My CleanView/PowerEdge/PowerGlide® Pet Slim Cordless Vacuum has No Power/Lights Flashing | Support
- June 7, 2024
- Bissell
Table of Contents
| Error | Lights Displayed | Possible Cause | Remedies |
|---|---|---|---|
| 3 Flashes > Solid | Suction Motor Fault | Indicates a blockage in the air |
path > See detailed instructions
HERE
| 3 Flashes > Solid| Brush Roll Stall| Indicates an obstruction in the Brush
area > See detailed instructions
HERE
| Battery Lights:
All 3 Flashing| Charger Issue| Confirm outlet is working > Test outlet with
another device
• Verify using correct Charger > Label on Charger = Model S018-1B262060HU
• If Charger is damaged > Replace Charger > Go to Parts &
Supplies
| All Display Lights:
3 Flashes > Solid| Battery Issue| Turn machine OFF > Unplug > Please Contact
Us
-
Connect Charger to the charging port on the back of the Hand Vac & plug into wall outlet
-
Normal charging behavior: White Light segments of battery icon blink individually
- Full charge > Requires 5 hours > All White Lights segments Blink
- If not, please Contact Us
-
Machine will not run while plugged into Charger
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>