resideo FK09S Braukmann User Guide

Filter Combinations
Braukmann
FK09S

Filter combination with reverse rinsable fine filter
clear filter bowl and balanced-seat pressure reducing valve

APPLICATION

The FK09S filter combinations comprise a reverse rinsing filter and pressure reducing valve in one appliance. They ensure a continuous supply of filtered water. The fine filter stops the ingress of foreign bodies, for example, rust particles, strands of hemp, and grains of sand, and thus reduces the probability of corrosion. The pressure-reducing valve prevents pressure damage and reduces water consumption.
All individual units correspond to the requirements of current DIN/DVGW specifications. Technical features of each unit also apply to the combination assembly.

SPECIAL FEATURES

• Filtered water supplied even during reverse rinsing
• Patented reverse rinsing system – fast and thorough cleaning of the filter with a small amount of water
• Memory ring indicates when the next manual reverse rinsing is due
• Automatic reverse rinsing actuator with bayonet the connector can be retrofitted
• Shock-resistant clear synthetic material filter bowl enables easy checking of filter contamination
• Inlet pressure balancing – no influence on the outlet pressure by fluctuating inlet pressure
• Filter and complete filter bowl are replaceable
• The valve insert is of high-quality synthetic material and can be fully exchanged
• Large filter surface
• Standardized discharge connection
• All materials are KTW approved

TECHNICAL DATA

Media

Medium:| Drinking water

Connections/Sizes

Connection sizes:| 1/2″ – 2″

Pressure values

Min. operating pressure:| 1.5  bar (dynamic pressure)
Max. inlet pressure with clear filter bowl:| 16 bar
Outlet pressure:| 1.5 – 6 bar

Operating temperatures

Max. operating temperature medium accord. to EN 1567:| 30 °C

Specifications

Installation position:| Horizontal with filter bowl downwards

Note:
The filter is constructed for drinking water installations. In the case of a process water application, the filter has to be proven individually.

**CONSTRUCTION

**

Overview

| Components| Materials
---|---|---
1| Spring bonnet with adjustment knob and setting scale| High-quality synthetic material
2| Housing with pressure gauge connections on both sides| Dezincification- resistant brass
3| Threaded or soldered union connections| Brass
4| Fine filter in the clear filter bowl| Stainless steel, shock-resistant, transparent
synthetic material filter bowl
5| Ball valve with drain connection| Brass (Ball Valve body), Stainless steel (ball), Plasticdurethan (drain adapter)
| Not depicted components:
Valve insert complete with diaphragm and valve seat| High-quality synthetic
material, fibre-reinforced
NBR diaphragm
Seals| NBR
Double wring wrench| Plastic

METHOD OF OPERATION

The filter combination combines reverse rinsing filter and pressure reducing valve in one appliance.
The filter insert comprises an upper part and a lower combination section. When in the „filtering“ position, the small upper filter is closed so that the water can only pass through the main filter from the outside to the inside. When the ball valve is opened for reverse rinsing, the filter is pushed downwards until the water supply to the outer side of the main filter is stopped. Simultaneously, the water flow is opened to the upper part of the filter. The water needed for cleaning the filter passes through the upper sieve, the rotating impeller, and the main filter from inside to outside. By this means, the filter is fully cleaned over its whole surface area at the full inlet pressure. The filter automatically switches over to the operating position when the ball valve is
closed again.
The integral pressure reducing valve functions on a balanced force principle whereby the force exerted by a diaphragm is balanced against the force of an adjustment spring. The inlet pressure has no influence on the opening or closing of the valve. Inlet pressure fluctuation does not
therefore affect the outlet pressure.

TRANSPORTATION AND STORAGE

Keep parts in their original packaging and unpack them shortly before use.
The following parameters apply during transportation and storage:

*non condensing

INSTALLATION GUIDELINES

Setup requirements

• Install in horizontal pipework with filter bowl downwards
  – This position ensures optimum filter efficiency

• Install shut-off valves

• Ensure good access
  – Pressure gauge can be read off easily
  – Degree of contamination can be easily seen with a clear filter bowl
  – Simplifies maintenance and inspection

• The installation location should be protected against frost

• Related to the EN 806-2 it is recommended to install the filter immediately after the water meter

• In order to avoid flooding, it is recommended to arrange a permanent professionally dimensioned wastewater connection

Installation Example

TECHNICAL CHARACTERISTICS

kvs-Values

Pressure drop characteristics

DIMENSIONS
Overview

Note All dimensions in mm unless stated otherwise.

