V-TAC Wooden Pendant VT-4280 Installation Guide
- June 7, 2024
- V TAC
Table of Contents
WEEE Number 80133970
INSTALLATION INSTRUCTION WOODEN PENDANT (VT-4280)
TECHNICAL DATA
| SKU | 40541 |
|---|---|
| MODEL | VT-4280 |
| MAX RATED WATTS | 60W |
| BASE | E27 (Bulb not included) |
| MATERIAL | WOOD |
| WIRE LENGTH | 1 METER |
| IP RATING | I P20 |
| INPUT VOLTAGE | AC: 220-240V, 50Hz |
INTRODUCTION & WARRANTY
Thank you for selecting and buying the V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any other queries, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at your best. The warranty is valid for 5 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours of Daily operation. Usage of product for 24 hours a day would void the warranty. This product is warranted for manufacturing defects only.
WARNING!
- Please turn off the power and read this instruction before starting the installation.
- Please turn the power off before changing the bulb and cleaning the fixture.
- Installation should only be done by a certified electrician.
- For Indoor Use only
| This marking indicates that this product should not be disposed of with
other household wastes.| | Caution, risk of electric shock.
---|---|---|---
INSTALLATION DIAGRAM
- Use screws to fix the mounting bar to the junction box.
- Make the wire connections with connectors.
- Connect the live wire (L) from fitting to the live wire from the main power supply.
- Connect the neutral wire (N) from fitting to the neutral wire from the main power supply.
- Please pay close attention and make sure the wires are not exposed outside when wiring
- Use screws to fix the canopy to the mounting bar.
- Use socket ring to fix shade to the socket.
- Install the bulb (not included) at recommended wattage to the socket.
- Check if the installation is completed and turn on the power.
n case of any query/issue with the product, please reach out to us at: support@v-tac.eu For More products range, Inquiry please contact our distributor or nearest dealers. V-TAC EUROPE LTO. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>