete list of steps before continuing > Go to No Suction

These steps are considered a part of routine maintenance

• Remove & empty Dirt Tank

• Release the Separator by twisting to the left to disconnect & remove

  • Clean Separator of all debris
  • Separator can be rinsed > Allow to completely air dry (24 – 48 hours) before reinstalling

• Open the Tank Lid > Lift up on the release latch on the front

  • Remove Filter and clear debris (machine should not be used without Filters installed)
  • Filters can be washed in warm water with mild dish soap > Allow to completely air dry (24 – 48 hours) before reinstalling

• Insert the thin Flat Filter (with the white tab) first > Then the Foam Filter

• You should hear a click when the Tank Lid is securely closed

• The Post Motor Filter is located below the Dirt Tank

  • Press down on tab to remove Filter Cover
  • Press tab on right side of Filter > Remove Filter > Remove debris (machine should not be used without Filters installed)
  • This pleated Filter is not washable
    • For optimal performance replace the Post Motor Filter every 6 months

• When reattaching Post Motor Filter > Insert left side first then lock the right side into place

  • Reattach Filter Cover

• For replacement Filters > Go to Parts & Supplies

• If you were having suction issues and the steps above did not resolve > Go to Lower Hose/Foot

• Recipient Email

Your Email

Your Name

Was this answer helpful?

Yes
No

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>