Battery Replacement | How to Video | CleanView® Connect Robotic Vacuum
- June 7, 2024
- Bissell
Table of Contents
Replacing the Battery
- A Phillips-head screwdriver is required
- Do not remove the plastic shrink wrap from the battery pack
- Make sure your robot is turned off
- Remove the battery cover
- Place your robot on a soft surface
- Remove the battery. The wires will still be connected, so place the battery on the bottom of the robot
- Press the battery connector tab to release the battery
- Connect new battery wires and install the battery into the robot
- Put the battery cover back on and you’re ready to clean again!
X0TUr4KHG1k
- Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Loading......