PURE CLEAN PU-WAXINGKIT-01 Hair Removal Home Waxing Kit User Guide

PURE CLEAN PU-WAXINGKIT-01 Hair Removal Home Waxing Kit

At PURECLEAN , we get that at-home waxing is the solution for some, and seek to make professional and high-quality waxing products and equipment available and accessible so that professionals and at-home users alike can have the best waxing experience possible, and can provide the right long-term waxing results they need for success.
Waxing at home comes down to more than just applying and removing wax. No matter if this is your first time waxing at home or if you’ve done it several times before, having the right technique and pre and post-wax care process is imperative in making sure that you’re performing the best wax.

Going about your waxing services correctly will also ensure that you’re staying safe and waxing properly. For everything you need to know about waxing at home, we’ve got your quick guide to all things at-home hair removal.

1. READY
   Hair should be 1/4 inch long to wax effectively. Your skin should be clean and dry.

2. SET
   Put wax into the wax warmer and allow the beads to melt until it’s the consistency of honey.

3. TEST
   Test a small amount of melted wax on the inside of your wrist to make sure that it’s not too hot.

4. APPLY
   Using the applicator, apply the wax in the direction of hair growth. Work in small manageable sections.

5. COOL
   Wait for 30-45 seconds and allow the wax to harden. It’s ready to remove as soon as it’s no longer sticky to the touch.

6. PULL
   Hold skin taut. Flick the edge of the wax-up and pull quickly in the opposite direction of hair growth.

HOW TO USE PURECLEAN WAX BEANS

Application of hard wax depends on the area to be waxed and how coarse the hair is. PURECLEAN provides a wide variety of formulas targeting different body areas and types of hair. Different colors of hard wax are sequenced in order of effectiveness in terms of hair removal on the targeted area (e.g., Cream works best for facial/fine hair)

• Please note that the result will vary depending on your skin type, how you apply the wax, room temperature, etc.

To perform an effective result, it’s recommended that you follow the instructions below:

1. Allow the wax to melt completely. We recommend a temp between 150-180℉.
2. The best indication that your wax is the right applicable temperature is when it resembles the consistency of thick honey.
3. Always use it with caution. It’s important to test a small amount of melted wax on the inside of your wrist before application.
4. Make sure your skin is completely dry before waxing. Apply some baby powder to soak up any excess moisture if necessary.
5. Using the applicator, apply wax in the direction of hair growth. Use firm pressure to ensure each hair is shrink-wrapped with wax.
6. Wait 30-45 seconds and allow the wax to harden.
7. It’s ready to be removed as soon as it’s no longer sticky to the touch. Hold skin taut. Flick the edge of the wax-up and pull quickly AGAINST the direction of hair growth.
8. Repeat over different sections until the desired area is soft, silky hair-free.
   READ ALL INSTRUCTIONS BEFORE USING.

LOCATION

Please treat only small areas at once if you are new to waxing.

EYEBROWS

• Brush, shape, and cut brows before waxing.
• Use the mini brow applicator and wax in small sections for precise results.
• Use Vaseline or coconut oil as a protective barrier over any brow hair you don’t want the wax to stick to.
• Be cautious that wax doesn’t drip into eyes.

UPPER LIP, CHIN & CHEEKS

• Wax your upper lip in the right, left, and center sections.
• Facial hair can grow in swirls, so stick with small sections.

UNDERARMS/LEGS

• Note the hair growth pattern before you begin. You may need to wax in several sections if your armpit hair grows in multiple directions.
• Applying against hair growth may be necessary to completely pick up all the hair.

BIKINI & BRAZILIAN

• Have a mirror on hand.
• Sit on the floor or on your bed with a towel under you, with the soles of your feet touching each other.
• Start waxing from the outside edges of the hairline, where your hair is thinnest and less sensitive.
• Take note of the way your hair grows. Work in small manageable sections.
• Hold your skin taut while removing wax, especially in sensitive areas prone to bruising

EASY CLEANUP OF WAX POT

Note :

• You don’t need to clean the wax pot after each use!
• The leftover wax can be melted and reused for application next time.
• To clean your pot, please ensure that the appliance is unplugged but still warm.
• Use cotton muslin strips or paper towels to wipe clean.
• You can also use a wax warmer cleaning solution or a small amount of oil.

INTRODUCTION

Congratulations on the purchase of the Pureclean Waxing Kit. You have selected a high-quality product. Please familiarize yourself with all operating and safety instructions BEFORE using this appliance.

