My BARKBATH™ Dual Use has No Spray | Support
- June 7, 2024
- Bissell
Table of Contents
-
Power off machine and unplug
-
Remove clean water tank
-
Fill clean water tank if empty and securely attach the cap
-
Check tank and cap for any cracks or damage
- If there are cracks or damage on either tank or the cap, a replacement should be ordered
-
Install clean tank back onto machine, press down until secure with no gaps between machine and tank
-
Plug machine in, power it on and test for spray
-
Remove any tools attached to hose
-
Turn machine on and hold the end of hose, without the tool, over a cloth
-
Press trigger and test for spray coming from spray tip
-
If machine sprays without tool attached clean tool with a cloth or soft bristled brush
-
Check for cracks or damage to tool
- If tool is cracked or damaged a replacement should be ordered
-
If machine does not spray without tool attached clean the spray tip with a paperclip to remove any clogs
-
Put the tool back on machine and test for spray
-
If there is still no spray, Contact Us
- Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No