Jabra Engage 75 Wireless Earbuds User Manual
- June 3, 2024
- Jabra
Table of Contents
Jabra Engage 75 Wireless Earbuds
How do I connect my Jabra Engage with my Aastra 53i, 55i, 57i, 6753i, 6755i, 6757i desk phone so I have remote call control using my headset?
Prerequisites
- Jabra Link 14201-10 electronic hook switch (EHS) cable
- DHSG connection cable from Aastra
- Aastra 53i / 55i / 57i / 57iCT / 6753i / 6755i / 6757i / 6757iCT phone with firmware version 2.5.1.2000 or later
To connect your headset
- Plug the RJ10 connector (green) from the split end of the Aastra DHSG cable into the headset socket/port on the desk phone.
- Plug the RJ45 connector (yellow) from the split end of the Aastra DHSG cable into the socket/port for the expansion module on the desk phone.
- Plug the single end of the Aastra DHSG cable (blue) into the Aastra RJ45 adapter.
- Plug the single end of the Jabra Link 14201-10 cable (blue) into the free socket on the Aastra RJ45 adapter.
- Connect the 2-sided end of the Jabra Link 14201-10 cable to the Jabra base as follows:
- a. Plug the RJ10 (small) connector into the socket/port with the blue phone icon.
- b. Plug the RJ45 (wide) connector into the socket marked AUX.
To configure your headset when connecting to a desk phone for the first time:
- For the Jabra Engage 75, follow the onscreen setup wizard on the base.
- For the Jabra Engage 65, the initial setup is complete after connecting the cables.
- See the user manual located in the Technical Documents section for more details about setting up the desk phone.
- Use Jabra Direct, the computer application that is available free of charge, to learn more about your Jabra product. Use Jabra Direct to adjust features and functions according to personal preference or company requirements. Also ensure your Jabra product is updated to get the latest performance. Visit jabra.com/direct for more information.
Note:
Additional setup information for your Jabra products:
- EHS cable/adapter type: DHSG.
- Clear dial tone switch: set to position “A”.
- We recommend setting the microphone volume to “7” out of 13.
Phone settings
- For Aastra desk phones with firmware version 2.5.1.2000, the DHSG mode is deactivated by default. Activate it by using Aastra.cfg or mac.cfg with the command “dhsg:1”.
- Make sure you set the audio mode to “Headset/Speaker”. Access the phone settings by navigating to Options>Default settings>Audio settings>Audio mode>Headset/Speaker.
Note: There is no possibility for remote call control if you are using an expansion keypad.
Documents / Resources
|
Jabra Engage 75 Wireless
Earbuds
[pdf] User Manual
Engage 75 Wireless Earbuds, Engage 75, Wireless Earbuds, Earbuds
---|---
References
- [FAQTitle] | Jabra Engage 75 Convertible | FAQ | Jabra Support
- How do I connect my Jabra Engage with my Aastra 53i, 55i, 57i, 6753i, 6755i, 6757i desk phone so I have remote call control using my headset? | Jabra Engage 75 Convertible | FAQ | Jabra Support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>