My SpinWave Robot After Cleaning Care | Support

​

To maintain your machine so every cleaning experience is as effective as

the first, follow the steps below:

Mop Mode:

• Return machine to dock

• Turn machine off

• Remove Mop Tank > Press down on button and pull out

• Take off Mop Pads from Mop Pad Drivers

• Machine wash the Mop Pads seperately in warm water

  • Only use liquid detergent > Do not use bleach or fabric softener
  • Tumble dry on low > Do not iron or dry clean

• Clear any debris from the debris trap

• Put the Water Tank or Dirt Bin into machine and turn on to charge

Dry Mode:

• Return machine to dock

• Turn Machine Off

• Remove Dirt Bin > Press down on button and pull out

• Empty Dirt Bin over trash

• Remove filter cover and filters > Use Cleaning Tool to brush filters clean > Do not wash filters

• Rinse Dirt Bin with water > Dirt Bin must be completely dry before putting it back into the machine

• Reinstall filters and put Dirt Bin back into machine

• Turn machine back on and let it charge for its next clean

• For Brush Roll Maintenance > Go to Brush Not Turning

• For Edge Brush Maintenance > Got to Edge Brush Cleaning

Both Mop Mode & Dry Mode:

• Regularly wipe all sensors with a dry cloth

• Remove any debris that has accumulated behind and around Caster Wheel

  • The Caster Wheel should spin freely without wobbling
  • Remove Caster Wheel by pulling straight up > Both Caster Wheel and Wheel Frame should be removed > Clear debris from Wheel and underside of Wheel Frame
    • Reattach Caster wheel to Wheel Frame and insert securely into Robot
      • Wheel axle should be pressed firmly into the machine
    • If the Caster Wheel is damaged > Replace Caster Wheel > Go to Parts & Supplies

• Recipient Email

Your Email

Your Name

Was this answer helpful?

Yes
No

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>