Pet Hair Eraser® Turbo Rewind Vacuum Cleaning Filters | Support

Maintaining your filters is very important to the function of your vacuum

The steps below provide instruction on how to clean and maintain your Dirt Tank and Filters

• If you are experiencing issues with reduced suction you’ll want to follow the complete list of steps before continuing > Go to No Suction

These steps are considered a part of routine maintenanc

• Remove and empty Dirt Tank

• Twist the Handle to unlock the Dirt Tank 

• Twist to remove the Separator from the bottom of Dirt Tank

  • Separator can be rinsed > Allow to completely air dry (24 – 48 hours) before reinstalling

• Remove the all Filters

• Open the Tank Lid > Remove the Pre-Motor Filters

  • Foam Filters can be rinsed > Allow to completely air dry (24 – 48 hours) before reinstalling

• Remove the Post-Motor Filter

  • Press down on tab > Remove Post-Motor Filter cover
  • Twist filter counter-clockwise to unlock and remove
  • The Post-Motor Filter cannot be washed
    • Remove debris regularly
    • Replace Filter when needed

`

• Filter should be locked into place before re-attaching Filter Cover

  • Twist Filter clockwise to secure
  • Reattach Filter cover

• Before replacing Dirt Tank

  • Turn machine on and check for suction at the opening where the top of the Dirt Tank connects to the machine

• For replacement Filters > Go to Parts & Supplies

• If you were having suction issues and the steps above did not resolve > Go to Lower Hose/Foot

• Recipient Email

Your Email

Your Name

Was this answer helpful?

Yes
No

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>