My ProHeat® ClearView®/Pro-Tech®/PowerSteamer® Pro Upright Carpet Cleaner is Dragging | Support
- June 7, 2024
- Bissell
Table of Contents
If your machine feels to be dragging, follow these steps to resolve:
Front floor nozzle or semi-circular window (half-moon window) could be out of alignment
-
Is there a ¼” gap between front window and where it wraps around and meets base?
- No > Go to Half-Moon Window Alignment
- Yes > Unscrew window, reinstall following the steps below
-
Front floor nozzle window should be screwed down properly
-
Gap can be eliminated by installing tabs at top of window
-
Once window is unscrewed, look at top of window
-
Past foam rimmed opening, there will be two tabs
-
Make sure those tabs are securely hooked into slots in base
-
Has this resolved the issue?
- Yes > Great! Glad we could get you back to cleaning!
- No > Go to Half-Moon Window Alignment
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>