FeatherWeight/ReadyClean Cordless Vacuum Cleaning Filters | Support
- June 7, 2024
- Bissell
Table of Contents
Maintaining your filters is very important to the function of your vacuum
The steps below provide instruction on how to clean and maintain your Dirt Tank and Filters
- If you are experiencing issues with reduced suction you’ll want to follow the complete list of steps before continuing > Go to No Suction
These steps are considered a part of routine maintenance
-
Remove Dirt Tank from Hand Vac
- Press button on top of Hand Vac to remove
- Press release button on front of Hand Vac to remove Dirt Tank
-
Pull the Filter from top of Dirt Tank
- Empty debris from Dirt Tank
- Remove Filter Screen from Filter by twisting to unlock
- Clear debris from Filter & Filter Screen (machine should not be used without Filters installed)
- Filter and Filter Screen can be rinsed in warm water > Allow to completely air dry (24 – 48 hours) before reinstalling
-
Remove Mesh Filter from Hand Vac (attached to the opening on the base)
- Clear debris from Mesh Filter (machine should not be used without Filters installed)
- Mesh Filter can be rinsed in warm water > Allow to completely air dry (24 – 48 hours) before reinstalling
-
Reinsert Mesh Filter to Hand Vac > Twist & lock Filter into Filter Screen > Reinsert into Dirt Tank
-
Attach Dirt Tank to Hand Vac
- You should hear a click when Tank is secure
-
For replacement Filters > Go to Parts & Supplies
-
If you were having suction issues and the steps above did not resolve > Go to Brush/Foot Area
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>