INTENDED USE

This appliance has been designed exclusively for hair removal of legs, armpits, and the bikini zone on the human body. The warmer is suitable for use for all wax types (including canned wax). It is intended solely for use in private households.

TECHNICAL DETAILS

• Voltage :  110 – 240 V ~ (AC), 50 – 60 Hz
• Power consumption:   50 W
• Capacity: 500 ml

USER INSTRUCTIONS

HOW TO USE PURE CLEAN WAX WARMER

1. Fill the removable pot with 3.5-11 oz wax beads.
2. Place the pot into the designated insert within the warmer.
3. To melt wax quickly, place the lid on and turn the dial clockwise to max heat.
4. After the wax is melted into a liquid consistency, adjust to your desired temperature.

You’ll see the indicator light turn from red to off when the desired temperature is reached.

• The temperature will remain constant, meaning the warmer will automatically turn on to heat wax when it drops below the desired temperature.

This product has been tested to comply with EMC Directive (2014/30/EU), LVD Directive (2014/35/EU), and FCC standards.

• During the first few minutes of initial use, you may notice a slight odor. This is normal and will quickly disappear.

TROUBLESHOOTING Q+A

• Why didn’t the wax remove all my hair?

  • The hair was too short. The ideal length for the wax to grip and remove hair from root is 0.25inch-0.75inch (0.6cm-2cm).
  • The wax was too cool. Heat the wax until it’s the consistency of honey.
  • Sometimes hair grows in multiple directions. Try a second application while applying the wax in an alternate direction.
  • If hair remains after 2-3 passes, it’s best to clean up with tweezers.
  • Apply more pressure with the applicator. Firm pressure ensures each hair is shrink-wrapped with wax.

• Why is wax residue left on my skin?

  • The wax was applied too thin. Use a little more. Apply it about a nickel thick.
  • The wax was applied unevenly. With practice you will avoid this issue.
  • Use the AFTER-Wax treatment oil to remove any residue.

• How long should my hair growth be?
  We advise waiting until your hair is at least ¼ inch in length (around the size of a grain of rice). If your hair is too short, there won’t be enough length for the wax to grip it, and your results won’t be successful.

• Are there any concerns I should be aware of?

  • Avoid applying wax to moles, warts, mucous tissue, and sunburned or irritated skin.
  • Do not use wax if you’re taking Retin-A or Accutane.
  • Do not wax after plastic surgery or a chemical peel until approved by a physician.
  • Avoid sun and hot water for 8 hours after use.

• Do I need cloth strips?
  Nope. No cloth strips are needed with hard wax.

• Is that normal If the wax warmer auto turns on and off?
  This wax warmer has an AUTOMATIC POWER OFF FUNCTION — When wax warmer in a hot temperature, the indicator light will turn down automatically and turn on when the temperature is low.

• Can I mix the wax？
  Mixing the wax is doable but not recommended. We don’t recommend mixing different formulas as each wax performs differently and mixing multiple variations of the wax can lead to the product not performing the same.

• Is waxing at home easy？
  Waxing at home is an easy process when following the proper instructions and procedures as outlined on your respective PURECLEAN waxes and wax warmer.

• How can I do painless waxing at home？
  No waxing session is going to be completely painless, but with the proper pre and post waxing care regimen, you can ease the amount of pain you experience during an at home waxing service.

• Why does the wax keep breaking？
  Wax breaking during the removal process is typically caused by two main reasons. Either the wax application is too thin or the wax was left on the skin for too long. To avoid the wax breaking during the application process we recommend applying a thicker layer of wax to the skin to get the rhythm or groove of the wax’s behavior creating a lip for grip to remove the strip. The density of the wax will determine the sensitivity of the wax during the removal process. The wax should rest on the skin for approximately 30-40 seconds prior to the removal. If your wax is still wet after 30-40 seconds, please allow an additional 30 seconds until the wax has dried.

When it comes to waxing on your own, you’ll need not only the right waxing formulas at your fingertips, but also the right equipment, accessories, and pre and post-wax products so that you’re getting the best hair removal experience possible. Luckily for you, PURECLEAN has a host of at-home waxing kits that contain just what you need to wax the right way, no matter your formula preferences or style.

