My PROdry® Upright Carpet Cleaner brush is not turning | Support
- June 7, 2024
- Bissell
Table of Contents
The brush does not spin manually, and the brush will turn in the upright and reclined positions
-
Unplug machine
-
Take off both tanks, recline handle to floor, and roll machine over
-
Remove the brush to check the belt
- Take out the 6 screws from the sole plate
- Lift off the belt cover (on the non-cord side)
- Slide the brush out
- Replace brush if needed
- Replace belt if needed
-
The Overcurrent Protector may have been tripped
- Turn the machine off and wait at least 15 seconds
- The protector should reset, allowing cleaning to continue
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>