ORDERING INFORMATION

The following tables contain all the information you need to make an order of an item of your choice. When ordering, please always state the type, the ordering, or the part number.
Options
The filter combination is available in the following sizes: 1/2″,3/4″, 1″, 1¹/4″, 1¹/2″ and 2″.
• standard
– not available

| FK09S-…AA| FK09S-…EA
---|---|---
Connection type:| Threaded union connectors, filter mesh size 100 μm|

•

|

–

Without connections, filter mesh size 100 μm|

–

|

•

Note: … = space holder for connection size
Note: Ordering number example for 1″ and type AA valve: FK09S-1AA

| Z11S| Automatic reverse rinsing actuator
For automatic filter cleaning at presettable intervals
| 230 V, 50/60 Hz, 10 with molded Schuko electrical plug| Z11S-A
24 V, 50/60 Hz, 10 without an electrical plug| Z11S-B
230 V, 50/60 Hz, 10 with molded Type 12 electrical plug for

Switzerland

| Z11S-Z
| VST06B| Connection set
Solder connections
| | 1/2″| VST06-1/2B
3/4″| VST06-3/4B
1″| VST06-1B
1¹/4″| VST06-11/4B
1¹/2″| VST06-11/2B
2″| VST06-2B
| ZR10K| Double ring wrench for removing the filter bowl
| | 1/2″+3/4”| ZR10K-3/4
1″+1¹/4″| ZR10K-1
1¹/2″+2″| ZR10K-11/2

Spare Parts
FK09S Filter Combinations from 1997 onwards

Overview

|
---|---
| Description| Dimension| Part No.
---|---|---|---
1| Spring bonnet complete with setting scale
| | 0901515
0901516
0901518
2| Valve replacement set complete (without strainer)
| | D06FA-1/2
D06FA-1B
D06FA-11/2
3| Connection set threaded connection
| | VST06-1/2A
VST06-3/4A
VST06-1A
VST06-11/4A
VST06-11/2A
VST06-2A
3a| Union seal washer (10 pcs.)
| | 0901443
0901444
0901445
0901446
0901447
0901448
4| Pressure gauge

|

0 – 10 bar

| M07M-A10
5| O-ring set (10 pcs.)
| | 0901246
0901499
0901248
6| Filter insert complete
| Filter mesh 100 μ
Filter mesh 100 μ
Filter mesh 100 μ
Filter mesh 20 μ
Filter mesh 20 μ
Filter mesh 20 μ
Filter mesh 50 μ
Filter mesh 50 μ
Filter mesh 50 μ
Filter mesh 200 μ
Filter mesh 200 μ
Filter mesh 200 μ
Filter mesh 300 μ
Filter mesh 300 μ
Filter mesh 300 μ
Filter mesh 500 μ
Filter mesh 500 μ
Filter mesh 500 μ| | AF11S-1A
AF11S-1/2A
AF11S-11/2A
AF11S-1B
AF11S-1/2B
AF11S-11/2B
AF11S-1C
AF11S-1/2C
AF11S-11/2C
AF11S-1D
AF11S-1/2D
AF11S-11/2D
AF11S-1E
AF11S-1/2E
AF11S-11/2E
AF11S-1F
AF11S-1/2F
AF11S-11/2F
7| Clear filter bowl
| | KF11S-1A
KF11S-11/2A
8| O-ring set (10 pcs.)
| | 0900747
0900748
9| Drain connector
|

1/2″-2

| AA76-1/2A
10| Ball valve complete
| |

1/2″-2

| KH11S-1A
11| Double ring wrench for removing the filter bowl and spring bonnet (no fig.)
| | ZR10K-1
ZR10K-11/2
12| Spring
| | 2074900
2159400
13| Red bronze filter bowl
| | FT09RS-1A
FT09RS-11/2A

Note: 1 – 6 see on page 6

FK09S – Filter combination with reverse rinsable fine filter
Product Specification Sheet • EN0H-1130GE23 R0420 • Subject to change

Manufactured for
and on behalf of
Pittway Sàrl, Z.A., La Pièce 4, 1180 Rolle, Switzerland by its authorized representative Ademco 1 GmbH
For more information
homecomfort.resideo.com/europe
Ademco 1 GmbH, Hardhofweg 40,
74821 MOSBACH, GERMANY
Phone: +49 6261 810
Fax: +49 6261 81309
Subject to change. EN0H-1130GE23 R0420
© 2020 Resideo Technologies, Inc. All rights reserved.

References

• Comfort Europe from Resideo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>