CORSAIR VOID RGB Elite Wireless Instruction Manual
- June 7, 2024
- Corsair
Table of Contents
CORSAIR VOID RGB Elite Wireless Instruction Manual
IMPORTANT INFORMATION
Read the Quick Start Guide before using this product and refer to the Warranty Guide for warranty and service information. If damage is caused by failure to follow any of the instructions or guidelines, the warranty does not apply.
CORSAIR VOID RGB ELITE WIRELESS
Gaming Headset
Product Name and Model: Wireless Headset/RDA0011
Product Name and Model: Wireless Dongle/RDA0012
PRODUCT SAFETY GUIDELINES
- Use this product in accordance with the Quick Start Guide and manufacturer instructions.
- Charge this product only with the included USB charging/data cable and a USB Type-A port on your PC.
- Use and store this product in a room temperature controlled environment.
- Clean this product only with a dry cloth. > Use this product only with manufacturer approved accessories.
- Unplug this product when unused for a long period of time or during power-related events such as a power outage or lighting storm.
- Refer this product to qualified service personnel in the event that it and/or included accessories have been damaged and/or do not function properly.
- DO NOT cover, block any ventilation openings, or use this product in a confined space.
- DO NOT use or store this product near heat sources or in direct sunlight.
- DO NOT use near or expose this product to liquids, and power it off immediately if liquids come in contact.
- DO NOT place this product on or near power cords or other electrical equipment.
- DO NOT insert foreign objects into product openings
BATTERY SAFETY GUIDELINES
- This product has a non-user serviceable Li-Polymer battery.
- DO NOT attempt to remove the battery. > DO NOT attempt to change the battery. Instead, contact CORSAIR Customer Support for repair or replacement information.
- DO NOT dispose of this product in household waste bins.
CAUTION
Failing to follow all safety guidelines may result product damage, explosion,
fire, and/or electric shock.
BATTERY REMOVAL INFORMATION
This product uses a rechargeable battery and safety guidelines must be followed in the event that the product is disabled for disposal and recycling. To safely remove the battery for disposal and recycling, follow the numbered steps with the below diagrams.
CORSAIR MEMORY, Inc. encourages customers to recycle used electronic hardware and rechargeable batteries in accordance with local laws and regulations.
CAUTION!
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment.
FCC Statement
WARNING: Changes or modifications not expressly approved by CORSAIR MEMORY, Inc could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet that is on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
- FCC ID: 2AAFMRDA0011 (Headset)
- FCC ID: 2AAFMRDA0012 (Dongle)
This product complies with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.
This device complies with ISED’s license-exempt RSSs. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
- IC: 10954A-RDA0011 (Headset)
- IC: 10954A-RDA0012 (Dongle)
This product complies with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. CAN ICES-3(B)/NMB-3(B).
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>