Tanbux SOP03-15A Outdoor Smart Plug User Manual

Outdoor Smart Plug
Model: SOP03-15A
User Manual

You’re all set!
Any question?
[email protected]
www.amazon.com/tonbux

Product Structure

※Notice: There are no other LED colors except solid blue, solid green, and blinking green, if it became blue with blinking green, that is caused by you touch the on/off button by mistake when you enter the pairing mode, please just ignore the blue light, only remember that blinking green light enters the pairing mode.

Smart Life App-Connect

Pre-check

1. 1st time to connecting to Wi-Fi & phone, make sure the outdoor smart plug is connected to the same Wi-Fi (2.4G ONLY) as your phone connected.Dual-band Wi-Fi router- 2.4G & 5G, select 2.4G. After initially the setting, you can access other Wi-Fi or 4G/3G/2G cellular to control it
2. Phone system: IOS 8.0 or above & Android V4.4 or above.
3. Far away from wifi router or poor wifi will cause wifi connection drop.

Download the Smart Life APP

Search “Smart Life” on the App store, Google Play, or Scan the QR code on the User Manual and install it.

http://smartapp.tuya.com/smartlife

Register a Smart life account

Enter the mobile number or E-mail address to register an account with a verification code.

Connect the device

There are two network connection methods (Normal mode and AP mode).
Normal mode is the default. Users could tap the upper right corner to switch the connection method to AP mode.

（Ⅰ）Normal mode

Step 1 Set Rapid Flashing Indicator Light (Pairing Mode)

1. Pls plug the smart plug into the wall, and the color is blue
2. Pls long press the on/off button for 5s or more, the indicator light will rapidly

Step 2 Tap” Add Device” or “+” Step 3 Choose” Electric Outlet”

Step 4 Add Device-Normal Mode
Long press the on/off button for 5s or more until the device’s indicator turn into rapidly blinking green lights (2 times per second)
Step 5 Enter Wifi Password
Normal Mode, automatic connect to your home wifi, then enter Wi-Fi password

Step 6 Connecting
Step 7 Edit Device’s Name

（Ⅱ）AP mode

Step 1 Set Slow Flashing Indicator Light (Pairing Mode)

1. Pls plug the smart plug into the wall and the
2. Pls long press the on/off button for 5s or more, the indicator light will rapidly
3. Hold the on/off button for 5s until the indicator light color is blue flashing. slowly flashing

Step 2 Tap” Add Device” or “+” Step 3 Choose” Electric Outlet”

Step 4 Add Device-AP Mode
After the light turn into rapidly blinking green lights, continue to long press the on/off button for 5s or more until the device’s indicator turn into slowly blinking green lights(1 times 3 seconds)
Step 5 Enter Wifi
For AP Mode, connect to the Wi-Fi hotspot named ”SmartLife” as shown in the pics. Note: Some devices might have different hotspot names.

Step 6 Connecting
Step 7 Edit Device’s Name

FAQ

※Not able to connect the smart product:

1. Please kindly check if the product connects the power, turns on, and enters the configuration status (When the product turns on, long-press the on/off switch for 5 seconds, it will enter configuration status.)
2. Please check if your mobile phone can connect to the Wi-Fi and have a strong Wi-Fi signal.
3. Please make sure the Wi-Fi frequency is 2.4GHz. If the Wi-Fi network frequency is 5GHz, it’s not able to connect the smart product.
4. Please kindly check if the Wi-Fi password is correct when you add the smart products to your device. (Note that case sensitive, punctuation and spaces.)

Please kindly check the above and make sure there is no problem and reconnect. If the connection still fails, please check the settings of your Wi-Fi:

1. Please enter the router’s setting page: First, turn off ‘SmartSet Up’ and ‘Parental Controls’ these two functions.

2. Wi-Fi setting of your router: The encryption method should be set to WPA2-PSK type, the authentication type is AES. Or both the encryption
   method and the authentication type are automatic. The wireless mode cannot be ‘11n only’.

3. Wi-fi name and password are recommended to be set to English letters + Numbers, no spaces, and special characters. Please kindly check the above and make sure there is no problem and reconnect. If the connection still fails, please check the settings of your Wi-Fi；

4. Please check if the number of access devices has reached the upper limit of the router. Try to turn off some Wi-Fi devices, restart the router and reconnect the network.

5. If the router enables wireless MAC address filtering, the device MAC should be added to the allowed device list to ensure that the router does
   not prohibit the device from networking.

※Product is automatically disconnected/ reconnected during using, no response during operation, and response lag:

1. Please make sure the product is under Wi-Fi coverage with a strong signal.
2. Make sure the power supply is stable and the Wi-Fi can be connected to the external network.

※Can the device be controlled under Mobile 2G/3G/4G network? When adding the smart device for the first time, the smart device and the mobile
phone must be in the same 2.4GHz wi-fi environment. After being added successfully, the mobile phone is able to remote control the smart device under 2G/ 3G/ 4G network (kindly note that the smart device should be under wifi coverage with strong wifi signal).

Specification

Outdoor Smart Plug
Model Number: SOP03-15A
Waterproof Level: IP44
Parameters: AC 100-240V 50/60Hz
Max Power: 1875W(resistance loading)
Max Current: 15A
Rated Voltage: 125V
Working Temperature: -20~60°C(-4~140°F)
Remote Control: Smart Life APP (Compatible with Android 4.1/IOS 8.0)
Package content
1 x Outdoor Smart Plug
1 x User Manual
1 x Thanksgiving card

References

• Amazon.com: TONBUX

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>