My SpinWave Robot is Streaking | Support
- June 7, 2024
- Bissell
Table of Contents
If you are experiencing streaking, follow the steps below to resolve:
-
If the robot is dispensing too much fluid > Go to Dispensing Too Much Solution
-
Return machine to dock
-
Turn machine off
-
Remove Mop Tank > Press down on button and pull out
-
Check the correct amount of water and BISSELL formula are being used in the wet tank
-
Take off Mop Pads from Mop Pad Drivers
-
Machine wash the Mop Pads seperately in warm water
- Only use liquid detergent > Do not use bleach or fabric softener
- Tumble dry on low > Do not iron or dry clean
-
Clear any debris from the debris trap
-
Put clean pads back onto water tank and put in robot
-
Has this resolved the streaking?
- Yes > Great! Glad we could get you back to cleaning!
- No > Visit a BISSELL Authorized Service Center or Contact Us
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>