HIKVISION DS-3E2510P Gigabit Full Managed PoE Switch User Guide
- June 7, 2024
- Hikvision
Table of Contents
HIKVISION DS-3E2510P Gigabit Full Managed PoE Switch User Guide
Features and Functions
- DS-3E2510P supports the telecom-level Ethernet-ring protection protocol with a protection shift time of less than 50ms, STP/RSTP, backup of active and standby uplinks, and LACP link aggregation to cater to the requirements of high reliability of carriers;
- DS-3E2510P has powerful ACL functions to access and control L2-L7 data, providing carriers flexible and various policy control methods;
- DS-3E2510P supports In-Service Software Upgrade (ISSU) to ensure the unremitting data forwarding during system upgrade;
- DS-3E2510P supports various L2 multicast functions such as IGMP-snooping, user fast-leave mechanism and trans-vlan multicast copy;
- DS-3E2510P supports IEEE 802.3AF/AT standard, built-in large power supply, no need of external power supply, that is, 24-port AF full-load power supply.
- DS-3E2510P supports the configuration of Base-T port priority when the power is inadequate.
- DS-3E2510P supports POE port and up to 4KV power thunder-proof.
- DS-3E2510P supports priority retagging and complicated flow classification based on VLAN, MAC, source address, destination address, IP or priority to better streamline carrier’s services;
- DS-3E2510P provides flexible bandwidth control policies, supporting port-/flow-based flow limit, and ensuring the line speed forwarding of each port to make sure the high quality of network services;
- DS-3E2510P supports multiple queue schedule algorithms such as SP, WRR, or “SP plus WRR”;
- Equipment-level security: The advanced hardware infrastructure design realizes the level-based packet schedule and packet protection, prevents DoS-/TCP-related SYN Flood, UDP Flood, Broadcast Storm or large traffic attacks, and supports level-based command line protection, endowing different levels of users with different management permissions;
- Perfect security authentication mechanisms: IEEE 802.1x, Radius and BDTacacs+;
- DS-3E2510P supports storm/multicast/unicast limit which ensures the normal running of equipment in harsh network conditions;
- DS-3E2510P supports perfect ring detection mechanism which ensures the long-term stable running of network;
- DS-3E2510P supports port isolation within the same VLAN, DHCP-Snooping, and IP plus MAC plus Port binding for ensuring user data security;
- DS-3E2510P supports many management modes such as the console port, Telnet, SSH;
- DS-3E2510P supports the WEB management mode, which is easy and efficient so that it makes installation and debugging convenient;
- DS-3E2510P supports TFTP-patterned file upload/download management;
Specifications
| Item | DS-3E2510P |
|---|---|
| Port number | 8 x 10/100/1000Base-T PoE ports, 2 1000Base-X SFP ports, 1 |
Console port
Switching capacity| 20Gbps
Packet forwarding rate| 15Mpps
MAC address table| 8K
Dimensions(L × H × D)| 280 mm × 45 mm × 179 mm
Consumption| <15W
POE standard| IEEE802.3af, IEEE802.3at
POE power budget| 125W
Power supply| AC：100V-240V，50Hz±10%
Environment| Operating temperature/humidity: 0℃-45℃，5%-95% non-condensing
Storage temperature/humidity: -20℃-70℃；5%-95% non-condensing
MAC exchange| Static configuration and dynamic MAC learning; MAC browsing and
removal Configurable aging time of the MAC address; Limited number of
learnable MAC addresses; MAC filtration
VLAN| 4K VLAN; GVRP; QinQ; Private VLAN
STP| 802.1D (STP), 802.1W (RSTP) and 802.1S (MSTP)
BPDU protection, root protection, and loopback protection
Multicast| IGMP v1/v2/v3 IGMP snooping IGMP Fast Leave
Multicast group strategy and quantity limitation
QoS| Flow classification based on L2~4 protocols CAR flow limit
802.1P/DSCP priority re-labeling SP, WRR, and “SP+WRR”
Congestion avoidance mechanisms like Tail-Drop and WRED
Flow monitoring and flow shaping
Security| L2/L3/L4 ACL flow identification and filtration
DDoS attack prevention, TCP’s SYN Flood attack prevention, UDP Flood attack prevention, etc
Broadcast/multicast/unknown unicast storm-control Port isolation
Port security, and “IP+MAC+port” binding
Reliability| Static/LACP link aggregation
EAPS and ERPS
Management| Console, Telnet, SSH2.0, Web SNMP v1/v2/v3
TFTP
RMON
Physical Interfaces
Front Panel
| No. | Abbrev. | Name | Remarks |
|---|---|---|---|
| **** 1 | **** PWR | **** power indicator | **** If the switch is powered on, |
the indicator is on.
2| RESET| RESET| Resume to the default setting.
3| SYS| System indicator| If the indicator is always on, the
system is started up. If the indicator flickers, the system works normally.
4| PoE| PoE indicator
corresponding to each port
| **** If the indicator is always on, the PoE works normally.
**** If the indicator is off, the PoE does not work.
5| Lnk/Act| Lnk/Act indicator corresponding to each port| Green indicator is on: 10/100M is transmitted; Red indicator is on: 1000M is transmitted;
No indicator is on: no signal is transmitted.
6| /| RJ45 interfaces| Realizes the PoE function and forwards 10/100/1000M
**** Ethernet electrical signals
7| Console| Console| Manages the switch locally.
8| /| 2 SFP ports| **** Realizes the forward of gigabit Ethernet
optical signals.
Headquarters
No.555 Qianmo Road, Binjiang District,
Hangzhou 310051, China
T +86-571-8807-5998
overseasbusiness®hilwision.com
Hikvision USA
T +1-909-89S-0400
sates.usa@hilwision.com
Hikvision Italy
T 439-0438-6902 infait@hikvision.com
Hikvision Singapore
T +65-668L1-4718
sa@hikvision.com
Hikvision Europe
T +31-23-5542770 sateseuro@hiWision.com
Hikvision France
T +33(011-85-330-444 infafr©hilwision.com
Hikvision Oceania
T +61-2-8599-4233
salesal@hikvision.com
Hikvision Middle East
T +971-L1-8816086
salesme@hikvision. corn
Hikvision Spain
T +34-91-737-16-55
info.es@hikvision.com
Hikvision Hong Kong
T +852-2151-1761
Hikvision Russia
T +7-495-669-67-99
saleru®hikvision.corn
Hikvision Poland
T 4118-22-460-01-50
potandOhikvision.com
Hikvision Canada
T +1-909-895-0400
Hikvision India
T +91-22-281469900
sales@pramahikvision.com
Hikvision UK
T +4i-1628-9021-Li
support.uk@hikvision.com