My TurboClean DualPro Pet/PowerForce PowerBrush Pet XL has No Spray to Hose | Support
- June 7, 2024
- Bissell
Table of Contents
↵
If you are experiencing No/Low Spray to the hose, follow these steps to
resolve:
-
Turn off and unplug machine
-
Remove Hose & keep machine in the upright position
-
Remove tool from the end of the hose
-
Rinse the tool under warm water and set aside to dry
-
Clean the spray tip at the end of the hose with a paperclip
-
Reinsert the hose until it clicks into place
-
Plug machine in and turn on
-
Press hose trigger with tool removed to test for spray
-
Is there spray coming out of the spray tip?
- No > Go to Changing the Belt
- Yes > Reattach tool and test for spray with tool
- Is there spray with tool?
- Yes > Great! Glad we could get you back to cleaning!
- No > A new tool should be ordered > Go to Parts & Supplies
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>