1. Starter hard waxing kit
   If you’re just getting started in the world of waxing, our Starter Hard Wax Kit is exactly what you need to thrive. This kit is ideal for students and or for hard wax aficionados who are looking to really tailor services to their clients’ preferences, skincare needs, and preferred hard wax type.

2. Beginners waxing kit
   For hard wax fans or beginners just getting started, this Starter Hard Wax Kit is everything you need to cater services to your wax preferences and pre & post-wax skincare needs.

3. Great value waxing kit
   21oz large refill wax beads are enough for a whole body waxing session and make sure you never run out of stock. Great Value for Money with full body waxing!

4. Facial waxing kit
   For all things eyebrow and facial waxing, look no further than PUCLEAN’s Facial Waxing Kit.

Waxing at home is safe, simple, and easy when done right and when following the proper process. When waxing at home, it’s even more important to follow proper pre and post-care techniques and follow the instructions specified on your respective warmer and waxing products.

CONTACT US
Should you have any concerns with your order, please reach out and allow us the opportunity to make it right.

• support@pureclean.online
• pureclean.net
• Facebook :facebook.com/purecleanwax
• Insta :purecleanwax

FAQs

How long does it take to heat the wax in the PURECLEAN PU-WAXINGKIT-01?

The time it takes to heat the wax in the PURECLEAN PU-WAXINGKIT-01 varies, but it generally takes a few minutes. It's important to follow the specific instructions for heating to ensure safety and effectiveness.

Is the temperature of the wax adjustable in the PURECLEAN PU-WAXINGKIT-01?

Yes, the PURECLEAN PU-WAXINGKIT-01 typically features an adjustable temperature control for the wax warmer, allowing you to heat the wax to a comfortable level.

What types of wax are included with the PURECLEAN PU-WAXINGKIT-01?

The types of wax included with the PURECLEAN PU-WAXINGKIT-01 can vary, but often include options like hard wax beads. These are suitable for different hair types and areas of the body.

Can the PURECLEAN PU-WAXINGKIT-01 be used by both men and women?

Yes, the PURECLEAN PU-WAXINGKIT-01 is suitable for both men and women. It's effective for removing hair from various body parts regardless of gender.

Is it painful to use the PURECLEAN PU-WAXINGKIT-01?

Waxing can be somewhat painful, especially for beginners or in sensitive areas. The PURECLEAN PU-WAXINGKIT-01 is designed to make the process as comfortable as possible, but individual pain tolerance varies.

How long do the results last when using the PURECLEAN PU-WAXINGKIT-01?

Results can vary, but generally, hair removal with the PURECLEAN PU- WAXINGKIT-01 can last for several weeks. The duration depends on your hair growth rate.

How do I clean the wax warmer in the PURECLEAN PU-WAXINGKIT-01 kit after use?

To clean the wax warmer in the PURECLEAN PU-WAXINGKIT-01 kit, let the wax cool and harden, then gently scrape it out. You can also use a wax cleaner or oil to remove any residue. Always unplug the warmer before cleaning.

How long does the hair need to be for effective removal with the PURECLEAN PU- WAXINGKIT-01?

For effective hair removal with the PURECLEAN PU-WAXINGKIT-01, hair should be at least 1/4 inch long. This allows the wax to grip the hair properly for more efficient removal.

Can the PURECLEAN PU-WAXINGKIT-01 be used on all areas of the body?

Yes, the PURECLEAN PU-WAXINGKIT-01 can be used on various parts of the body including legs, arms, underarms, and bikini area. It's important to follow the instructions carefully, especially when waxing sensitive areas.

Is the PURECLEAN PU-WAXINGKIT-01 suitable for all skin types?

The PURECLEAN PU-WAXINGKIT-01 is designed to be suitable for most skin types. However, it's always recommended to do a patch test on a small area of skin to check for any adverse reactions, especially if you have sensitive skin.

What is included in the PURECLEAN PU-WAXINGKIT-01 Hair Removal Home Waxing Kit?

The PURECLEAN PU-WAXINGKIT-01 Hair Removal Home Waxing Kit typically includes a wax warmer, a variety of wax beads, applicator sticks, and possibly pre and post-waxing treatments. The exact contents can vary, so it's best to check the product description for specific details.

Video-PURE CLEAN PU-WAXINGKIT-01 Hair Removal Home Waxing Kit

Download This Manual PDF:PURE CLEAN PU-WAXINGKIT-01 Hair Removal Home Waxing Kit User Guide

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>