My Powerlifter/Trilogy® Super Light Stick Vacuum brush is not turning | Support
- June 7, 2024
- Bissell
Table of Contents
-
Brush must be on “hi/lo” to turn
-
Push up once for “lo”
-
Push up twice for “hi”
-
It is normal for the brush motor to make a higher pitched noise in the “hi” setting
-
Hand Vac and Foot Assembly should be securely locked into place
- Parts will click if properly locked in place
-
Gaskets in Hand Vac and on extension wand that connects to the foot must be clear of debris
-
Brush roll will not turn if jammed
- Unplug machine
- Turn the yellow tab on the left side (with brush closest to you) using a coin
- Remove the white belt cover to remove brush
- Clean debris from brush and endcaps
- If belt is broken, visit a BISSELL Authorized Service Center or Contact Us
-
Recipient Email
-
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>