My CleanView® Connect Robotic Vacuum has No Suction | Support
- June 7, 2024
- Bissell
Table of Contents
-
Please Note: The vacuum is not intended for use on:
- High pile carpet (only bare floor or low pile carpet/rugs)
- Black or very dark carpet – it will trigger the sensors (thinking it is on a cliff/edge of stairs) and the Robot will turn off
-
Empty the Dirt Bin
- Press the button on top of the Dirt Bin and pull to remove
-
Open the Filter door by pulling both sides apart
-
Empty debris from Dirt Bin
-
Remove the Filter cover, the Foam and Pleated Filters
-
Use the Cleaning Tool to brush the Filter Cover and Filters
- Filters are not washable
- The Dirt Bin can be rinsed, allow to completely air dry (24 – 48 hours)
-
Reinstall Filters, Filter Cover, close and push back into machine
-
Need replacement Filters? Go to Parts & Supplies
If you continue to have no suction, please Contact Us
- Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>