Pet Hair Eraser® Turbo Plus Vacuum Cleaning Filters | Support
- June 7, 2024
- Bissell
Table of Contents
Maintaining your filters is very important to the function of your vacuum
The steps below provide instruction on how to clean and maintain your Dirt Tank and Filters
- If you are experiencing issues with reduced suction you’ll want to follow the complete list of steps before continuing > Go to No Suction
These steps are considered a part of routine maintenanc
-
Empty the Dirt Tank over a garbage bin
-
Unlock the Dirt Tank by twisting to the left to disconnect & remove
-
Remove all Filters
-
Open the Tank Lid > Lift the release latch on the front
- Remove Filter > Reattach Tank Lid
- Filter can be rinsed > Allow to completely air dry (24 – 48 hours) before reinstalling
-
Twist to remove the Separator from the bottom of Dirt Tank
- Separator can be rinsed > Allow to completely air dry (24 – 48 hours) before reinstalling
-
Remove the Post-Motor Filter
- Pull tab up to open cover of Post-Motor Filter
- Twist Filter counter clockwise to unlock and remove
- The Post-Motor Filter cannot be washed
- Remove debris regularly
- Replace filter when needed
-
For replacement Filters > Go to Parts & Supplies
-
If you were having suction issues and the steps above did not resolve > Go to Lower Hose/Foot
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>