Plancha Enosign-65-80 Instructions

PLANCHA® ENSIGN – 65 – 80

INSTRUCTION FOR USE

Please read carefully these instructions, prior to any use of the product

Burner| Nominal
Output
(kW)| Low
setting
(kW)| Butane 28 – 30 mbar (G30)
Propane 30 – 37 mbar (G31)| Natural Gas 20 mbar (G20)
Natural Gas 25 mbar (G25)| Butane 50 mbar (G30)
Propane 50 mbar (G31)
---|---|---|---|---|---
Nozzle| Butane
Output
(g/h)| Propane
Output
(g/h)| Nozzle| G20
Output
(l/h)| Output
(l/h)
G25| Nozzle| Butane
Output
(g/h)| Propane
Output
(g/h)
ENSIGN 65| | 2 x 2,4 , =
4 8 kW| 2 x 0,8| 2 x80| 349| 343| 2 x 117| 457| 531| 2 x70| 349| 343
---|---|---|---|---|---|---|---|---|---|---|---|---
ENSIGN 80| | 3x 2, 1 =
6,3 kW| 3 x 0,8| 3 x75| 458| 450| 3 x 113| 600| 698| 3 x 67| 458| 450

Dear customer,
Plancha is a grill by contact ideal for a healthy cooking of any type of food: shellfish, fish, meat, vegetable… It has been used for a few years by the most famous ‘’chefs’’, and is now available in three sizes, 45 ; 60 & 75 cm, to go along with your relaxing moments with family and friends.
The ENO planchas are designed and manufactured in France. They are “Certified French Origin” guaranteed.
ENO is designing sustainable, recyclable quality products.
In order to fulfill your expectations, we have designed this item to be operated on all available gas cylinders or from a connection to natural gas.
The heat output of your Plancha is such that the support of your product must be made of an inflammable material:
concrete, fire-proof bricks, or ceramics. For your comfort, we have designed a specific and elegant range of trolleys.
Please ask your retailer for more details on these.
We ensure a two-year guarantee for parts and labor, starting from the purchasing date. Cast-iron hotplates and burners have a 10-year warranty from the purchase date. Our service department commits to ensuring the availability of parts during 5 years minimum after your purchase. However, we recommend strictly follow our technical instructions for use and maintenance. Not respecting these instructions may be dangerous or might generate serious damages to your product.
For your safety, we remind you that Plancha is for outdoor use and that no flammable material must be in a radius of ca 0,50 m around and beneath the product. We also recommend not to store any flammable liquid or vapors next to the product.
In case you notice a gas smell, you have to shut the valve of the gas cylinder or the connection to natural gas. When not using the Plancha, shut as well the valve of a gas cylinder or connection to natural gas.
We thank you for the confidence in buying an ENO product, which has been designed to give you the best satisfaction every time you use it.

LEGAL CONDITIONS

YOUR PRODUCT CAN ONLY BE INSTALLED OUTDOOR PLANCHA is not equipped with an exhaust system for burnt material.
It must be installed and connected according to current legal installation rules.
Special attention will be paid to rules about air ventilation. An input of 15 m3 / h of fresh air is required for the feeding in combustion air.

CAREFUL :
– Accessible parts can be very warm, keep young children away.
– This appliance must be kept away from flammable materials during use.
– It may be dangerous to modify any part of the product
– Do not move the product
– After use, shut gas valve on cylinder or wall (Natural gas)
– Wait until it is cold before cleaning
– Do not use an adjustable regulator
– Do not modify the appliance
– We advise using 6 or 13 kg cylinders (Butane or Propane) along with a safe regulator. This item can also operate with natural gas (Ask advice from your retailer)
– The bowl must be handled when the product is cold
– The length of the flexible hose between the product and the gas tank must not exceed 1,50 m.

CHOOSING GAS :

Your PLANCHA is adjusted in the factory for butane/propane 28 / 37 mbar use according to information a data badge. In case of use of natural gas, ask to advise from your retailer or contact our after-sales service to receive the right nozzles.
CAREFUL: In the case of use of natural gas, it is strictly forbidden to put your PLANCHA on a mobile table or a trolley. Your product must be fixed.

GAS CONNECTION

Two keys are necessary one for the side of the gas inlet, the other on the side to screw To ensure a proper set up, avoid twisting or curves the rubber tube.
Changing containers must never be undertaken in the presence of a naked flame.

Connection for use in category I3+ (Butane / Propane)
The product must be connected on the side, close to the knob
For butane (G30), use a safety regulator NF 28 mbar
– Flexible metal hose NFD 36 -125 (Length 1 m)
– Flexible hose XPD 36 – 112 (Length 1 m)
– Flexible hose with two clips XPD 36 – 110 (Length 1 m)
For propane (G 31), use a safety regulator NF 37 mbar
– Flexible metal hose NFD 36 – 125 (Length 1 m)
– Flexible hose XPD 36 – 112 (Length 1 m)
The tightness must be checked with soapy water after opening the cylinder. No bubble shows a good tightness.
DANGER: Never check tightness with a flame.
Connection for use in category I2E + (Natural gas).
You can receive an advice from your retailer or from our after-sales service

For natural gas (G 20)
– Flexible metal hose NFD 36 – 121
– Flexible hose NFD 36 – 103
The hose must be corresponding to standards and be visible on its whole length (From the wall valve to product), it must be as
well easy to reach.
The tightness must be checked with soapy water after opening of the wall valve. No bubble shows a good tightness.
DANGER: Never check tightness with a flame. it is strictly forbidden to use a connector for butane gas.

