Multi Reach™ Cordless Vacuum Cleaning Filters | Support
- June 7, 2024
- Bissell
Table of Contents
Maintaining your filters is very important to the function of your vacuum
The steps below provide instruction on how to clean and maintain your Dirt Bin and Filters
- If you are experiencing issues with reduced suction you’ll want to follow the complete list of steps before continuing > Go to No Suction
These steps are considered a part of routine maintenance
-
Remove Dirt Bin from Hand Vac
- Empty Dirt Bin by pulling the release latch
-
Remove Filter from top of Dirt Bin (machine should not be used without Filters installed)
- Clear debris from Filter
- Filter can be rinsed in warm water (no soap) > Allow to completely air dry (24 – 48 hours) before reinstalling
-
Return filter to dirt bin
-
Firmly push dirt bin into machine
- It should “click” into place
-
For replacement Filters > Go to Parts & Supplies
-
If you were having suction issues and the steps above did not resolve > Go to Brush/Foot Area
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>