BEFORE USE

– Before positioning your grill on your plancha, install the battery; spring and plug. (See paragraph VI)
– Check tightness, if you notice a leakage, shut the gas inlet
– Check that hose cannot be in contact with parts of the product that can become warm
– If you have equipped your product with a lid against dust or humidity, check that this one is removed
– Before the first use, operate empty PLANCHA for 15 minutes (A light smell can be noticed for a while)
– The bowl to receive juices must be handled when cold
– Before any cooking preheat for 10 minutes (Knobs on the bigger flame)

IGNITING YOUR PLANCHA

The burner is operated by a safety valve with FFO, equipped with an operating knob and an ignitor.
The knob bears an indication of valve position
– Open butane or propane cylinder or wall valve if using natural gas
– Your product is equipped with a locking valve in off position (Mark is clearly indicated with a full disk) giving a total security
– Press the knob and rotate it towards big flame (Sparkle symbol). Then operate the ignitor, a click can be heard and the sparkle ignites the burner, keep the knob pressed for 10 seconds to activate the security. Check that burner is well ignited
– Release the knob. If the burner does not remain ignited, start operation again. Then adjust the length of the film by rotating the knob toward the small flame symbol. To shut the PLANCHA, rotate the knob toward off position (Full disk)
NOTICE: In case the igniter is not working properly, a hole in the front enables to ignite the burner with a long match.

BATTERY REPLACEMENT

– The battery holder is under the plancha, to replace it, remove the plate and the lid, return the appliance and unscrew the black cap
anticlockwise, replace the 1,5V R6 type battery.
– Reassembly in the reverse mode.
– If you don’t use your plancha for a long time, it is advisable to remove the battery.

MAINTENANCE OF YOUR PLANCHA

GREASE TRAY CLEANING: – To remove the grease tray, press above the gauge until you hear a click. You can clean the tray with dishwashing liquid or in the dishwasher. Once it’s clean, introduce the tray in the reverse opposite direction of disassembly.
Warm plancha: during cooking, let food grill for a few seconds until slightly brown; this is the so-said “Maillard Effect” caramelization of juices.
Unstick the food from the plate with the ENO spatula and turn it to caramelize both sides. Then gently cook the food over low heat. You’ll get juicy, slightly crunchy, and very tasty cooking.
Between cookings: scrape the hotplate with the ENO spatula to remove residues, scratch with the ENO stainless ball, and wipe with an absorbing cloth. Your plancha is ready for the following dish.
After cooking: before your plancha cools, scrape the hotplate with the ENO spatula. If the plate is very dirty, pour a little water and scrape to remove residues. Use the ENO stainless ball to clean the hotplate and wipe with an absorbing cloth.
Cold plancha: apply Plancha Cleaner with the stainless ball and a little water, then wipe with the ENO microfiber cloth : your plancha will resume its original shine.
More user tips and recipes on YouTube PLANCHAENO

When you do not use any longer your PLANCHA, store it in a dry place or cover it with a plastic bag (Once it is completely cold)
Regularly check your hose. Do not hesitate to change it if any doubt (Check validity date)
Do not twist the gas hose and keep it away from any part that might be warm.
To remain in good condition, it requires a minimum care
Each product is checked all along the manufacturing process.
If something unnormal occurs, please check that all instructions have been carefully respected. Especially check that the regulator used is corresponding to gas and pressure from your cylinder and that the data badge on a product is corresponding to the gas you are using.
Not respecting these rules might damage your product.

If not used for a long period, check that the burner venturi tube is not blocked

1. Remove grilling plate
2. Unclip the burner cap
3. Check that burner is not blocked
   If venturi tube is blocked, take the dirt away and reassemble the whole.

CONTRACT GUARANTEE

In case of a problem, contact the retailer from whom you bought the Plancha from.
This product is guaranteed 2 years from the date of purchase, against all manufacturing or operating failures.
Hotplate: lifetime guarantee
Burners: 10 years limited guarantee valid from date of purchase
During this guarantee, ENO after-sales department takes the charge of the cost of parts and labor to fix the product.
To operate this guarantee, you have to show the purchasing invoice and the guarantee sheet duly filled and bring the product back to your retailer in its original packaging with proper over-packing.
Prior to the guarantee exercise, your retailer will have to give his formal agreement.

EXCLUSIONS OF GUARANTEE

This guarantee does not cover incidents due to bad maintenance or faulty use: fall, shock, a mistake in connection…
Guarantee of enameled plate excludes damages resulting from the following circumstances:

– Fall or shock
– Wrong use or not in conformity with users instructions
– Lack of maintenance or cleaning
– Use of corrosive detergents is not suitable with enameled surfaces.
– Adaptation not complying with safety regulations

This guarantee is not applied if a person or company not duly entitled by ENO has made repairs or interventions.
Availability of parts is guaranteed during 5 years minimum.
Freight and packaging costs are taken over by customers. Returns carriage forward are not accepted. Once the product is repaired, damages in transport are not covered by this guarantee. Les dommages subis pendant le transport des appareils, une fois réparés, ne sont pas couverts par cette garantie. They must be confirmed by registered mail to the transport company within 3 days. We cannot ensure a guarantee in case these prescriptions are not respected.
In case of dispute, the only recognized jurisdiction is the Court of Commerce in NIORT- FRANCE (This clause is considered as essential without which, this guarantee should not exist).

LEGAL GUARANTEE

The dispositions of this guarantee do not exclude the benefit for the purchaser of the legal guarantee against defaults and flaws which is generally applicable by law.

SERVICE CONTROLE
Enosign 65 → 5702
Enosign 80 → 5703
MARQUAGE ≡ 1312
1312 CU 6387

www.eno.fr

References

• Site Officiel ENO - Europe - Planchas gaz, chariots et accessoires

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>